dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 111 insertions, 2 deletions

diff --git a/dts/Bindings/power/supply/axp20x_ac_power.txt b/dts/Bindings/power/supply/axp20x_ac_power.txt
new file mode 100644
index 0000000000..826e8a8791
--- /dev/null
+++ b/dts/Bindings/power/supply/axp20x_ac_power.txt
@@ -0,0 +1,22 @@
+AXP20X and AXP22X PMICs' AC power supply
+
+Required Properties:
+ - compatible: One of:
+			"x-powers,axp202-ac-power-supply"
+			"x-powers,axp221-ac-power-supply"
+
+This node is a subnode of the axp20x PMIC.
+
+The AXP20X can read the current current and voltage supplied by AC by
+reading ADC channels from the AXP20X ADC.
+
+The AXP22X is only able to tell if an AC power supply is present and
+usable.
+
+Example:
+
+&axp209 {
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+	};
+};
diff --git a/dts/Bindings/power/supply/axp20x_usb_power.txt b/dts/Bindings/power/supply/axp20x_usb_power.txt
index f1d7beec45..ba8d35f66c 100644
--- a/dts/Bindings/power/supply/axp20x_usb_power.txt
+++ b/dts/Bindings/power/supply/axp20x_usb_power.txt
@@ -3,6 +3,11 @@ AXP20x USB power supply
 Required Properties:
 -compatible: One of: "x-powers,axp202-usb-power-supply"
                      "x-powers,axp221-usb-power-supply"
+                     "x-powers,axp223-usb-power-supply"
+
+The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+variations such as the former being able to set the VBUS power supply max
+current to 100mA, unlike the latter.
 
 This node is a subnode of the axp20x PMIC.
 
diff --git a/dts/Bindings/power/supply/bq27xxx.txt b/dts/Bindings/power/supply/bq27xxx.txt
new file mode 100644
index 0000000000..b0c95ef63e
--- /dev/null
+++ b/dts/Bindings/power/supply/bq27xxx.txt
@@ -0,0 +1,36 @@
+Binding for TI BQ27XXX fuel gauge family
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq27200" - BQ27200
+ * "ti,bq27210" - BQ27210
+ * "ti,bq27500" - deprecated, use revision specific property below
+ * "ti,bq27510" - deprecated, use revision specific property below
+ * "ti,bq27520" - deprecated, use revision specific property below
+ * "ti,bq27500-1" - BQ27500/1
+ * "ti,bq27510g1" - BQ27510-g1
+ * "ti,bq27510g2" - BQ27510-g2
+ * "ti,bq27510g3" - BQ27510-g3
+ * "ti,bq27520g1" - BQ27520-g1
+ * "ti,bq27520g2" - BQ27520-g2
+ * "ti,bq27520g3" - BQ27520-g3
+ * "ti,bq27520g4" - BQ27520-g4
+ * "ti,bq27530" - BQ27530
+ * "ti,bq27531" - BQ27531
+ * "ti,bq27541" - BQ27541
+ * "ti,bq27542" - BQ27542
+ * "ti,bq27546" - BQ27546
+ * "ti,bq27742" - BQ27742
+ * "ti,bq27545" - BQ27545
+ * "ti,bq27421" - BQ27421
+ * "ti,bq27425" - BQ27425
+ * "ti,bq27441" - BQ27441
+ * "ti,bq27621" - BQ27621
+- reg: integer, i2c address of the device.
+
+Example:
+
+bq27510g3 {
+    compatible = "ti,bq27510g3";
+    reg = <0x55>;
+};
diff --git a/dts/Bindings/power/supply/qcom_smbb.txt b/dts/Bindings/power/supply/qcom_smbb.txt
index 65b88fac85..06f8a5ddb6 100644
--- a/dts/Bindings/power/supply/qcom_smbb.txt
+++ b/dts/Bindings/power/supply/qcom_smbb.txt
@@ -105,6 +105,22 @@ PROPERTIES
                regulation must be done externally to fully comply with
                the JEITA safety guidelines if this flag is set.
 
+- usb_otg_in-supply:
+  Usage: optional
+  Value type: <phandle>
+  Description: Reference to the regulator supplying power to the USB_OTG_IN
+               pin.
+
+child nodes:
+- otg-vbus:
+  Usage: optional
+  Description: This node defines a regulator used to control the direction
+               of VBUS voltage - specifically: whether to supply voltage
+               to VBUS for host mode operation of the OTG port, or allow
+               input voltage from external VBUS for charging.  In the
+               hardware, the supply for this regulator comes from
+               usb_otg_in-supply.
+
 EXAMPLE
 charger@1000 {
        compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@ charger@1000 {
 
        qcom,fast-charge-current-limit = <1000000>;
        qcom,dc-charge-current-limit = <1000000>;
+       usb_otg_in-supply = <&pm8941_5vs1>;
+
+       otg-vbus {};
 };
diff --git a/dts/Bindings/power/supply/sbs_sbs-charger.txt b/dts/Bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000000..a3719623a9
--- /dev/null
+++ b/dts/Bindings/power/supply/sbs_sbs-charger.txt
@@ -0,0 +1,23 @@
+SBS sbs-charger
+~~~~~~~~~~
+
+Required properties:
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+     number compatible string might be used in order to take care of vendor
+     specific registers.
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+    conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
+    "interrupt-parent". If an interrupt is not provided the driver will switch
+    automatically to polling.
+
+Example:
+
+	ltc4100@9 {
+		compatible = "lltc,ltc4100", "sbs,sbs-charger";
+		reg = <0x9>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
diff --git a/dts/Bindings/power/supply/ti,bq24735.txt b/dts/Bindings/power/supply/ti,bq24735.txt
index 3bf55757ce..de45e1a2a4 100644
--- a/dts/Bindings/power/supply/ti,bq24735.txt
+++ b/dts/Bindings/power/supply/ti,bq24735.txt
@@ -8,8 +8,10 @@ Optional properties :
  - interrupts : Specify the interrupt to be used to trigger when the AC
    adapter is either plugged in or removed.
  - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
-   presence. This is a Host GPIO that is configured as an input and
-   connected to the bq24735.
+   status. This is a Host GPIO that is configured as an input and connected
+   to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
+   the GPIO must be active on AC adapter absence despite ACOK being active
+   (high) on AC adapter presence.
  - ti,charge-current : Used to control and set the charging current. This value
    must be between 128mA and 8.128A with a 64mA step resolution. The POR value
    is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
@@ -25,6 +27,8 @@ Optional properties :
  - ti,external-control : Indicates that the charger is configured externally
    and that the host should not attempt to enable/disable charging or set the
    charge voltage/current.
+ - poll-interval : In case 'interrupts' is not specified, poll AC adapter
+   presence with this interval (milliseconds).
 
 Example: