path: root/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
diff options
authorSascha Hauer <>2015-07-08 14:44:21 +0200
committerSascha Hauer <>2015-07-08 14:44:21 +0200
commit87360e3dd42bb627a9f2611f961728c0789e1c21 (patch)
treeafefc88c862d9feafb0cdb075badeb8d32d8efd2 /dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
parent80936d6aaeea1b10ce4eb81c54eece2f55f8e209 (diff)
dts: update to v4.2-rc1
Signed-off-by: Sascha Hauer <>
Diffstat (limited to 'dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt')
1 files changed, 97 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
new file mode 100644
index 0000000000..e89b467756
--- /dev/null
+++ b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -0,0 +1,97 @@
+Lantiq XWAY pinmux controller
+Required properties:
+- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+We support 2 types of nodes.
+Definition of mux function groups:
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+Valid values for group and function names:
+ mux groups:
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+ ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
+ spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
+ gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
+ req3
+ additional mux groups (XR9 only):
+ mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
+Definition of pin configurations:
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+ 0: none, 1: down, 2: up.
+- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
+Valid values for XWAY pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+Valid values for XR9 pin names:
+ Pinconf pins can be referenced via the names io0-io55.
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };