dts: update to v5.13-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

89 files changed, 2839 insertions, 1488 deletions

diff --git a/dts/Bindings/power/supply/ab8500/btemp.txt b/dts/Bindings/power/supply/ab8500/btemp.txt
deleted file mode 100644
index f181e46d8e..0000000000
--- a/dts/Bindings/power/supply/ab8500/btemp.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-=== AB8500 Battery Temperature Monitor Driver ===
-
-The properties below describes the node for btemp driver.
-
-Required Properties:
-- compatible = Shall be: "stericsson,ab8500-btemp"
-- battery = Shall be battery specific information
-
-	Example:
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-	};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/ab8500/chargalg.txt b/dts/Bindings/power/supply/ab8500/chargalg.txt
deleted file mode 100644
index 56636f9272..0000000000
--- a/dts/Bindings/power/supply/ab8500/chargalg.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-=== AB8500 Charging Algorithm Driver ===
-
-The properties below describes the node for chargalg driver.
-
-Required Properties:
-- compatible = Shall be: "stericsson,ab8500-chargalg"
-- battery = Shall be battery specific information
-
-Example:
-ab8500_chargalg {
-	compatible = "stericsson,ab8500-chargalg";
-	battery	   = <&ab8500_battery>;
-};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/ab8500/charger.txt b/dts/Bindings/power/supply/ab8500/charger.txt
deleted file mode 100644
index 24ada03e07..0000000000
--- a/dts/Bindings/power/supply/ab8500/charger.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-=== AB8500 Charger Driver ===
-
-Required Properties:
-- compatible = Shall be "stericsson,ab8500-charger"
-- battery = Shall be battery specific information
-	Example:
-	ab8500_charger {
-		compatible = "stericsson,ab8500-charger";
-		battery	   = <&ab8500_battery>;
-	};
-
-- vddadc-supply: Supply for USB and Main charger
-	Example:
-	ab8500-charger {
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-	}
-- autopower_cfg:
-	Boolean value depicting the presence of 'automatic poweron after powerloss'
-	Example:
-	ab8500-charger {
-		autopower_cfg;
-	};
-
-For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/act8945a-charger.txt b/dts/Bindings/power/supply/act8945a-charger.txt
deleted file mode 100644
index cb737a9e1f..0000000000
--- a/dts/Bindings/power/supply/act8945a-charger.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a-charger".
- - active-semi,chglev-gpios: charge current level phandle with args
-   as described in ../gpio/gpio.txt.
- - active-semi,lbo-gpios: specify the low battery voltage detect phandle
-   with args as as described in ../gpio/gpio.txt.
- - interrupts: <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.
-
-Optional properties:
- - active-semi,input-voltage-threshold-microvolt: unit: mV;
-   Specifies the charger's input over-voltage threshold value;
-   The value can be: 6600, 7000, 7500, 8000; default: 6600
- - active-semi,precondition-timeout: unit: minutes;
-   Specifies the charger's PRECONDITION safety timer setting value;
-   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
-   default: 40.
- - active-semi,total-timeout: unit: hours;
-   Specifies the charger's total safety timer setting value;
-   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
-   default: 3.
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};
diff --git a/dts/Bindings/power/supply/active-semi,act8945a-charger.yaml b/dts/Bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 0000000000..3f74bc1941
--- /dev/null
+++ b/dts/Bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: active-semi,act8945a-charger
+
+  interrupts:
+    maxItems: 1
+
+  active-semi,chglev-gpios:
+    maxItems: 1
+    description: charge current level GPIO
+
+  active-semi,lbo-gpios:
+    maxItems: 1
+    description: low battery voltage detect GPIO
+
+  active-semi,input-voltage-threshold-microvolt:
+    description: |
+      Specifies the charger's input over-voltage threshold value.
+      Despite the name, specified values are in millivolt (mV).
+      Defaults to 6.6 V
+    enum: [ 6600, 7000, 7500, 8000 ]
+
+  active-semi,precondition-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's PRECONDITION safety timer setting value in minutes.
+      If 0, it means to disable this timer.
+      Defaults to 40 minutes.
+    enum: [ 0, 40, 60, 80 ]
+
+  active-semi,total-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's total safety timer setting value in hours;
+      If 0, it means to disable this timer;
+      Defaults to 3 hours.
+    enum: [ 0, 3, 4, 5 ]
+
+required:
+  - compatible
+  - interrupts
+  - active-semi,chglev-gpios
+  - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "active-semi,act8945a-charger";
+        interrupt-parent = <&pioA>;
+        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+        active-semi,input-voltage-threshold-microvolt = <6600>;
+        active-semi,precondition-timeout = <40>;
+        active-semi,total-timeout = <3>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/axp20x_ac_power.txt b/dts/Bindings/power/supply/axp20x_ac_power.txt
deleted file mode 100644
index 7a1fb532ab..0000000000
--- a/dts/Bindings/power/supply/axp20x_ac_power.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-AXP20X and AXP22X PMICs' AC power supply
-
-Required Properties:
- - compatible: One of:
-			"x-powers,axp202-ac-power-supply"
-			"x-powers,axp221-ac-power-supply"
-			"x-powers,axp813-ac-power-supply"
-
-This node is a subnode of the axp20x PMIC.
-
-The AXP20X can read the current current and voltage supplied by AC by
-reading ADC channels from the AXP20X ADC.
-
-The AXP22X is only able to tell if an AC power supply is present and
-usable.
-
-AXP813/AXP803 are able to limit current and supply voltage
-
-Example:
-
-&axp209 {
-	ac_power_supply: ac-power-supply {
-		compatible = "x-powers,axp202-ac-power-supply";
-	};
-};
diff --git a/dts/Bindings/power/supply/axp20x_battery.txt b/dts/Bindings/power/supply/axp20x_battery.txt
deleted file mode 100644
index 41916f6990..0000000000
--- a/dts/Bindings/power/supply/axp20x_battery.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-AXP20x and AXP22x battery power supply
-
-Required Properties:
- - compatible, one of:
-			"x-powers,axp209-battery-power-supply"
-			"x-powers,axp221-battery-power-supply"
-			"x-powers,axp813-battery-power-supply"
-
-This node is a subnode of its respective PMIC DT node.
-
-The supported devices can read the battery voltage, charge and discharge
-currents of the battery by reading ADC channels from the ADC.
-
-Example:
-
-&axp209 {
-	battery_power_supply: battery-power-supply {
-		compatible = "x-powers,axp209-battery-power-supply";
-	}
-};
diff --git a/dts/Bindings/power/supply/axp20x_usb_power.txt b/dts/Bindings/power/supply/axp20x_usb_power.txt
deleted file mode 100644
index b2d4968fde..0000000000
--- a/dts/Bindings/power/supply/axp20x_usb_power.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-AXP20x USB power supply
-
-Required Properties:
--compatible: One of: "x-powers,axp202-usb-power-supply"
-                     "x-powers,axp221-usb-power-supply"
-                     "x-powers,axp223-usb-power-supply"
-		     "x-powers,axp813-usb-power-supply"
-
-The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
-variations such as the former being able to set the VBUS power supply max
-current to 100mA, unlike the latter.
-
-This node is a subnode of the axp20x PMIC.
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	regulators {
-		x-powers,dcdc-freq = <1500>;
-
-		vdd_cpu: dcdc2 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-name = "vdd-cpu";
-		};
-
-		...
-	};
-
-	usb-power-supply: usb-power-supply {
-		compatible = "x-powers,axp202-usb-power-supply";
-	};
-};
diff --git a/dts/Bindings/power/supply/battery.txt b/dts/Bindings/power/supply/battery.txt
deleted file mode 100644
index a9f80cc490..0000000000
--- a/dts/Bindings/power/supply/battery.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-The contents of this file has been moved to battery.yaml
-
-Please note that not all charger drivers respect all of the properties.
diff --git a/dts/Bindings/power/supply/bq2415x.txt b/dts/Bindings/power/supply/bq2415x.txt
deleted file mode 100644
index d0327f0b59..0000000000
--- a/dts/Bindings/power/supply/bq2415x.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Binding for TI bq2415x Li-Ion Charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "ti,bq24150"
- * "ti,bq24150"
- * "ti,bq24150a"
- * "ti,bq24151"
- * "ti,bq24151a"
- * "ti,bq24152"
- * "ti,bq24153"
- * "ti,bq24153a"
- * "ti,bq24155"
- * "ti,bq24156"
- * "ti,bq24156a"
- * "ti,bq24158"
-- reg:			   integer, i2c address of the device.
-- ti,current-limit:	   integer, initial maximum current charger can pull
-			   from power supply in mA.
-- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
-			   The chip will use slow precharge if battery voltage
-			   is below this value.
-- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
-- ti,charge-current:	   integer, maximum charging current in mA.
-- ti,termination-current:  integer, charge will be terminated when current in
-			   constant-voltage phase drops below this value (in mA).
-- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
-
-Optional properties:
-- ti,usb-charger-detection: phandle to usb charger detection device.
-			    (required for auto mode)
-
-Example from Nokia N900:
-
-bq24150a {
-	compatible = "ti,bq24150a";
-	reg = <0x6b>;
-
-	ti,current-limit = <100>;
-	ti,weak-battery-voltage = <3400>;
-	ti,battery-regulation-voltage = <4200>;
-	ti,charge-current = <650>;
-	ti,termination-current = <100>;
-	ti,resistor-sense = <68>;
-
-	ti,usb-charger-detection = <&isp1704>;
-};
diff --git a/dts/Bindings/power/supply/bq2415x.yaml b/dts/Bindings/power/supply/bq2415x.yaml
new file mode 100644
index 0000000000..f8461f06e6
--- /dev/null
+++ b/dts/Bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq2415x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for TI bq2415x Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24150
+      - ti,bq24150
+      - ti,bq24150a
+      - ti,bq24151
+      - ti,bq24151a
+      - ti,bq24152
+      - ti,bq24153
+      - ti,bq24153a
+      - ti,bq24155
+      - ti,bq24156
+      - ti,bq24156a
+      - ti,bq24158
+
+  reg:
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: initial maximum current charger can pull from power supply in mA.
+
+  ti,weak-battery-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      weak battery voltage threshold in mV.
+      The chip will use slow precharge if battery voltage is below this value.
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in mV.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in mA.
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase drops
+      below this value (in mA).
+
+  ti,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: value of sensing resistor in milliohm.
+
+  ti,usb-charger-detection:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to usb charger detection device (required for auto mode)
+
+required:
+  - compatible
+  - reg
+  - ti,current-limit
+  - ti,weak-battery-voltage
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq24150a";
+        reg = <0x6b>;
+
+        ti,current-limit = <100>;
+        ti,weak-battery-voltage = <3400>;
+        ti,battery-regulation-voltage = <4200>;
+        ti,charge-current = <650>;
+        ti,termination-current = <100>;
+        ti,resistor-sense = <68>;
+
+        ti,usb-charger-detection = <&isp1704>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/bq24190.txt b/dts/Bindings/power/supply/bq24190.txt
deleted file mode 100644
index ffe2be408b..0000000000
--- a/dts/Bindings/power/supply/bq24190.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-TI BQ24190 Li-Ion Battery Charger
-
-Required properties:
-- compatible: contains one of the following:
-    * "ti,bq24190"
-    * "ti,bq24192"
-    * "ti,bq24192i"
-    * "ti,bq24196"
-- reg: integer, I2C address of the charger.
-- interrupts[-extended]: configuration for charger INT pin.
-
-Optional properties:
-- monitored-battery: phandle of battery characteristics devicetree node
-  The charger uses the following battery properties:
-    + precharge-current-microamp: maximum charge current during precharge
-      phase (typically 20% of battery capacity).
-    + charge-term-current-microamp: a charge cycle terminates when the
-      battery voltage is above recharge threshold, and the current is below
-      this setting (typically 10% of battery capacity).
-  See also Documentation/devicetree/bindings/power/supply/battery.txt
-- ti,system-minimum-microvolt: when power is connected and the battery is below
-  minimum system voltage, the system will be regulated above this setting.
-
-child nodes:
-- usb-otg-vbus:
-  Usage: optional
-  Description: Regulator that is used to control the VBUS voltage direction for
-               either USB host mode or for charging on the OTG port.
-
-Notes:
-- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
-  charge current on USB SDP ports, among other features). To simulate this on
-  boards that wire the pin to a GPIO, set a gpio-hog.
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		precharge-current-microamp = <256000>;
-		charge-term-current-microamp = <128000>;
-		// etc.
-	};
-
-	bq24190: charger@6a {
-		compatible = "ti,bq24190";
-		reg = <0x6a>;
-		interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
-		monitored-battery = <&bat>;
-		ti,system-minimum-microvolt = <3200000>;
-
-		usb_otg_vbus: usb-otg-vbus { };
-	};
-
-	&twl_gpio {
-		otg {
-			gpio-hog;
-			gpios = <6 0>;
-			output-high;
-			line-name = "otg-gpio";
-		};
-	};
diff --git a/dts/Bindings/power/supply/bq24190.yaml b/dts/Bindings/power/supply/bq24190.yaml
new file mode 100644
index 0000000000..0d7cbbdf80
--- /dev/null
+++ b/dts/Bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq24190.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24190
+      - ti,bq24192
+      - ti,bq24192i
+      - ti,bq24196
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus:
+    type: object
+    description: |
+      Regulator that is used to control the VBUS voltage direction for
+      either USB host mode or for charging on the OTG port
+
+  ti,system-minimum-microvolt:
+    description: |
+      when power is connected and the battery is below minimum system voltage,
+      the system will be regulated above this setting.
+
+  omit-battery-class:
+    type: boolean
+    description: |
+      If this property is set, the operating system does not try to create a
+      battery device.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - precharge-current-microamp: maximum charge current during precharge phase
+                                    (typically 20% of battery capacity).
+      - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+                                      above recharge threshold, and the current is below this
+                                      setting (typically 10% of battery capacity).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bat: battery {
+      compatible = "simple-battery";
+      precharge-current-microamp = <256000>;
+      charge-term-current-microamp = <128000>;
+    };
+
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24190";
+        reg = <0x6a>;
+        interrupt-parent = <&gpiochip>;
+        interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+        monitored-battery = <&bat>;
+        ti,system-minimum-microvolt = <3200000>;
+
+        usb_otg_vbus: usb-otg-vbus { };
+      };
+    };
diff --git a/dts/Bindings/power/supply/bq24257.txt b/dts/Bindings/power/supply/bq24257.txt
deleted file mode 100644
index f8f5a1685b..0000000000
--- a/dts/Bindings/power/supply/bq24257.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "ti,bq24250"
- * "ti,bq24251"
- * "ti,bq24257"
-- reg: integer, i2c address of the device.
-- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
-    conjunction with "interrupt-parent".
-- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
-- ti,charge-current: integer, maximum charging current in uA.
-- ti,termination-current: integer, charge will be terminated when current in
-    constant-voltage phase drops below this value (in uA).
-
-Optional properties:
-- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin.
-    This pin is not available on all devices however it should be used if
-    possible as this is the recommended way to obtain the charger's input PG
-    state. If this pin is not specified a software-based approach for PG
-    detection is used.
-- ti,current-limit: The maximum current to be drawn from the charger's input
-    (in uA). If this property is not specified, the input limit current is
-    set automatically using USB D+/D- signal based charger type detection.
-    If the hardware does not support the D+/D- based detection, a default
-    of 500,000 is used (=500mA) instead.
-- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If
-    not specified a default of 6,5000,000 (=6.5V) is used.
-- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic
-    power path management (in uV). If not specified a default of 4,360,000
-    (=4.36V) is used.
-
-Example:
-
-bq24257 {
-	compatible = "ti,bq24257";
-	reg = <0x6a>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-
-	pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-
-	ti,battery-regulation-voltage = <4200000>;
-	ti,charge-current = <1000000>;
-	ti,termination-current = <50000>;
-};
-
-Example:
-
-bq24250 {
-	compatible = "ti,bq24250";
-	reg = <0x6a>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-
-	ti,battery-regulation-voltage = <4200000>;
-	ti,charge-current = <500000>;
-	ti,termination-current = <50000>;
-	ti,current-limit = <900000>;
-	ti,ovp-voltage = <9500000>;
-	ti,in-dpm-voltage = <4440000>;
-};
diff --git a/dts/Bindings/power/supply/bq24257.yaml b/dts/Bindings/power/supply/bq24257.yaml
new file mode 100644
index 0000000000..3a0f6cd901
--- /dev/null
+++ b/dts/Bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq24257.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24250
+      - ti,bq24251
+      - ti,bq24257
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in uV
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in uA
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  pg-gpios:
+    description: |
+      GPIO used for connecting the bq2425x device PG (Power Good) pin.
+      This pin is not available on all devices however it should be used if
+      possible as this is the recommended way to obtain the charger's input PG
+      state. If this pin is not specified a software-based approach for PG
+      detection is used.
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The maximum current to be drawn from the charger's input (in uA).
+      If this property is not specified, the input limit current is set
+      automatically using USB D+/D- signal based charger type detection.
+      If the hardware does not support the D+/D- based detection, a default
+      of 500,000 is used (=500mA) instead.
+
+  ti,ovp-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the over voltage protection voltage (in uV).
+      If not specified a default of 6,5000,000 (=6.5V) is used.
+
+  ti,in-dpm-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the threshold input voltage for the dynamic power path management (in uV).
+      If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24257";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+      };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24250";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <500000>;
+        ti,termination-current = <50000>;
+        ti,current-limit = <900000>;
+        ti,ovp-voltage = <9500000>;
+        ti,in-dpm-voltage = <4440000>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/bq24735.yaml b/dts/Bindings/power/supply/bq24735.yaml
new file mode 100644
index 0000000000..131be6782c
--- /dev/null
+++ b/dts/Bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq24735
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: AC adapter plug event interrupt
+    maxItems: 1
+
+  ti,ac-detect-gpios:
+    maxItems: 1
+    description: |
+      This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+      that is configured as an input and connected to the ACOK pin on the bq24735.
+      Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+      absence despite ACOK being active (high) on AC adapter presence.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging current.
+      This value must be between 128mA and 8.128A with a 64mA step resolution.
+      The POR value is 0x0000h. This number is in mA (e.g. 8192).
+      See spec for more information about the ChargeCurrent (0x14h) register.
+
+  ti,charge-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging voltage.
+      This value must be between 1.024V and 19.2V with a 16mV step resolution.
+      The POR value is 0x0000h. This number is in mV (e.g. 19200).
+      See spec for more information about the ChargeVoltage (0x15h) register.
+
+  ti,input-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charger input current.
+      This value must be between 128mA and 8.064A with a 128mA step resolution.
+      The POR value is 0x1000h. This number is in mA (e.g. 8064).
+      See the spec for more information about the InputCurrent (0x3fh) register.
+
+  ti,external-control:
+    type: boolean
+    description: |
+      Indicates that the charger is configured externally and that the host should not
+      attempt to enable/disable charging or set the charge voltage/current.
+
+  poll-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@9 {
+        compatible = "ti,bq24735";
+        reg = <0x9>;
+        ti,ac-detect-gpios = <&gpio 72 0x1>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/bq256xx.yaml b/dts/Bindings/power/supply/bq256xx.yaml
index 18b54783e1..92ec7ed256 100644
--- a/dts/Bindings/power/supply/bq256xx.yaml
+++ b/dts/Bindings/power/supply/bq256xx.yaml
@@ -39,7 +39,6 @@ properties:
     maxItems: 1
 
   ti,watchdog-timeout-ms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0
     description: |
       Watchdog timer in ms. 0 (default) disables the watchdog
diff --git a/dts/Bindings/power/supply/bq25890.txt b/dts/Bindings/power/supply/bq25890.txt
deleted file mode 100644
index 805040c6ff..0000000000
--- a/dts/Bindings/power/supply/bq25890.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Binding for TI bq25890 Li-Ion Charger
-
-This driver will support the bq25892, the bq25896 and the bq25890. There are
-other ICs in the same family but those have not been tested.
-
-Required properties:
-- compatible: Should contain one of the following:
-    * "ti,bq25890"
-    * "ti,bq25892"
-    * "ti,bq25895"
-    * "ti,bq25896"
-- reg: integer, i2c address of the device.
-- interrupts: interrupt line;
-- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
-- ti,charge-current: integer, maximum charging current (in uA);
-- ti,termination-current: integer, charge will be terminated when current in
-    constant-voltage phase drops below this value (in uA);
-- ti,precharge-current: integer, maximum charge current during precharge
-    phase (in uA);
-- ti,minimum-sys-voltage: integer, when battery is charging and it is below
-    minimum system voltage, the system will be regulated above
-    minimum-sys-voltage setting (in uV);
-- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV);
-- ti,boost-max-current: integer, maximum allowed current draw in boost mode
-    (in uA).
-
-Optional properties:
-- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz,
-    otherwise 1.5MHz;
-- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
-    input current will be the lower between the resistor setting and the IINLIM
-    register setting;
-- ti,thermal-regulation-threshold: integer, temperature above which the charge
-    current is lowered, to avoid overheating (in degrees Celsius). If omitted,
-    the default setting will be used (120 degrees);
-- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with
-    the battery;
-- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due
-    to expected voltage drop on in-series resistor;
-
-Example:
-
-bq25890 {
-	compatible = "ti,bq25890";
-	reg = <0x6a>;
-
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-
-	ti,battery-regulation-voltage = <4200000>;
-	ti,charge-current = <1000000>;
-	ti,termination-current = <50000>;
-	ti,precharge-current = <128000>;
-	ti,minimum-sys-voltage = <3600000>;
-	ti,boost-voltage = <5000000>;
-	ti,boost-max-current = <1000000>;
-
-	ti,use-ilim-pin;
-	ti,thermal-regulation-threshold = <120>;
-};
diff --git a/dts/Bindings/power/supply/bq25890.yaml b/dts/Bindings/power/supply/bq25890.yaml
new file mode 100644
index 0000000000..bf823b6154
--- /dev/null
+++ b/dts/Bindings/power/supply/bq25890.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq25890.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25890
+      - ti,bq25892
+      - ti,bq25895
+      - ti,bq25896
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage (in uV)
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current (in uA)
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  ti,precharge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charge current during precharge phase (in uA)
+
+  ti,minimum-sys-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      when battery is charging and it is below minimum system voltage,
+      the system will be regulated above minimum-sys-voltage setting (in uV)
+
+  ti,boost-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: VBUS voltage level in boost mode (in uV)
+
+  ti,boost-max-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum allowed current draw in boost mode (in uA)
+
+  ti,boost-low-freq:
+    description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+    type: boolean
+
+  ti,use-ilim-pin:
+    description: |
+      ILIM resistor will be used and the input current will be the lower
+      between the resistor setting and the IINLIM register setting
+    type: boolean
+
+  ti,thermal-regulation-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      temperature above which the charge current is lowered, to avoid overheating
+      (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+  ti,ibatcomp-micro-ohms:
+    description: value of a resistor in series with the battery (in Micro Ohms)
+
+  ti,ibatcomp-clamp-microvolt:
+    description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,precharge-current
+  - ti,minimum-sys-voltage
+  - ti,boost-voltage
+  - ti,boost-max-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/bq27xxx.yaml b/dts/Bindings/power/supply/bq27xxx.yaml
index 45beefccf3..6af41da3e0 100644
--- a/dts/Bindings/power/supply/bq27xxx.yaml
+++ b/dts/Bindings/power/supply/bq27xxx.yaml
@@ -52,6 +52,7 @@ properties:
       - ti,bq27z561
       - ti,bq28z610
       - ti,bq34z100
+      - ti,bq78z100
 
   reg:
     maxItems: 1
@@ -65,7 +66,7 @@ properties:
        - charge-full-design-microamp-hours
        - voltage-min-design-microvolt
        Both or neither of the *-full-design-*-hours properties must be set.
-       See Documentation/devicetree/bindings/power/supply/battery.txt
+       See Documentation/devicetree/bindings/power/supply/battery.yaml
 
