summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-09-01 09:47:17 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-09-02 11:01:29 +0200
commita595ff6eea05b919567f96d71e7e2c7b6236b8ac (patch)
tree2d7cea529b6a06be744116e29e8a97b0c8de1981 /dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
parent7955f4315187665690f51e20698d4c12c68e008f (diff)
downloadbarebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.gz
barebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.xz
dts: update to v3.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt')
-rw-r--r--dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt181
1 files changed, 181 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
new file mode 100644
index 0000000000..93b7de91b9
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -0,0 +1,181 @@
+Qualcomm MSM8960 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,msm8960-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio151,
+ sdc1_clk,
+ sdc1_cmd,
+ sdc1_data
+ sdc3_clk,
+ sdc3_cmd,
+ sdc3_data
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+ codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+ gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a,
+ gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio,
+ gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+ gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+ gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+ gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+ gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10,
+ gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n,
+ gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n,
+ gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data,
+ hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s,
+ pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5,
+ slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps,
+ ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc,
+ usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe,
+ usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b,
+ vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b,
+ vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c,
+ vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a,
+ vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a,
+ vfe_camif_timer7_b, vfe_camif_timer7_c, wlan
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0x4>;
+
+ gsbi8_uart: gsbi8-uart {
+ mux {
+ pins = "gpio34", "gpio35";
+ function = "gsbi8";
+ };
+
+ tx {
+ pins = "gpio34";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio35";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };