dts: update to v4.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 30 insertions, 0 deletions

diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 1685821eea..de1378b4ef 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -28,6 +28,20 @@ Required properties:
 - reg: Should contain the register physical address and length for the
   pin controller.
 
+- clocks: phandle to the clocks feeding the pin controller:
+  - "apb": the gated APB parent clock
+  - "hosc": the high frequency oscillator in the system
+  - "losc": the low frequency oscillator in the system
+
+Note: For backward compatibility reasons, the hosc and losc clocks are only
+required if you need to use the optional input-debounce property. Any new
+device tree should set them.
+
+Optional properties:
+  - input-debounce: Array of debouncing periods in microseconds. One period per
+    irq bank found in the controller. 0 if no setup required.
+
+
 Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices.
 
@@ -37,6 +51,22 @@ pins it needs, and how they should be configured, with regard to muxer
 configuration, drive strength and pullups. If one of these options is
 not set, its actual value will be unspecified.
 
+This driver supports the generic pin multiplexing and configuration
+bindings. For details on each properties, you can refer to
+./pinctrl-bindings.txt.
+
+Required sub-node properties:
+  - pins
+  - function
+
+Optional sub-node properties:
+  - bias-disable
+  - bias-pull-up
+  - bias-pull-down
+  - drive-strength
+
+*** Deprecated pin configuration and multiplexing binding
+
 Required subnode-properties:
 
 - allwinner,pins: List of strings containing the pin name.