   power-supplies: true
 
diff --git a/dts/Bindings/power/supply/cpcap-battery.txt b/dts/Bindings/power/supply/cpcap-battery.txt
deleted file mode 100644
index a04efa22da..0000000000
--- a/dts/Bindings/power/supply/cpcap-battery.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Motorola CPCAP PMIC battery driver binding
-
-Required properties:
-- compatible: Shall be "motorola,cpcap-battery"
-- interrupts: Interrupt specifier for each name in interrupt-names
-- interrupt-names: Should contain the following entries:
-		   "lowbph", "lowbpl", "chrgcurr1", "battdetb"
-- io-channels: IIO ADC channel specifier for each name in io-channel-names
-- io-channel-names: Should contain the following entries:
-		    "battdetb", "battp", "chg_isense", "batti"
-- power-supplies: List of phandles for power-supplying devices, as
-		  described in power_supply.txt. Typically a reference
-		  to cpcap_charger.
-
-Example:
-
-cpcap_battery: battery {
-	compatible = "motorola,cpcap-battery";
-	interrupts-extended = <
-		&cpcap 5 0 &cpcap 3 0
-		&cpcap 20 0 &cpcap 54 0
-	>;
-	interrupt-names =
-		"lowbph", "lowbpl",
-		"chrgcurr1", "battdetb";
-	io-channels = <&cpcap_adc 0 &cpcap_adc 1
-		       &cpcap_adc 5 &cpcap_adc 6>;
-	io-channel-names = "battdetb", "battp",
-			   "chg_isense", "batti";
-	power-supplies = <&cpcap_charger>;
-};
diff --git a/dts/Bindings/power/supply/cpcap-battery.yaml b/dts/Bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 0000000000..7153fd4ce5
--- /dev/null
+++ b/dts/Bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery fuel gauge
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,cpcap-battery
+
+  interrupts:
+    items:
+      - description: eol interrupt
+      - description: low battery percentage interrupt
+      - description: critical battery percentage interrupt
+      - description: charger detect interrupt
+      - description: battery detect interrupt
+      - description: coulomb counter calibration interrupt
+
+  interrupt-names:
+    items:
+      - const: eol
+      - const: lowbph
+      - const: lowbpl
+      - const: chrgcurr1
+      - const: battdetb
+      - const: cccal
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: chg_isense
+      - const: batti
+
+  power-supplies: true
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - power-supplies
+
+additionalProperties: false
+
+examples:
+  - |
+    cpcap {
+      battery {
+        compatible = "motorola,cpcap-battery";
+        interrupts-extended =
+                <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+                <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+        interrupt-names =
+                "eol", "lowbph", "lowbpl",
+                "chrgcurr1", "battdetb", "cccal";
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 5>, <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "chg_isense", "batti";
+        power-supplies = <&cpcap_charger>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/cpcap-charger.txt b/dts/Bindings/power/supply/cpcap-charger.txt
deleted file mode 100644
index 6048f63678..0000000000
--- a/dts/Bindings/power/supply/cpcap-charger.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Motorola CPCAP PMIC battery charger binding
-
-Required properties:
-- compatible: Shall be "motorola,mapphone-cpcap-charger"
-- interrupts: Interrupt specifier for each name in interrupt-names
-- interrupt-names: Should contain the following entries:
-		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		   "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		   "battdetb"
-- io-channels: IIO ADC channel specifier for each name in io-channel-names
-- io-channel-names: Should contain the following entries:
-		    "battdetb", "battp", "vbus", "chg_isense", "batti"
-
-Optional properties:
-- mode-gpios: Optionally CPCAP charger can have a companion wireless
-	      charge controller that is controlled with two GPIOs
-	      that are active low.
-
-Example:
-
-cpcap_charger: charger {
-	compatible = "motorola,mapphone-cpcap-charger";
-	interrupts-extended = <
-		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-		&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
-		&cpcap 54 0
-	>;
-	interrupt-names =
-		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		"battdetb";
-	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
-		      &gpio3 23 GPIO_ACTIVE_LOW>;
-	io-channels = <&cpcap_adc 0 &cpcap_adc 1
-		       &cpcap_adc 2 &cpcap_adc 5
-		       &cpcap_adc 6>;
-	io-channel-names = "battdetb", "battp",
-			   "vbus", "chg_isense",
-			   "batti";
-};
diff --git a/dts/Bindings/power/supply/cpcap-charger.yaml b/dts/Bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 0000000000..cb6353683d
--- /dev/null
+++ b/dts/Bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery charger
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,mapphone-cpcap-charger
+
+  interrupts:
+    items:
+      - description: charger detection interrupt
+      - description: reverse charge interrupt
+      - description: SE1 charger detection interrupt
+      - description: SE0 charger detection interrupt
+      - description: reverse mode interrupt
+      - description: charge current 2 interrupt
+      - description: charge current 1 interrupt
+      - description: VBUS valid interrupt
+      - description: battery detect interrupt
+
+  interrupt-names:
+    items:
+      - const: chrg_det
+      - const: rvrs_chrg
+      - const: chrg_se1b
+      - const: se0conn
+      - const: rvrs_mode
+      - const: chrgcurr2
+      - const: chrgcurr1
+      - const: vbusvld
+      - const: battdetb
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: VBUS voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: vbus
+      - const: chg_isense
+      - const: batti
+
+  mode-gpios:
+    description: |
+      Optionally CPCAP charger can have a companion wireless
+      charge controller that is controlled with two GPIOs
+      that are active low.
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    cpcap {
+      charger {
+        compatible = "motorola,mapphone-cpcap-charger";
+        interrupts-extended =
+                <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+                <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+                <&cpcap 54 0>;
+        interrupt-names =
+                "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+                "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+                "battdetb";
+        mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+                     <&gpio3 23 GPIO_ACTIVE_LOW>;
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 2>, <&cpcap_adc 5>,
+                      <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "vbus", "chg_isense",
+                           "batti";
+      };
+    };
diff --git a/dts/Bindings/power/supply/cw2015_battery.yaml b/dts/Bindings/power/supply/cw2015_battery.yaml
index 5fcdf58015..c73abb2ff5 100644
--- a/dts/Bindings/power/supply/cw2015_battery.yaml
+++ b/dts/Bindings/power/supply/cw2015_battery.yaml
@@ -61,7 +61,7 @@ examples:
         #size-cells = <0>;
 
