summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-06-21 13:44:30 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-06-22 08:16:13 +0200
commite4067b75fb6ca83a58b2c342a0b3ee12e1223c4e (patch)
treebe013bf46292f4696ac776bc91c1cf35b7adab24 /dts/Bindings/pinctrl
parentfe040e0977fab29216f5039e8f9b04e6dbec859a (diff)
downloadbarebox-e4067b75fb6ca83a58b2c342a0b3ee12e1223c4e.tar.gz
dts: update to v4.18-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pinctrl')
-rw-r--r--dts/Bindings/pinctrl/actions,s900-pinctrl.txt16
-rw-r--r--dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt1
-rw-r--r--dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt18
-rw-r--r--dts/Bindings/pinctrl/meson,pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/pinctrl-max77620.txt4
-rw-r--r--dts/Bindings/pinctrl/pinctrl-mcp23s08.txt8
-rw-r--r--dts/Bindings/pinctrl/pinctrl-mt7622.txt10
-rw-r--r--dts/Bindings/pinctrl/pinctrl-rk805.txt4
-rw-r--r--dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/rockchip,pinctrl.txt1
10 files changed, 59 insertions, 7 deletions
diff --git a/dts/Bindings/pinctrl/actions,s900-pinctrl.txt b/dts/Bindings/pinctrl/actions,s900-pinctrl.txt
index fb87c7d..8fb5a53 100644
--- a/dts/Bindings/pinctrl/actions,s900-pinctrl.txt
+++ b/dts/Bindings/pinctrl/actions,s900-pinctrl.txt
@@ -8,6 +8,17 @@ Required Properties:
- reg: Should contain the register base address and size of
the pin controller.
- clocks: phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+ pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+ and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt. Shall be set to 2. The first cell
+ defines the interrupt number, the second encodes
+ the trigger flags described in
+ bindings/interrupt-controller/interrupts.txt
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
@@ -164,6 +175,11 @@ Example:
compatible = "actions,s900-pinctrl";
reg = <0x0 0xe01b0000 0x0 0x1000>;
clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
uart2-default: uart2-default {
pinmux {
diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 64bc5c2..258a464 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -28,6 +28,7 @@ Required properties:
"allwinner,sun50i-a64-r-pinctrl"
"allwinner,sun50i-h5-pinctrl"
"allwinner,sun50i-h6-pinctrl"
+ "allwinner,sun50i-h6-r-pinctrl"
"nextthing,gr8-pinctrl"
- reg: Should contain the register physical address and length for the
diff --git a/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt b/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt
index 2569866..3fac0a0 100644
--- a/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -36,6 +36,24 @@ listed. In other words, a subnode that lists only a mux function implies no
information about any pull configuration. Similarly, a subnode that lists only
a pul parameter implies no information about the mux function.
+The BCM2835 pin configuration and multiplexing supports the generic bindings.
+For details on each properties, you can refer to ./pinctrl-bindings.txt.
+
+Required sub-node properties:
+ - pins
+ - function
+
+Optional sub-node properties:
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - output-high
+ - output-low
+
+Legacy pin configuration and multiplexing binding:
+*** (Its use is deprecated, use generic multiplexing and configuration
+bindings instead)
+
Required subnode-properties:
- brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs
are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53.
diff --git a/dts/Bindings/pinctrl/meson,pinctrl.txt b/dts/Bindings/pinctrl/meson,pinctrl.txt
index 2c12f97..54ecb8a 100644
--- a/dts/Bindings/pinctrl/meson,pinctrl.txt
+++ b/dts/Bindings/pinctrl/meson,pinctrl.txt
@@ -3,8 +3,10 @@
Required properties for the root node:
- compatible: one of "amlogic,meson8-cbus-pinctrl"
"amlogic,meson8b-cbus-pinctrl"
+ "amlogic,meson8m2-cbus-pinctrl"
"amlogic,meson8-aobus-pinctrl"
"amlogic,meson8b-aobus-pinctrl"
+ "amlogic,meson8m2-aobus-pinctrl"
"amlogic,meson-gxbb-periphs-pinctrl"
"amlogic,meson-gxbb-aobus-pinctrl"
"amlogic,meson-gxl-periphs-pinctrl"
diff --git a/dts/Bindings/pinctrl/pinctrl-max77620.txt b/dts/Bindings/pinctrl/pinctrl-max77620.txt
index ad4fce3..511fc23 100644
--- a/dts/Bindings/pinctrl/pinctrl-max77620.txt
+++ b/dts/Bindings/pinctrl/pinctrl-max77620.txt
@@ -11,9 +11,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/dts/Bindings/pinctrl/pinctrl-mcp23s08.txt b/dts/Bindings/pinctrl/pinctrl-mcp23s08.txt
index a5a8322..625a22e 100644
--- a/dts/Bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/dts/Bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -18,7 +18,9 @@ Required properties:
removed.
- #gpio-cells : Should be two.
- first cell is the pin number
- - second cell is used to specify flags. Flags are currently unused.
+ - second cell is used to specify flags as described in
+ 'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by
+ 'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW).
- gpio-controller : Marks the device node as a GPIO controller.
- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
SPI uses this to specify the chipselect line which the chip is
@@ -99,9 +101,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/dts/Bindings/pinctrl/pinctrl-mt7622.txt b/dts/Bindings/pinctrl/pinctrl-mt7622.txt
index f18ed99..def8fca 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt7622.txt
+++ b/dts/Bindings/pinctrl/pinctrl-mt7622.txt
@@ -9,6 +9,16 @@ Required properties for the root node:
- #gpio-cells: Should be two. The first cell is the pin number and the
second is the GPIO flags.
+Optional properties:
+- interrupt-controller : Marks the device node as an interrupt controller
+
+If the property interrupt-controller is defined, following property is required
+- reg-names: A string describing the "reg" entries. Must contain "eint".
+- interrupts : The interrupt output from the controller.
+- #interrupt-cells: Should be two.
+- interrupt-parent: Phandle of the interrupt parent to which the external
+ GPIO interrupts are forwarded to.
+
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
diff --git a/dts/Bindings/pinctrl/pinctrl-rk805.txt b/dts/Bindings/pinctrl/pinctrl-rk805.txt
index eee3dc2..cbcbd31 100644
--- a/dts/Bindings/pinctrl/pinctrl-rk805.txt
+++ b/dts/Bindings/pinctrl/pinctrl-rk805.txt
@@ -10,9 +10,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index 892d8fd..abd8fbc 100644
--- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -15,6 +15,7 @@ Required Properties:
- "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
- "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
- "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
+ - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
- "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
@@ -27,6 +28,7 @@ Required Properties:
- "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
- "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
- "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
+ - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
- "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
- "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
index a01a3b8..0919db2 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
@@ -20,6 +20,7 @@ defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: should be
+ "rockchip,px30-pinctrl": for Rockchip PX30
"rockchip,rv1108-pinctrl": for Rockchip RV1108
"rockchip,rk2928-pinctrl": for Rockchip RK2928
"rockchip,rk3066a-pinctrl": for Rockchip RK3066a