         cw2015@62 {
-            compatible = "cellwise,cw201x";
+            compatible = "cellwise,cw2015";
             reg = <0x62>;
             cellwise,battery-profile = /bits/ 8 <
                 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
diff --git a/dts/Bindings/power/supply/da9150-charger.txt b/dts/Bindings/power/supply/da9150-charger.txt
deleted file mode 100644
index f3906663c4..0000000000
--- a/dts/Bindings/power/supply/da9150-charger.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Dialog Semiconductor DA9150 Charger Power Supply bindings
-
-Required properties:
-- compatible: "dlg,da9150-charger" for DA9150 Charger Power Supply
-
-Optional properties:
-- io-channels: List of phandle and IIO specifier pairs
-- io-channel-names: List of channel names used by charger
-      ["CHAN_IBUS", "CHAN_VBUS", "CHAN_TJUNC", "CHAN_VBAT"]
-  (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info)
-
-
-Example:
-
-	da9150-charger {
-		compatible = "dlg,da9150-charger";
-
-		io-channels = <&gpadc 0>,
-			      <&gpadc 2>,
-			      <&gpadc 8>,
-			      <&gpadc 5>;
-		io-channel-names = "CHAN_IBUS",
-				   "CHAN_VBUS",
-				   "CHAN_TJUNC",
-				   "CHAN_VBAT";
-	};
diff --git a/dts/Bindings/power/supply/da9150-fg.txt b/dts/Bindings/power/supply/da9150-fg.txt
deleted file mode 100644
index 00236fe3ea..0000000000
--- a/dts/Bindings/power/supply/da9150-fg.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
-
-Required properties:
-- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply
-
-Optional properties:
-- dlg,update-interval: Interval time (milliseconds) between battery level checks.
-- dlg,warn-soc-level: Battery discharge level (%) where warning event raised.
-      [1 - 100]
-- dlg,crit-soc-level: Battery discharge level (%) where critical event raised.
-  This value should be lower than the warning level.
-      [1 - 100]
-
-
-Example:
-
-	fuel-gauge {
-		compatible = "dlg,da9150-fuel-gauge";
-
-		dlg,update-interval = <10000>;
-		dlg,warn-soc-level = /bits/ 8 <15>;
-		dlg,crit-soc-level = /bits/ 8 <5>;
-	};
diff --git a/dts/Bindings/power/supply/dlg,da9150-charger.yaml b/dts/Bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 0000000000..96336b05d7
--- /dev/null
+++ b/dts/Bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Dialog Semiconductor DA9150 Charger Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-charger
+
+  io-channels:
+    items:
+      - description: ADC channel for current
+      - description: ADC channel for bus voltage
+      - description: ADC channel for junction temperature
+      - description: ADC channel for battery voltage
+
+  io-channel-names:
+    items:
+      - const: CHAN_IBUS
+      - const: CHAN_VBUS
+      - const: CHAN_TJUNC
+      - const: CHAN_VBAT
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "dlg,da9150-charger";
+        io-channels = <&gpadc 0>,
+                      <&gpadc 2>,
+                      <&gpadc 8>,
+                      <&gpadc 5>;
+        io-channel-names = "CHAN_IBUS",
+                           "CHAN_VBUS",
+                           "CHAN_TJUNC",
+                           "CHAN_VBAT";
+      };
+    };
diff --git a/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 0000000000..30c2fff7cf
--- /dev/null
+++ b/dts/Bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-fuel-gauge
+
+  dlg,update-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Interval time (milliseconds) between battery level checks.
+
+  dlg,warn-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: Battery discharge level (%) where warning event raised.
+
+  dlg,crit-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: |
+      Battery discharge level (%) where critical event raised.
+      This value should be lower than the warning level.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      battery {
+        compatible = "dlg,da9150-fuel-gauge";
+        dlg,update-interval = <10000>;
+        dlg,warn-soc-level = /bits/ 8 <15>;
+        dlg,crit-soc-level = /bits/ 8 <5>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/isp1704.txt b/dts/Bindings/power/supply/isp1704.txt
deleted file mode 100644
index fa35969079..0000000000
--- a/dts/Bindings/power/supply/isp1704.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Binding for NXP ISP1704 USB Charger Detection
-
-Required properties:
-- compatible: Should contain one of the following:
- * "nxp,isp1704"
-- nxp,enable-gpio: Should contain a phandle + gpio-specifier
-  to the GPIO pin connected to the chip's enable pin.
-- usb-phy: Should contain a phandle to the USB PHY
-  the ISP1704 is connected to.
-
-Example:
-
-isp1704 {
-	compatible = "nxp,isp1704";
-	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
-	usb-phy = <&usb2_phy>;
-};
diff --git a/dts/Bindings/power/supply/isp1704.yaml b/dts/Bindings/power/supply/isp1704.yaml
new file mode 100644
index 0000000000..4c91da7001
--- /dev/null
+++ b/dts/Bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/isp1704.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for NXP ISP1704 USB Charger Detection
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nxp,isp1704
+
+  nxp,enable-gpio:
+    maxItems: 1
+    description: GPIO connected to the chip's enable pin
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: USB PHY the ISP1704 is connected to
+
+required:
+  - compatible
+  - nxp,enable-gpio
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger-detect {
+      compatible = "nxp,isp1704";
+      nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+      usb-phy = <&usb2_phy>;
+    };
diff --git a/dts/Bindings/power/supply/lego,ev3-battery.yaml b/dts/Bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 0000000000..518eabb635
--- /dev/null
+++ b/dts/Bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+  It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+  detected by a key switch in the battery compartment.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: lego,ev3-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for battery voltage
+      - description: ADC channel for battery current
+
+  io-channel-names:
+    items:
+      - const: voltage
+      - const: current
+
+  rechargeable-gpios:
+    maxItems: 1
+    description: Rechargeable battery indication gpio
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    battery {
+      compatible = "lego,ev3-battery";
+      io-channels = <&adc 4>, <&adc 3>;
+      io-channel-names = "voltage", "current";
+      rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+    };
diff --git a/dts/Bindings/power/supply/lego_ev3_battery.txt b/dts/Bindings/power/supply/lego_ev3_battery.txt
deleted file mode 100644
index 5485633b1f..0000000000
--- a/dts/Bindings/power/supply/lego_ev3_battery.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-LEGO MINDSTORMS EV3 Battery
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
-It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
-detected by a key switch in the battery compartment.
-
-Required properties:
- - compatible: Must be "lego,ev3-battery"
- - io-channels: phandles to analog inputs for reading voltage and current
- - io-channel-names: Must be "voltage", "current"
- - rechargeable-gpios: phandle to the rechargeable battery indication gpio
-
-Example:
-
-	battery {
-		compatible = "lego,ev3-battery";
-		io-channels = <&adc 4>, <&adc 3>;
-		io-channel-names = "voltage", "current";
-		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
-	};
diff --git a/dts/Bindings/power/supply/lltc,lt3651-charger.yaml b/dts/Bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 0000000000..e2d8d2aebb
--- /dev/null
+++ b/dts/Bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analog Devices LT3651 Charger Power Supply bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,lt3651-charger
+      - lltc,ltc3651-charger  # deprecated, use lltc,lt3651-charger
+
+  lltc,acpr-gpios:
+    maxItems: 1
+
+  lltc,fault-gpios:
+    maxItems: 1
+
+  lltc,chrg-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "lltc,lt3651-charger";
+      lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+      lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+      lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+    };
diff --git a/dts/Bindings/power/supply/lltc,ltc294x.yaml b/dts/Bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 0000000000..043bf37804
--- /dev/null
+++ b/dts/Bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+  All chips measure battery capacity.
+  The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+  temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+  are software compatible, uses a slightly different conversion formula
+  for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2941
+      - lltc,ltc2942
+      - lltc,ltc2943
+      - lltc,ltc2944
+
+  reg:
+    maxItems: 1
+
+  lltc,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: |
+      Sense resistor value in milli-ohms.
+      Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+  lltc,prescaler-exponent:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The prescaler exponent as explained in the datasheet.
+      This determines the range and accuracy of the gauge.
+      The value is programmed into the chip only if it differs from the current setting.
+      The setting is lost when the battery is disconnected.
+
+required:
+  - compatible
+  - reg
+  - lltc,resistor-sense
+  - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      battery@64 {
+        compatible = "lltc,ltc2943";
+        reg = <0x64>;
+        lltc,resistor-sense = <15>;
+        lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+      };
+    };
diff --git a/dts/Bindings/power/supply/lp8727_charger.txt b/dts/Bindings/power/supply/lp8727_charger.txt
deleted file mode 100644
index 0355a4b68f..0000000000
--- a/dts/Bindings/power/supply/lp8727_charger.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Binding for TI/National Semiconductor LP8727 Charger
-
-Required properties:
-- compatible: "ti,lp8727"
-- reg: I2C slave address 27h
-
-Optional properties:
-- interrupts: interrupt specifier (see interrupt binding[0])
-- debounce-ms: interrupt debounce time. (u32)
-
-AC and USB charging parameters
-- charger-type: "ac" or "usb" (string)
-- eoc-level: value of 'enum lp8727_eoc_level' (u8)
-- charging-current: value of 'enum lp8727_ichg' (u8)
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example)
-
-lp8727@27 {
-	compatible = "ti,lp8727";
-	reg = <0x27>;
-
-	/* GPIO 134 is used for LP8728 interrupt pin */
-	interrupt-parent = <&gpio5>; 	/* base = 128 */
-	interrupts = <6 0x2>;		/* offset = 6, falling edge type */
-
-	debounce-ms = <300>;
-
-	/* AC charger: 5% EOC and 500mA charging current */
-	ac {
-		charger-type = "ac";
-		eoc-level = /bits/ 8 <0>;
-		charging-current = /bits/ 8 <4>;
-	};
-
-	/* USB charger: 10% EOC and 400mA charging current */
-	usb {
-		charger-type = "usb";
-		eoc-level = /bits/ 8 <1>;
-		charging-current = /bits/ 8 <2>;
-	};
-};
diff --git a/dts/Bindings/power/supply/lt3651-charger.txt b/dts/Bindings/power/supply/lt3651-charger.txt
deleted file mode 100644
index 40811ff8de..0000000000
--- a/dts/Bindings/power/supply/lt3651-charger.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Analog Devices LT3651 Charger Power Supply bindings: lt3651-charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "lltc,ltc3651-charger", (DEPRECATED: Use "lltc,lt3651-charger")
- * "lltc,lt3651-charger"
- - lltc,acpr-gpios: Connect to ACPR output. See remark below.
-
-Optional properties:
- - lltc,fault-gpios: Connect to FAULT output. See remark below.
- - lltc,chrg-gpios: Connect to CHRG output. See remark below.
-
-The lt3651 outputs are open-drain type and active low. The driver assumes the
-GPIO reports "active" when the output is asserted, so if the pins have been
-connected directly, the GPIO flags should be set to active low also.
-
-The driver will attempt to aquire interrupts for all GPIOs to detect changes in
-line state. If the system is not capabale of providing interrupts, the driver
-cannot report changes and userspace will need to periodically read the sysfs
-attributes to detect changes.
-
-Example:
-
-	charger: battery-charger {
-		compatible = "lltc,lt3651-charger";
-		lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
-		lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
-		lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
-	};
diff --git a/dts/Bindings/power/supply/ltc2941.txt b/dts/Bindings/power/supply/ltc2941.txt
deleted file mode 100644
index 3b9ba147b0..0000000000
--- a/dts/Bindings/power/supply/ltc2941.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges
-
-All chips measure battery capacity.
-The LTC2942 is pin compatible with the LTC2941, it adds voltage and
-temperature monitoring, and is runtime detected. LTC2943 and LTC2944
-is software compatible, uses a slightly different conversion formula
-for the charge counter and adds voltage, current and temperature monitoring.
-
-Required properties:
-- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943"
-    or "lltc,ltc2944" which also indicates the type of I2C chip attached.
-- reg: The 7-bit I2C address.
-- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
-    negative value when the battery has been connected to the wrong end of the
-    resistor.
-- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
-    This determines the range and accuracy of the gauge. The value is programmed
-    into the chip only if it differs from the current setting. The setting is
-    lost when the battery is disconnected.
-
-Example from the Topic Miami Florida board:
-
-	fuelgauge: ltc2943@64 {
-		compatible = "lltc,ltc2943";
-		reg = <0x64>;
-		lltc,resistor-sense = <15>;
-		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
-	};
diff --git a/dts/Bindings/power/supply/ltc4162-l.yaml b/dts/Bindings/power/supply/ltc4162-l.yaml
index 1f88c9e013..6d7aa97a64 100644
--- a/dts/Bindings/power/supply/ltc4162-l.yaml
+++ b/dts/Bindings/power/supply/ltc4162-l.yaml
@@ -29,12 +29,10 @@ properties:
     description: I2C address of the charger.
 
   lltc,rsnsb-micro-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Battery sense resistor in microohm.
     minimum: 1000
 
   lltc,rsnsi-micro-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Input current sense resistor in microohm.
     minimum: 1000
 
diff --git a/dts/Bindings/power/supply/max17040_battery.txt b/dts/Bindings/power/supply/max17040_battery.txt
deleted file mode 100644
index c802f664b5..0000000000
--- a/dts/Bindings/power/supply/max17040_battery.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-max17040_battery
-~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043",
-		"maxim,max17044", "maxim,max17048", "maxim,max17049",
-		"maxim,max17058", "maxim,max17059" or "maxim,max77836-battery"
- - reg: i2c slave address
-
-Optional properties :
-- maxim,alert-low-soc-level :	The alert threshold that sets the state of
-				charge level (%) where an interrupt is
-				generated. Can be configured from 1 up to 32
-				(%). If skipped the power up default value of
-				4 (%) will be used.
-- maxim,double-soc : 		Certain devices return double the capacity.
-				Specify this boolean property to divide the
-				reported value in 2 and thus normalize it.
-				SOC == State of Charge == Capacity.
-- maxim,rcomp :			A value to compensate readings for various
-				battery chemistries and operating temperatures.
-				max17040,41 have 2 byte rcomp, default to
-				0x97 0x00. All other devices have one byte
-				rcomp, default to 0x97.
-- interrupts : 			Interrupt line see Documentation/devicetree/
-				bindings/interrupt-controller/interrupts.txt
-- wakeup-source :		This device has wakeup capabilities. Use this
-				property to use alert low SOC level interrupt
-				as wake up source.
-
-Optional properties support interrupt functionality for alert low state of
-charge level, present in some ICs in the same family, and should be used with
-compatible "maxim,max77836-battery".
-
-Example:
-
-	battery-fuel-gauge@36 {
-		compatible = "maxim,max77836-battery";
-		reg = <0x36>;
-		maxim,alert-low-soc-level = <10>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-
-	battery-fuel-gauge@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-		maxim,rcomp = /bits/ 8 <0x56>;
-		maxim,alert-low-soc-level = <10>;
-		maxim,double-soc;
-	};
diff --git a/dts/Bindings/power/supply/max17042_battery.txt b/dts/Bindings/power/supply/max17042_battery.txt
deleted file mode 100644
index f34c5daae9..0000000000
--- a/dts/Bindings/power/supply/max17042_battery.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-max17042_battery
-~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : one of the following
- * "maxim,max17042"
- * "maxim,max17047"
- * "maxim,max17050"
- * "maxim,max17055"
-
-Optional properties :
- - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
-                         (datasheet-recommended value is 10000).
-   Defining this property enables current-sense functionality.
-
-Optional threshold properties :
- If skipped the condition won't be reported.
- - maxim,cold-temp :      Temperature threshold to report battery
-                          as cold (in tenths of degree Celsius).
- - maxim,over-heat-temp : Temperature threshold to report battery
-                          as over heated (in tenths of degree Celsius).
- - maxim,dead-volt :      Voltage threshold to report battery
-                          as dead (in mV).
- - maxim,over-volt :      Voltage threshold to report battery
-                          as over voltage (in mV).
-
-Example:
-
-	battery-charger@36 {
-		compatible = "maxim,max17042";
-		reg = <0x36>;
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4300>;
-	};
diff --git a/dts/Bindings/power/supply/max8903-charger.txt b/dts/Bindings/power/supply/max8903-charger.txt
deleted file mode 100644
index bab947fef0..0000000000
--- a/dts/Bindings/power/supply/max8903-charger.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Maxim Semiconductor MAX8903 Battery Charger bindings
-
-Required properties:
-- compatible: "maxim,max8903" for MAX8903 Battery Charger
-- dok-gpios: Valid DC power has been detected (active low, input), optional if uok-gpios is provided
-- uok-gpios: Valid USB power has been detected (active low, input), optional if dok-gpios is provided
-
-Optional properties:
-- cen-gpios: Charge enable pin (active low, output)
-- chg-gpios: Charger status pin (active low, input)
-- flt-gpios: Fault pin (active low, output)
-- dcm-gpios: Current limit mode setting (DC=1 or USB=0, output)
-- usus-gpios: USB suspend pin (active high, output)
-
-
-Example:
-
-	max8903-charger {
-		compatible = "maxim,max8903";
-		dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-		flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-		cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-	};
diff --git a/dts/Bindings/power/supply/maxim,ds2760.txt b/dts/Bindings/power/supply/maxim,ds2760.txt
deleted file mode 100644
index 55967a0bee..0000000000
--- a/dts/Bindings/power/supply/maxim,ds2760.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Devicetree bindings for Maxim DS2760
-====================================
-
-The ds2760 is a w1 slave device and must hence have its sub-node in DT
-under a w1 bus master node.
-
-The device exposes a power supply, so the details described in
-Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
-
-Required properties:
-- compatible: must be "maxim,ds2760"
-
-Optional properties:
-- power-supplies:	Refers to one or more power supplies connected to
-			this battery.
-- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter
-			sleep mode when the DQ line goes low for greater
-			than 2 seconds and leave sleep Mode when the DQ
-			line goes high.
-- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When
-			this time expires, the values are read again from
-			the hardware. Defaults to 1000.
-- rated-capacity-microamp-hours:
-			The rated capacity of the battery, in mAh.
-			If not specified, the value stored in the
-			non-volatile chip memory is used.
diff --git a/dts/Bindings/power/supply/maxim,ds2760.yaml b/dts/Bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 0000000000..818647edf6
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim DS2760 DT bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The ds2760 is a w1 slave device and must hence have its sub-node in
+  DT under a w1 bus master node.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,ds2760
+
+  maxim,pmod-enabled:
+    description: |
+      Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+      and leave sleep Mode when the DQ line goes high.
+    type: boolean
+
+  maxim,cache-time-ms:
+    description: |
+      Time im milliseconds to cache the data for.
+      When this time expires, the values are read again from the hardware.
+      Defaults to 1000.
+
+  rated-capacity-microamp-hours:
+    description: |
+      The rated capacity of the battery, in mAh.
+      If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/dts/Bindings/power/supply/maxim,max14656.txt b/dts/Bindings/power/supply/maxim,max14656.txt
deleted file mode 100644
index f956247d49..0000000000
--- a/dts/Bindings/power/supply/maxim,max14656.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Maxim MAX14656 / AL32 USB Charger Detector
-
-Required properties :
-- compatible : "maxim,max14656";
-- reg: i2c slave address
-- interrupts: interrupt line
-
-Example:
-
-&i2c2 {
-	clock-frequency = <50000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-
-	max14656@35 {
-		compatible = "maxim,max14656";
-		reg = <0x35>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_charger_detect>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/dts/Bindings/power/supply/maxim,max14656.yaml b/dts/Bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 0000000000..0a41078ebd
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim MAX14656 DT bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max14656
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger-detector@35 {
+        compatible = "maxim,max14656";
+        reg = <0x35>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/maxim,max17040.yaml b/dts/Bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 0000000000..de91cf3f05
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17040
+      - maxim,max17041
+      - maxim,max17043
+      - maxim,max17044
+      - maxim,max17048
+      - maxim,max17049
+      - maxim,max17058
+      - maxim,max17059
+      - maxim,max77836-battery
+
+  reg:
+    maxItems: 1
+
+  maxim,alert-low-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description: |
+      The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+      If skipped the power up default value of 4 (%) will be used.
+
+  maxim,double-soc:
+    type: boolean
+    description: |
+      Certain devices return double the capacity.
+      Specify this to divide the reported value in 2 and thus normalize it.
+      SoC == State of Charge == Capacity.
+
+  maxim,rcomp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A value to compensate readings for various battery chemistries and operating temperatures.
+      max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+      All other devices have one byte rcomp, default to 0x97.
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: |
+      Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17048";
+        reg = <0x36>;
+        maxim,rcomp = /bits/ 8 <0x56>;
+        maxim,alert-low-soc-level = <10>;
+        maxim,double-soc;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max77836-battery";
+        reg = <0x36>;
+        maxim,alert-low-soc-level = <10>;
+        interrupt-parent = <&gpio7>;
+        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+        wakeup-source;
+      };
+    };
diff --git a/dts/Bindings/power/supply/maxim,max17042.yaml b/dts/Bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 0000000000..c70f05ea6d
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17042
+      - maxim,max17047
+      - maxim,max17050
+      - maxim,max17055
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  maxim,rsns-microohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+      Defining this property enables current-sense functionality.
+
+  maxim,cold-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as cold (in tenths of degree Celsius).
+      Default is not to report cold events.
+
+  maxim,over-heat-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+      Default is not to report over heating events.
+
+  maxim,dead-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as dead (in mV).
+      Default is not to report dead battery events.
+
+  maxim,over-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as over voltage (in mV).
+      Default is not to report over-voltage events.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17042";
+        reg = <0x36>;
+        maxim,rsns-microohm = <10000>;
+        maxim,over-heat-temp = <600>;
+        maxim,over-volt = <4300>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/maxim,max8903.yaml b/dts/Bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 0000000000..4828ca0842
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8903
+
+  dok-gpios:
+    maxItems: 1
+    description: Valid DC power has been detected (active low, input)
+
+  uok-gpios:
+    maxItems: 1
+    description: Valid USB power has been detected (active low, input)
+
+  cen-gpios:
+    maxItems: 1
+    description: Charge enable pin (active low, output)
+
+  chg-gpios:
+    maxItems: 1
+    description: Charger status pin (active low, input)
+
+  flt-gpios:
+    maxItems: 1
+    description: Fault pin (active low, output)
+
+  dcm-gpios:
+    maxItems: 1
+    description: Current limit mode setting (DC=1 or USB=0, output)
+
+  usus-gpios:
+    maxItems: 1
+    description: USB suspend pin (active high, output)
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dok-gpios
+  - required:
+      - uok-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "maxim,max8903";
+      dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+      flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+      chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+      cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+    };
diff --git a/dts/Bindings/power/supply/microchip,ucs1002.txt b/dts/Bindings/power/supply/microchip,ucs1002.txt
deleted file mode 100644
index 1d284ad816..0000000000
--- a/dts/Bindings/power/supply/microchip,ucs1002.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Microchip UCS1002 USB Port Power Controller
-
-Required properties:
-- compatible		: Should be "microchip,ucs1002";
-- reg			: I2C slave address
-
-Optional properties:
-- interrupts		: A list of interrupts lines present (could be either
-			  corresponding to A_DET# pin, ALERT# pin, or both)
-- interrupt-names	: A list of interrupt names. Should contain (if
-			  present):
-			  - "a_det" for line connected to A_DET# pin
-			  - "alert" for line connected to ALERT# pin
-			  Both are expected to be IRQ_TYPE_EDGE_BOTH
-Example:
-
-&i2c3 {
-	charger@32 {
-		compatible = "microchip,ucs1002";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ucs1002_pins>;
-		reg = <0x32>;
-		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
-				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
-		interrupt-names = "a_det", "alert";
-	};
-};
diff --git a/dts/Bindings/power/supply/microchip,ucs1002.yaml b/dts/Bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 0000000000..b9bd1591ed
--- /dev/null
+++ b/dts/Bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: microchip,ucs1002
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: a_det
+          - const: alert
+      - const: a_det
+      - const: alert
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@32 {
+            compatible = "microchip,ucs1002";
+            reg = <0x32>;
+            interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+                                  <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "a_det", "alert";
+       };
+    };
diff --git a/dts/Bindings/power/supply/nokia,n900-battery.yaml b/dts/Bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 0000000000..4a1489f2b2
--- /dev/null
+++ b/dts/Bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Nokia N900 battery
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nokia,n900-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for temperature reading
+      - description: ADC channel for battery size identification
+      - description: ADC channel to measure the battery voltage
+
+  io-channel-names:
+    items:
+      - const: temp
+      - const: bsi
+      - const: vbat
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    battery {
+      compatible = "nokia,n900-battery";
+      io-channels = <&twl4030_madc 0>,
+                    <&twl4030_madc 4>,
+                    <&twl4030_madc 12>;
+      io-channel-names = "temp",
+                         "bsi",
+                         "vbat";
+    };
diff --git a/dts/Bindings/power/supply/olpc-battery.yaml b/dts/Bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 0000000000..0bd7bf3b8e
--- /dev/null
+++ b/dts/Bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/olpc-battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: OLPC Battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: olpc,xo1.5-battery
+          - const: olpc,xo1-battery
+      - items:
+          - const: olpc,xo1-battery
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/dts/Bindings/power/supply/olpc_battery.txt b/dts/Bindings/power/supply/olpc_battery.txt
deleted file mode 100644
index 8d87d6b35a..0000000000
--- a/dts/Bindings/power/supply/olpc_battery.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-OLPC battery
-~~~~~~~~~~~~
-
-Required properties:
-  - compatible : "olpc,xo1-battery" or "olpc,xo1.5-battery"
diff --git a/dts/Bindings/power/supply/power-supply.yaml b/dts/Bindings/power/supply/power-supply.yaml
index c5c55f6272..2597601677 100644
--- a/dts/Bindings/power/supply/power-supply.yaml
+++ b/dts/Bindings/power/supply/power-supply.yaml
@@ -18,25 +18,3 @@ properties:
 
 additionalProperties: true
 
-examples:
-  - |
-    power {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      usb_charger:charger@e {
-        compatible = "some,usb-charger";
-        reg = <0xe>;
-      };
-
-      ac_charger:charger@c {
-        compatible = "some,ac-charger";
-        reg = <0xc>;
-      };
-
-      battery:battery@b {
-        compatible = "some,battery";
-        reg = <0xb>;
-        power-supplies = <&usb_charger>, <&ac_charger>;
-      };
-    };
diff --git a/dts/Bindings/power/supply/power_supply.txt b/dts/Bindings/power/supply/power_supply.txt
deleted file mode 100644
index d9693e0545..0000000000
--- a/dts/Bindings/power/supply/power_supply.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-This binding has been converted to yaml please see power-supply.yaml in this
-directory.
diff --git a/dts/Bindings/power/supply/qcom,coincell-charger.txt b/dts/Bindings/power/supply/qcom,coincell-charger.txt
deleted file mode 100644
index 7478992232..0000000000
--- a/dts/Bindings/power/supply/qcom,coincell-charger.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Qualcomm Coincell Charger:
-
-The hardware block controls charging for a coincell or capacitor that is
-used to provide power backup for certain features of the power management
-IC (PMIC)
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,pm8941-coincell"
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: base address of the coincell charger registers
-
-- qcom,rset-ohms:
-	Usage: required
-	Value type: <u32>
-	Definition: resistance (in ohms) for current-limiting resistor
-		must be one of: 800, 1200, 1700, 2100
-
-- qcom,vset-millivolts:
-	Usage: required
-	Value type: <u32>
-	Definition: voltage (in millivolts) to apply for charging
-		must be one of: 2500, 3000, 3100, 3200
-
-- qcom,charger-disable:
-	Usage: optional
-	Value type: <boolean>
-	Definition: defining this property disables charging
-
-This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
-as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
-../mfd/qcom-pm8xxx.txt
-
-Example:
-
-	pm8941@0 {
-		coincell@2800 {
-			compatible = "qcom,pm8941-coincell";
-			reg = <0x2800>;
-
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
diff --git a/dts/Bindings/power/supply/qcom,pm8941-charger.yaml b/dts/Bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 0000000000..bc8904872d
--- /dev/null
+++ b/dts/Bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,pm8941-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: charge done
+      - description: charge fast mode
+      - description: charge trickle mode
+      - description: battery temperature ok
+      - description: battery present
+      - description: charger disconnected
+      - description: USB-in valid
+      - description: DC-in valid
+
+  interrupt-names:
+    items:
+      - const: chg-done
+      - const: chg-fast
+      - const: chg-trkl
+      - const: bat-temp-ok
+      - const: bat-present
+      - const: chg-gone
+      - const: usb-valid
+      - const: dc-valid
+
+  qcom,fast-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+  qcom,fast-charge-low-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2100000
+    maximum: 3600000
+    description: |
+      Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+      Below this value linear or switch-mode auto-trickle-charging will operate.
+
+  qcom,fast-charge-high-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+      The fast charger will attempt to charge the battery to this voltage.
+      May be clamped to safety limits.
+
+  qcom,fast-charge-safe-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+      be clamped by this value. Defaults to 4.2V.
+
+  qcom,fast-charge-safe-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: |
+      Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+      will be clamped by this value. Defaults to 1A.
+
+  qcom,auto-recharge-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which auto-recharge functionality will restart charging
+      after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+      Defaults to 4.1V.
+
+  qcom,minimum-input-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4200000
+    maximum: 9600000
+    description: |
+      Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+  qcom,dc-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default DC charge current limit in uA. Defaults to 100mA.
+
+  qcom,disable-dc:
+    type: boolean
+    description: Disable DC charger
+
+  qcom,jeita-extended-temp-range:
+    type: boolean
+    description: |
+      Enable JEITA extended temperature range;  This does *not* adjust the maximum charge
+      voltage or current in the extended temperature range. It only allows charging when
+      the battery is in the extended temperature range. Voltage/current regulation must
+      be done externally to fully comply with the JEITA safety guidelines if this flag
+      is set.
+
+  usb-otg-in-supply:
+    description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+  otg-vbus:
+    type: object
+    description: |
+      This node defines a regulator used to control the direction of VBUS voltage.
+      Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+      or allow input voltage from external VBUS for charging. In the hardware, the supply for
+      this regulator comes from usb_otg_in-supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@1000 {
+        compatible = "qcom,pm8941-charger";
+        reg = <0x1000>;
+        interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "chg-done",
+                          "chg-fast",
+                          "chg-trkl",
+                          "bat-temp-ok",
+                          "bat-present",
+                          "chg-gone",
+                          "usb-valid",
+                          "dc-valid";
+        qcom,fast-charge-current-limit = <1000000>;
+        qcom,dc-current-limit = <1000000>;
+        usb-otg-in-supply = <&pm8941_5vs1>;
+
+        otg-vbus {};
+      };
+    };
diff --git a/dts/Bindings/power/supply/qcom,pm8941-coincell.yaml b/dts/Bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 0000000000..0450f4dd4e
--- /dev/null
+++ b/dts/Bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+  The hardware block controls charging for a coincell or capacitor that is
+  used to provide power backup for certain features of the power management
+  IC (PMIC)
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,pm8941-coincell
+
+  reg:
+    maxItems: 1
+
+  qcom,rset-ohms:
+    description: resistance (in ohms) for current-limiting resistor
+    enum: [ 800, 1200, 1700, 2100 ]
+
+  qcom,vset-millivolts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: voltage (in millivolts) to apply for charging
+    enum: [ 2500, 3000, 3100, 3200 ]
+
+  qcom,charger-disable:
+    type: boolean
+    description: defining this property disables charging
+
+required:
+  - compatible
+  - reg
+  - qcom,rset-ohms
+  - qcom,vset-millivolts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@2800 {
+        compatible = "qcom,pm8941-coincell";
+        reg = <0x2800>;
+        qcom,rset-ohms = <2100>;
+        qcom,vset-millivolts = <3000>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/qcom_smbb.txt b/dts/Bindings/power/supply/qcom_smbb.txt
deleted file mode 100644
index 06f8a5ddb6..0000000000
--- a/dts/Bindings/power/supply/qcom_smbb.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-Qualcomm Switch-Mode Battery Charger and Boost
-
-PROPERTIES
-- compatible:
-  Usage: required
-  Value type: <stringlist>
-  Description: Must be one of:
-               - "qcom,pm8941-charger"
-
-- reg:
-  Usage: required
-  Value type: <prop-encoded-array>
-  Description: Base address of registers for SMBB block
-
-- interrupts:
-  Usage: required
-  Value type: <prop-encoded-array>
-  Description: The format of the specifier is defined by the binding document
-               describing the node's interrupt parent.  Must contain one
-               specifier for each of the following interrupts, in order:
-               - charge done
-               - charge fast mode
-               - charge trickle mode
-               - battery temperature ok
-               - battery present
-               - charger disconnected
-               - USB-in valid
-               - DC-in valid
-
-- interrupt-names:
-  Usage: required
-  Value type: <stringlist>
-  Description: Must contain the following list, strictly ordered:
-               "chg-done",
-               "chg-fast",
-               "chg-trkl",
-               "bat-temp-ok",
-               "bat-present",
-               "chg-gone",
-               "usb-valid",
-               "dc-valid"
-
-- qcom,fast-charge-current-limit:
-  Usage: optional (default: 1A, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 3A]
-  Description: Maximum charge current; May be clamped to safety limits.
-
-- qcom,fast-charge-low-threshold-voltage:
-  Usage: optional (default: 3.2V, or pre-configured value)
-  Value type: <u32>; uV; range [2.1V : 3.6V]
-  Description: Battery voltage limit above which fast charging may operate;
-               Below this value linear or switch-mode auto-trickle-charging
-               will operate.
-
-- qcom,fast-charge-high-threshold-voltage:
-  Usage: optional (default: 4.2V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Battery voltage limit below which fast charging may operate;
-               The fast charger will attempt to charge the battery to this
-               voltage.  May be clamped to safety limits.
-
-- qcom,fast-charge-safe-voltage:
-  Usage: optional (default: 4.2V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Maximum safe battery voltage; May be pre-set by bootloader, in
-               which case, setting this will harmlessly fail. The property
-               'fast-charge-high-watermark' will be clamped by this value.
-
-- qcom,fast-charge-safe-current:
-  Usage: optional (default: 1A, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 3A]
-  Description: Maximum safe battery charge current; May pre-set by bootloader,
-               in which case, setting this will harmlessly fail. The property
-               'qcom,fast-charge-current-limit' will be clamped by this value.
-
-- qcom,auto-recharge-threshold-voltage:
-  Usage: optional (default: 4.1V, or pre-configured value)
-  Value type: <u32>; uV; range [3.24V : 5V]
-  Description: Battery voltage limit below which auto-recharge functionality
-               will restart charging after end-of-charge;  The high cutoff
-               limit for auto-recharge is 5% above this value.
-
-- qcom,minimum-input-voltage:
-  Usage: optional (default: 4.3V, or pre-configured value)
-  Value type: <u32>; uV; range [4.2V : 9.6V]
-  Description: Input voltage level above which charging may operate
-
-- qcom,dc-current-limit:
-  Usage: optional (default: 100mA, or pre-configured value)
-  Value type: <u32>; uA; range [100mA : 2.5A]
-  Description: Default DC charge current limit
-
-- qcom,disable-dc:
-  Usage: optional (default: false)
-  Value type: boolean: <u32> or <empty>
-  Description: Disable DC charger
-
-- qcom,jeita-extended-temp-range:
-  Usage: optional (default: false)
-  Value type: boolean: <u32> or <empty>
-  Description: Enable JEITA extended temperature range;  This does *not*
-               adjust the maximum charge voltage or current in the extended
-               temperature range.  It only allows charging when the battery
-               is in the extended temperature range.  Voltage/current
-               regulation must be done externally to fully comply with
-               the JEITA safety guidelines if this flag is set.
-
-- usb_otg_in-supply:
-  Usage: optional
-  Value type: <phandle>
-  Description: Reference to the regulator supplying power to the USB_OTG_IN
-               pin.
-
-child nodes:
-- otg-vbus:
-  Usage: optional
-  Description: This node defines a regulator used to control the direction
-               of VBUS voltage - specifically: whether to supply voltage
-               to VBUS for host mode operation of the OTG port, or allow
-               input voltage from external VBUS for charging.  In the
-               hardware, the supply for this regulator comes from
-               usb_otg_in-supply.
-
-EXAMPLE
-charger@1000 {
-       compatible = "qcom,pm8941-charger";
-       reg = <0x1000 0x700>;
-       interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-                       <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-       interrupt-names = "chg-done",
-                       "chg-fast",
-                       "chg-trkl",
-                       "bat-temp-ok",
-                       "bat-present",
-                       "chg-gone",
-                       "usb-valid",
-                       "dc-valid";
-
-       qcom,fast-charge-current-limit = <1000000>;
-       qcom,dc-charge-current-limit = <1000000>;
-       usb_otg_in-supply = <&pm8941_5vs1>;
-
-       otg-vbus {};
-};
diff --git a/dts/Bindings/power/supply/richtek,rt9455.yaml b/dts/Bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 0000000000..e1c233462f
--- /dev/null
+++ b/dts/Bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for Richtek rt9455 battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt9455
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  richtek,output-charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: output current from the charger to the battery, in uA.
+
+  richtek,end-of-charge-percentage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      percent of the output charge current. When the current in constant-voltage phase drops
+      below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+  richtek,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum battery voltage in uV.
+
+  richtek,boost-output-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+  richtek,min-input-voltage-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input voltage level in uV, used to decrease voltage level when the over current of the
+      input power source occurs. This prevents input voltage drop due to insufficient
+      current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+  richtek,avg-input-current-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input current value in uA drained by the charger from the power source.
+      Defaults to 500000 uA (500mA).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - richtek,output-charge-current
+  - richtek,end-of-charge-percentage
+  - richtek,battery-regulation-voltage
+  - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@22 {
+        compatible = "richtek,rt9455";
+        reg = <0x22>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+        richtek,output-charge-current	    = <500000>;
+        richtek,end-of-charge-percentage    = <10>;
+        richtek,battery-regulation-voltage  = <4200000>;
+        richtek,boost-output-voltage	    = <5050000>;
+
+        richtek,min-input-voltage-regulation = <4500000>;
+        richtek,avg-input-current-regulation = <500000>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/rohm,bd99954.yaml b/dts/Bindings/power/supply/rohm,bd99954.yaml
index 9852d2febf..24b06957b4 100644
--- a/dts/Bindings/power/supply/rohm,bd99954.yaml
+++ b/dts/Bindings/power/supply/rohm,bd99954.yaml
@@ -110,7 +110,7 @@ properties:
 #     multipleOf: 64000
 #     a charge cycle terminates when the battery voltage is above recharge
 #     threshold, and the current is below this setting (7 in above chart)
-#   See also Documentation/devicetree/bindings/power/supply/battery.txt
+#   See also Documentation/devicetree/bindings/power/supply/battery.yaml
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/power/supply/rt9455_charger.txt b/dts/Bindings/power/supply/rt9455_charger.txt
deleted file mode 100644
index 1e6107c757..0000000000
--- a/dts/Bindings/power/supply/rt9455_charger.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Binding for Richtek rt9455 battery charger
-
-Required properties:
-- compatible:				it should contain one of the following:
-					"richtek,rt9455".
-- reg:					integer, i2c address of the device.
-- interrupts:				interrupt mapping for GPIO IRQ, it should be
-					configured with IRQ_TYPE_LEVEL_LOW flag.
-- richtek,output-charge-current:	integer, output current from the charger to the
-					battery, in uA.
-- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
-					When the current in constant-voltage phase drops
-					below output_charge_current x end-of-charge-percentage,
-					charge is terminated.
-- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
-- richtek,boost-output-voltage:		integer, maximum voltage provided to consumer
-					devices, when the charger is in boost mode, in uV.
-
-Optional properties:
-- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to
-					decrease voltage level when the over current
-					of the input power source occurs.
-					This prevents input voltage drop due to insufficient
-					current provided by the power source.
-					Default: 4500000 uV (4.5V)
-- richtek,avg-input-current-regulation: integer, input current value in uA drained by the
-					charger from the power source.
-					Default: 500000 uA (500mA)
-
-Example:
-
-rt9455@22 {
-	compatible = "richtek,rt9455";
-	reg = <0x22>;
-
-	interrupt-parent = <&gpio1>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-	richtek,output-charge-current	    = <500000>;
-	richtek,end-of-charge-percentage    = <10>;
-	richtek,battery-regulation-voltage  = <4200000>;
-	richtek,boost-output-voltage	    = <5050000>;
-
-	richtek,min-input-voltage-regulation = <4500000>;
-	richtek,avg-input-current-regulation = <500000>;
-};
diff --git a/dts/Bindings/power/supply/rx51-battery.txt b/dts/Bindings/power/supply/rx51-battery.txt
deleted file mode 100644
index 90438453db..0000000000
--- a/dts/Bindings/power/supply/rx51-battery.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for Nokia N900 battery
-
-The Nokia N900 battery status can be read via the TWL4030's A/D converter.
-
-Required properties:
-- compatible: Should contain one of the following:
- * "nokia,n900-battery"
-- io-channels: Should contain IIO channel specifiers
-               for each element in io-channel-names.
-- io-channel-names: Should contain the following values:
- * "temp" - The ADC channel for temperature reading
- * "bsi"  - The ADC channel for battery size identification
- * "vbat" - The ADC channel to measure the battery voltage
-
-Example from Nokia N900:
-
-battery: n900-battery {
-	compatible = "nokia,n900-battery";
-	io-channels = <&twl4030_madc 0>,
-		      <&twl4030_madc 4>,
-		      <&twl4030_madc 12>;
-	io-channel-names = "temp",
-			   "bsi",
-			   "vbat";
-};
diff --git a/dts/Bindings/power/supply/sbs,sbs-battery.yaml b/dts/Bindings/power/supply/sbs,sbs-battery.yaml
index a90b3601e6..90b9d3d882 100644
--- a/dts/Bindings/power/supply/sbs,sbs-battery.yaml
+++ b/dts/Bindings/power/supply/sbs,sbs-battery.yaml
@@ -12,12 +12,15 @@ maintainers:
 description: |
   Battery compatible with the smart battery system specifications
 
-properties:
+allOf:
+  - $ref: power-supply.yaml#
 
+properties:
   compatible:
     oneOf:
       - items:
           - enum:
+              - ti,bq20z45
               - ti,bq20z65
               - ti,bq20z75
           - enum:
@@ -60,7 +63,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/power/supply/sbs,sbs-charger.yaml b/dts/Bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 0000000000..cb73ffa477
--- /dev/null
+++ b/dts/Bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Charger compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc4100
+          - enum:
+              - sbs,sbs-charger
+      - items:
+          - const: sbs,sbs-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@9 {
+            compatible = "lltc,ltc4100", "sbs,sbs-charger";
+            reg = <0x9>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+       };
+    };
diff --git a/dts/Bindings/power/supply/sbs,sbs-manager.txt b/dts/Bindings/power/supply/sbs,sbs-manager.txt
deleted file mode 100644
index 4b2195571a..0000000000
--- a/dts/Bindings/power/supply/sbs,sbs-manager.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Binding for sbs-manager
-
-Required properties:
-- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
-  number compatible string might be used in order to take care of vendor
-  specific registers.
-- reg: integer, i2c address of the device. Should be <0xa>.
-Optional properties:
-- gpio-controller: Marks the port as GPIO controller.
-  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
-  is used to specify optional parameters:
-  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-
-From OS view the device is basically an i2c-mux used to communicate with up to
-four smart battery devices at address 0xb. The driver actually implements this
-behaviour. So standard i2c-mux nodes can be used to register up to four slave
-batteries. Channels will be numerated starting from 1 to 4.
-
-Example:
-
-batman@a {
-    compatible = "lltc,ltc1760", "sbs,sbs-manager";
-    reg = <0x0a>;
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    gpio-controller;
-    #gpio-cells = <2>;
-
-    i2c@1 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <1>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 1 1>;
-        };
-    };
-
-    i2c@2 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <2>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 2 1>;
-        };
-    };
-
-    i2c@3 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <3>;
-
-        battery@b {
-            compatible = "ti,bq2060", "sbs,sbs-battery";
-            reg = <0x0b>;
-            sbs,battery-detect-gpios = <&batman 3 1>;
-        };
-    };
-};
diff --git a/dts/Bindings/power/supply/sbs,sbs-manager.yaml b/dts/Bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 0000000000..72e8f274c7
--- /dev/null
+++ b/dts/Bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc1760
+          - enum:
+              - sbs,sbs-manager
+      - items:
+          - const: sbs,sbs-manager
+
+  reg:
+    const: 0xa
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^i2c@[1-4]$":
+    type: object
+
+    allOf:
+      - $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      batman: battery-manager@a {
+        compatible = "lltc,ltc1760", "sbs,sbs-manager";
+        reg = <0x0a>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        i2c@1 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <1>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 1 1>;
+          };
+        };
+
+        i2c@2 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <2>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 2 1>;
+          };
+        };
+
+        i2c@3 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <3>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 3 1>;
+          };
+        };
+      };
+    };
diff --git a/dts/Bindings/power/supply/sbs_sbs-charger.txt b/dts/Bindings/power/supply/sbs_sbs-charger.txt
deleted file mode 100644
index 84e74151ee..0000000000
--- a/dts/Bindings/power/supply/sbs_sbs-charger.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-SBS sbs-charger
-~~~~~~~~~~
-
-Required properties:
- - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
-     number compatible string might be used in order to take care of vendor
-     specific registers.
-
-Optional properties:
-- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
-    "interrupt-parent". If an interrupt is not provided the driver will switch
-    automatically to polling.
-
-Example:
-
-	ltc4100@9 {
-		compatible = "lltc,ltc4100", "sbs,sbs-charger";
-		reg = <0x9>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-	};
diff --git a/dts/Bindings/power/supply/sc2731-charger.yaml b/dts/Bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 0000000000..db1aa238cd
--- /dev/null
+++ b/dts/Bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum SC2731 PMICs battery charger binding
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: sprd,sc2731-charger
+
+  reg:
+    maxItems: 1
+
+  phys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the USB phy
+
+  monitored-battery:
+    description: |
+      The charger uses the following battery properties
+      - charge-term-current-microamp: current for charge termination phase.
+      - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+      See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      charge-term-current-microamp = <120000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-charger";
+        reg = <0x0>;
+        phys = <&ssphy>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/sc2731_charger.txt b/dts/Bindings/power/supply/sc2731_charger.txt
deleted file mode 100644
index 5266fab165..0000000000
--- a/dts/Bindings/power/supply/sc2731_charger.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Spreadtrum SC2731 PMIC battery charger binding
-
-Required properties:
- - compatible: Should be "sprd,sc2731-charger".
- - reg: Address offset of charger register.
- - phys: Contains a phandle to the USB phy.
-
-Optional Properties:
-- monitored-battery: phandle of battery characteristics devicetree node.
-  The charger uses the following battery properties:
-- charge-term-current-microamp: current for charge termination phase.
-- constant-charge-voltage-max-microvolt: maximum constant input voltage.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		charge-term-current-microamp = <120000>;
-		constant-charge-voltage-max-microvolt = <4350000>;
-		......
-	};
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		charger@0 {
-			compatible = "sprd,sc2731-charger";
-			reg = <0x0>;
-			phys = <&ssphy>;
-			monitored-battery = <&bat>;
-		};
-	};
diff --git a/dts/Bindings/power/supply/sc27xx-fg.txt b/dts/Bindings/power/supply/sc27xx-fg.txt
deleted file mode 100644
index b6359b5903..0000000000
--- a/dts/Bindings/power/supply/sc27xx-fg.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
-
-Required properties:
-- compatible: Should be one of the following:
-  "sprd,sc2720-fgu",
-  "sprd,sc2721-fgu",
-  "sprd,sc2723-fgu",
-  "sprd,sc2730-fgu",
-  "sprd,sc2731-fgu".
-- reg: The address offset of fuel gauge unit.
-- battery-detect-gpios: GPIO for battery detection.
-- io-channels: Specify the IIO ADC channels to get temperature and charge voltage.
-- io-channel-names: Should be "bat-temp" or "charge-vol".
-- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
-- nvmem-cell-names: Should be "fgu_calib".
-- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter
-  chip in micro Ohms.
-- monitored-battery: Phandle of battery characteristics devicetree node.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <1900000>;
-		constant-charge-voltage-max-microvolt = <4350000>;
-		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
-					<4022000 85>, <3983000 80>, <3949000 75>,
-					<3917000 70>, <3889000 65>, <3864000 60>,
-					<3835000 55>, <3805000 50>, <3787000 45>,
-					<3777000 40>, <3773000 35>, <3770000 30>,
-					<3765000 25>, <3752000 20>, <3724000 15>,
-					<3680000 10>, <3605000 5>, <3400000 0>;
-		......
-	};
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fgu@a00 {
-			compatible = "sprd,sc2731-fgu";
-			reg = <0xa00>;
-			battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
-			io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
-			io-channel-names = "bat-temp", "charge-vol";
-			nvmem-cells = <&fgu_calib>;
-			nvmem-cell-names = "fgu_calib";
-			monitored-battery = <&bat>;
-			sprd,calib-resistance-micro-ohms = <21500>;
-		};
-	};
diff --git a/dts/Bindings/power/supply/sc27xx-fg.yaml b/dts/Bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 0000000000..e019cffd1f
--- /dev/null
+++ b/dts/Bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-fgu
+      - sprd,sc2721-fgu
+      - sprd,sc2723-fgu
+      - sprd,sc2730-fgu
+      - sprd,sc2731-fgu
+
+  reg:
+    maxItems: 1
+
+  battery-detect-gpios:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: Battery Temperature ADC
+      - description: Battery Charge Voltage ADC
+
+  io-channel-names:
+    items:
+      - const: bat-temp
+      - const: charge-vol
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration cells provided by eFuse device
+
+  nvmem-cell-names:
+    const: fgu_calib
+
+  sprd,calib-resistance-micro-ohms:
+    description: real resistance of coulomb counter chip in micro Ohms
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - reg
+  - battery-detect-gpios
+  - io-channels
+  - io-channel-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - sprd,calib-resistance-micro-ohms
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bat: battery {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <1900000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+      ocv-capacity-celsius = <20>;
+      ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+                             <4022000 85>, <3983000 80>, <3949000 75>,
+                             <3917000 70>, <3889000 65>, <3864000 60>,
+                             <3835000 55>, <3805000 50>, <3787000 45>,
+                             <3777000 40>, <3773000 35>, <3770000 30>,
+                             <3765000 25>, <3752000 20>, <3724000 15>,
+                             <3680000 10>, <3605000 5>, <3400000 0>;
+                             // ...
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-fgu";
+        reg = <0xa00>;
+        battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+        io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+        io-channel-names = "bat-temp", "charge-vol";
+        nvmem-cells = <&fgu_calib>;
+        nvmem-cell-names = "fgu_calib";
+        monitored-battery = <&bat>;
+        sprd,calib-resistance-micro-ohms = <21500>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/ab8500/fg.txt b/dts/Bindings/power/supply/stericsson,ab8500-battery.txt
index ccafcb9112..ee125cb0e4 100644
--- a/dts/Bindings/power/supply/ab8500/fg.txt
+++ b/dts/Bindings/power/supply/stericsson,ab8500-battery.txt
@@ -1,32 +1,9 @@
-=== AB8500 Fuel Gauge Driver ===
-
-AB8500 is a mixed signal multimedia and power management
-device comprising: power and energy-management-module,
-wall-charger, usb-charger, audio codec, general purpose adc,
-tvout, clock management and sim card interface.
-
-Fuelgauge support is part of energy-management-modules, other
-components of this module are:
-main-charger, usb-combo-charger and battery-temperature-monitoring.
-
-The properties below describes the node for fuelgauge driver.
-
-Required Properties:
-- compatible = This shall be: "stericsson,ab8500-fg"
-- battery = Shall be battery specific information
-	Example:
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-	};
-
-dependent node:
-	ab8500_battery: ab8500_battery {
-	};
-	This node will provide information on 'thermistor interface' and
-	'battery technology type' used.
+AB85000 PMIC contains a node, which contains shared
+information about the battery connected to the PMIC.
+The node has no compatible property.
 
 Properties of this node are:
+
 thermistor-on-batctrl:
 	A boolean value indicating thermistor interface	to battery
 
@@ -55,4 +32,3 @@ battery-type:
 	ab8500_battery: ab8500_battery {
 		stericsson,battery-type = "LIPO";
 	}
-
diff --git a/dts/Bindings/power/supply/stericsson,ab8500-btemp.yaml b/dts/Bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 0000000000..2f57aa5a5f
--- /dev/null
+++ b/dts/Bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-btemp
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: BAT_CTRL_INDB
+      - const: BTEMP_LOW
+      - const: BTEMP_HIGH
+      - const: BTEMP_LOW_MEDIUM
+      - const: BTEMP_MEDIUM_HIGH
+
+  io-channels:
+    maxItems: 2
+
+  io-channel-names:
+    items:
+      - const: btemp_ball
+      - const: bat_ctrl
+
+required:
+  - compatible
+  - battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      battery-temperature {
+        compatible = "stericsson,ab8500-btemp";
+        battery = <&ab8500_battery>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+                     <80 IRQ_TYPE_LEVEL_HIGH>,
+                     <83 IRQ_TYPE_LEVEL_HIGH>,
+                     <81 IRQ_TYPE_LEVEL_HIGH>,
+                     <82 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "BAT_CTRL_INDB",
+                          "BTEMP_LOW",
+                          "BTEMP_HIGH",
+                          "BTEMP_LOW_MEDIUM",
+                          "BTEMP_MEDIUM_HIGH";
+        io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+        io-channel-names = "btemp_ball", "bat_ctrl";
+      };
+    };
diff --git a/dts/Bindings/power/supply/stericsson,ab8500-chargalg.yaml b/dts/Bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 0000000000..0897231c2f
--- /dev/null
+++ b/dts/Bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-chargalg
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+required:
+  - compatible
+  - battery
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charging-algorithm {
+        compatible = "stericsson,ab8500-chargalg";
+        battery = <&ab8500_battery>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/stericsson,ab8500-charger.yaml b/dts/Bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 0000000000..e13305afea
--- /dev/null
+++ b/dts/Bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AB8500 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-charger
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  vddadc-supply:
+    description: Supply for USB and Main charger
+
+  autopower_cfg:
+    type: boolean
+    description: automatic poweron after powerloss
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: MAIN_CH_UNPLUG_DET
+      - const: MAIN_CHARGE_PLUG_DET
+      - const: MAIN_EXT_CH_NOT_OK
+      - const: MAIN_CH_TH_PROT_R
+      - const: MAIN_CH_TH_PROT_F
+      - const: VBUS_DET_F
+      - const: VBUS_DET_R
+      - const: USB_LINK_STATUS
+      - const: USB_CH_TH_PROT_R
+      - const: USB_CH_TH_PROT_F
+      - const: USB_CHARGER_NOT_OKR
+      - const: VBUS_OVV
+      - const: CH_WD_EXP
+      - const: VBUS_CH_DROP_END
+
+  io-channels:
+    minItems: 2
+    maxItems: 4
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - const: main_charger_v
+          - const: main_charger_c
+          - const: vbus_v
+          - const: usb_charger_c
+      - items:
+          - const: vbus_v
+          - const: usb_charger_c
+
+
+required:
+  - compatible
+  - battery
+  - vddadc-supply
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "stericsson,ab8500-charger";
+        battery = <&ab8500_battery>;
+        vddadc-supply = <&ab8500_ldo_tvout_reg>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+                     <11 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 IRQ_TYPE_LEVEL_HIGH>,
+                     <107 IRQ_TYPE_LEVEL_HIGH>,
+                     <106 IRQ_TYPE_LEVEL_HIGH>,
+                     <14 IRQ_TYPE_LEVEL_HIGH>,
+                     <15 IRQ_TYPE_LEVEL_HIGH>,
+                     <79 IRQ_TYPE_LEVEL_HIGH>,
+                     <105 IRQ_TYPE_LEVEL_HIGH>,
+                     <104 IRQ_TYPE_LEVEL_HIGH>,
+                     <89 IRQ_TYPE_LEVEL_HIGH>,
+                     <22 IRQ_TYPE_LEVEL_HIGH>,
+                     <21 IRQ_TYPE_LEVEL_HIGH>,
+                     <16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "MAIN_CH_UNPLUG_DET",
+                          "MAIN_CHARGE_PLUG_DET",
+                          "MAIN_EXT_CH_NOT_OK",
+                          "MAIN_CH_TH_PROT_R",
+                          "MAIN_CH_TH_PROT_F",
+                          "VBUS_DET_F",
+                          "VBUS_DET_R",
+                          "USB_LINK_STATUS",
+                          "USB_CH_TH_PROT_R",
+                          "USB_CH_TH_PROT_F",
+                          "USB_CHARGER_NOT_OKR",
+                          "VBUS_OVV",
+                          "CH_WD_EXP",
+                          "VBUS_CH_DROP_END";
+        io-channels = <&gpadc 0x03>,
+                      <&gpadc 0x0a>,
+                      <&gpadc 0x09>,
+                      <&gpadc 0x0b>;
+        io-channel-names = "main_charger_v",
+                           "main_charger_c",
+                           "vbus_v",
+                           "usb_charger_c";
+      };
+    };
diff --git a/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml b/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 0000000000..db342e5ac0
--- /dev/null
+++ b/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-fg
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: NCONV_ACCU
+      - const: BATT_OVV
+      - const: LOW_BAT_F
+      - const: CC_INT_CALIB
+      - const: CCEOC
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    items:
+      - const: main_bat_v
+
+required:
+  - compatible
+  - battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      fuel-gauge {
+        compatible = "stericsson,ab8500-fg";
+        battery = <&ab8500_battery>;
+        interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                     <8 IRQ_TYPE_LEVEL_HIGH>,
+                     <28 IRQ_TYPE_LEVEL_HIGH>,
+                     <27 IRQ_TYPE_LEVEL_HIGH>,
+                     <26 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "NCONV_ACCU",
+                          "BATT_OVV",
+                          "LOW_BAT_F",
+                          "CC_INT_CALIB",
+                          "CCEOC";
+        io-channels = <&gpadc 0x08>;
+        io-channel-names = "main_bat_v";
+      };
+    };
diff --git a/dts/Bindings/power/supply/ti,bq24735.txt b/dts/Bindings/power/supply/ti,bq24735.txt
deleted file mode 100644
index de45e1a2a4..0000000000
--- a/dts/Bindings/power/supply/ti,bq24735.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-TI BQ24735 Charge Controller
-~~~~~~~~~~
-
-Required properties :
- - compatible : "ti,bq24735"
-
-Optional properties :
- - interrupts : Specify the interrupt to be used to trigger when the AC
-   adapter is either plugged in or removed.
- - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
-   status. This is a Host GPIO that is configured as an input and connected
-   to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
-   the GPIO must be active on AC adapter absence despite ACOK being active
-   (high) on AC adapter presence.
- - ti,charge-current : Used to control and set the charging current. This value
-   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
-   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
-   about the ChargeCurrent (0x14h) register.
- - ti,charge-voltage : Used to control and set the charging voltage. This value
-   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
-   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
-   about the ChargeVoltage (0x15h) register.
- - ti,input-current : Used to control and set the charger input current. This
-   value must be between 128mA and 8.064A with a 128mA step resolution. The
-   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
-   more information about the InputCurrent (0x3fh) register.
- - ti,external-control : Indicates that the charger is configured externally
-   and that the host should not attempt to enable/disable charging or set the
-   charge voltage/current.
- - poll-interval : In case 'interrupts' is not specified, poll AC adapter
-   presence with this interval (milliseconds).
-
-Example:
-
-	bq24735@9 {
-		compatible = "ti,bq24735";
-		reg = <0x9>;
-		ti,ac-detect-gpios = <&gpio 72 0x1>;
-	}
diff --git a/dts/Bindings/power/supply/ti,lp8727.yaml b/dts/Bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 0000000000..a23f6653f3
--- /dev/null
+++ b/dts/Bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI/National Semiconductor LP8727 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,lp8727
+
+  reg:
+    const: 0x27
+
+  interrupts:
+    maxItems: 1
+
+  debounce-ms:
+    description: interrupt debounce time in ms
+
+patternProperties:
+  '^(ac|usb)$':
+    type: object
+    description: USB/AC charging parameters
+    properties:
+      charger-type:
+        enum:
+          - ac
+          - usb
+
+      eoc-level:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 6
+        description: |
+          End of Charge Percentage with the following mapping:
+          0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+      charging-current:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 9
+        description: |
+          Charging current with the following mapping:
+          0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+          6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lp8727: charger@27 {
+        compatible = "ti,lp8727";
+        reg = <0x27>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+        debounce-ms = <300>;
+
+        /* AC charger: 5% EOC and 500mA charging current */
+        ac {
+          charger-type = "ac";
+          eoc-level = /bits/ 8 <0>;
+          charging-current = /bits/ 8 <4>;
+        };
+
+        /* USB charger: 10% EOC and 400mA charging current */
+        usb {
+          charger-type = "usb";
+          eoc-level = /bits/ 8 <1>;
+          charging-current = /bits/ 8 <2>;
+        };
+      };
+    };
+
diff --git a/dts/Bindings/power/supply/tps65090-charger.yaml b/dts/Bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 0000000000..f2dd38bf07
--- /dev/null
+++ b/dts/Bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65090-charger
+
+  ti,enable-low-current-chrg:
+    type: boolean
+    description: |
+      Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65090-charger";
+        ti,enable-low-current-chrg;
+      };
+    };
diff --git a/dts/Bindings/power/supply/tps65090.txt b/dts/Bindings/power/supply/tps65090.txt
deleted file mode 100644
index 8e5e0d3910..0000000000
--- a/dts/Bindings/power/supply/tps65090.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-TPS65090 Frontend PMU with Switchmode Charger
-
-Required Properties:
--compatible: "ti,tps65090-charger"
-
-Optional Properties:
--ti,enable-low-current-chrg: Enables charging when a low current is detected
- while the default logic is to stop charging.
-
-This node is a subnode of the tps65090 PMIC.
-
-Example:
-
-	tps65090-charger {
-		compatible = "ti,tps65090-charger";
-		ti,enable-low-current-chrg;
-	};
diff --git a/dts/Bindings/power/supply/tps65217-charger.yaml b/dts/Bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 0000000000..a33408c3a4
--- /dev/null
+++ b/dts/Bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TPS65217 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65217-charger
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: USB
+      - const: AC
+      
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65217-charger";
+        interrupts = <0>, <1>;
+        interrupt-names = "USB", "AC";
+      };
+    };
diff --git a/dts/Bindings/power/supply/tps65217_charger.txt b/dts/Bindings/power/supply/tps65217_charger.txt
deleted file mode 100644
index a11072c5a8..0000000000
--- a/dts/Bindings/power/supply/tps65217_charger.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-TPS65217 Charger
-
-Required Properties:
--compatible: "ti,tps65217-charger"
--interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
-             Should be <0> for the USB charger and <1> for the AC adapter.
--interrupt-names: Should be "USB" and "AC"
-
-This node is a subnode of the tps65217 PMIC.
-
-Example:
-
-	tps65217-charger {
-		compatible = "ti,tps65217-charger";
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-	};
diff --git a/dts/Bindings/power/supply/twl-charger.txt b/dts/Bindings/power/supply/twl-charger.txt
deleted file mode 100644
index 3b4ea1b73b..0000000000
--- a/dts/Bindings/power/supply/twl-charger.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-TWL BCI (Battery Charger Interface)
-
-The battery charger needs to interact with the USB phy in order
-to know when charging is permissible, and when there is a connection
-or disconnection.
-
-The choice of phy cannot be configured at a hardware level, so there
-is no value in explicit configuration in device-tree.  Rather
-if there is a sibling of the BCI node which is compatible with
-"ti,twl4030-usb", then that is used to determine when and how
-use USB power for charging.
-
-Required properties:
-- compatible:
-  - "ti,twl4030-bci"
-- interrupts: two interrupt lines from the TWL SIH (secondary
-  interrupt handler) - interrupts 9 and 2.
-
-Optional properties:
-- ti,bb-uvolt: microvolts for charging the backup battery.
-- ti,bb-uamp: microamps for charging the backup battery.
-
-Examples:
-
-bci {
-   compatible = "ti,twl4030-bci";
-   interrupts = <9>, <2>;
-   ti,bb-uvolt = <3200000>;
-   ti,bb-uamp = <150>;
-};
diff --git a/dts/Bindings/power/supply/twl4030-charger.yaml b/dts/Bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 0000000000..fe3f32a0ea
--- /dev/null
+++ b/dts/Bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+  The battery charger needs to interact with the USB phy in order to know when
+  charging is permissible, and when there is a connection or disconnection.
+
+  The choice of phy cannot be configured at a hardware level, so there is no
+  value in explicit configuration in device-tree. Rather if there is a sibling
+  of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+  to determine when and how use USB power for charging.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,twl4030-bci
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  ti,bb-uvolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microvolts for charging the backup battery
+
+  ti,bb-uamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microamps for charging the backup battery
+
+  io-channels:
+    items:
+      - description: Accessory Charger Voltage Channel
+
+  io-channel-names:
+    items:
+      - const: vac
+
+  bci3v1-supply:
+    description: 3.1V USB regulator
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,twl4030-bci";
+        interrupts = <9>, <2>;
+        ti,bb-uvolt = <3200000>;
+        ti,bb-uamp = <150>;
+        io-channels = <&twl_madc 11>;
+        io-channel-names = "vac";
+      };
+    };
diff --git a/dts/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/dts/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 0000000000..dcda6660b8
--- /dev/null
+++ b/dts/Bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AXP20x AC power-supply
+
+description: |
+  The AXP20X can read the current current and voltage supplied by AC by
+  reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+  tell if an AC power supply is present and usable. AXP813/AXP803 are
+  able to limit current and supply voltage
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - x-powers,axp202-ac-power-supply
+      - x-powers,axp221-ac-power-supply
+      - x-powers,axp813-ac-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/dts/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/dts/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 0000000000..86e8a713d4
--- /dev/null
+++ b/dts/Bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AXP20x Battery power-supply
+
+description: |
+  The supported devices can read the battery voltage, charge and discharge
+  currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - x-powers,axp209-battery-power-supply
+      - x-powers,axp221-battery-power-supply
+      - x-powers,axp813-battery-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 0000000000..61f1b320c1
--- /dev/null
+++ b/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AXP20x USB power-supply
+
+description: |
+  The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+  variations such as the former being able to set the VBUS power supply max
+  current to 100mA, unlike the latter.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - x-powers,axp202-usb-power-supply
+      - x-powers,axp221-usb-power-supply
+      - x-powers,axp223-usb-power-supply
+      - x-powers,axp813-usb-power-supply
+
+
+required:
+  - compatible
+
+additionalProperties: false