dts: update to v4.12-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 81 insertions, 3 deletions

diff --git a/dts/Bindings/power/supply/axp20x_battery.txt b/dts/Bindings/power/supply/axp20x_battery.txt
new file mode 100644
index 0000000000..c24886676a
--- /dev/null
+++ b/dts/Bindings/power/supply/axp20x_battery.txt
@@ -0,0 +1,20 @@
+AXP20x and AXP22x battery power supply
+
+Required Properties:
+ - compatible, one of:
+			"x-powers,axp209-battery-power-supply"
+			"x-powers,axp221-battery-power-supply"
+
+This node is a subnode of the axp20x/axp22x PMIC.
+
+The AXP20X and AXP22X can read the battery voltage, charge and discharge
+currents of the battery by reading ADC channels from the AXP20X/AXP22X
+ADC.
+
+Example:
+
+&axp209 {
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp209-battery-power-supply";
+	}
+};
diff --git a/dts/Bindings/power/supply/cpcap-charger.txt b/dts/Bindings/power/supply/cpcap-charger.txt
new file mode 100644
index 0000000000..80bd873c3b
--- /dev/null
+++ b/dts/Bindings/power/supply/cpcap-charger.txt
@@ -0,0 +1,37 @@
+Motorola CPCAP PMIC battery charger binding
+
+Required properties:
+- compatible: Shall be "motorola,mapphone-cpcap-charger"
+- interrupts: Interrupt specifier for each name in interrupt-names
+- interrupt-names: Should contain the following entries:
+		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+		   "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
+- io-channels: IIO ADC channel specifier for each name in io-channel-names
+- io-channel-names: Should contain the following entries:
+		    "battdetb", "battp", "vbus", "chg_isense", "batti"
+
+Optional properties:
+- mode-gpios: Optionally CPCAP charger can have a companion wireless
+	      charge controller that is controlled with two GPIOs
+	      that are active low.
+
+Example:
+
+cpcap_charger: charger {
+	compatible = "motorola,mapphone-cpcap-charger";
+	interrupts-extended = <
+		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+		&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+	>;
+	interrupt-names =
+		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+		"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+		      &gpio3 23 GPIO_ACTIVE_LOW>;
+	io-channels = <&cpcap_adc 0 &cpcap_adc 1
+		       &cpcap_adc 2 &cpcap_adc 5
+		       &cpcap_adc 6>;
+	io-channel-names = "battdetb", "battp",
+			   "vbus", "chg_isense",
+			   "batti";
+};
diff --git a/dts/Bindings/power/supply/lego_ev3_battery.txt b/dts/Bindings/power/supply/lego_ev3_battery.txt
new file mode 100644
index 0000000000..5485633b1f
--- /dev/null
+++ b/dts/Bindings/power/supply/lego_ev3_battery.txt
@@ -0,0 +1,21 @@
+LEGO MINDSTORMS EV3 Battery
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+detected by a key switch in the battery compartment.
+
+Required properties:
+ - compatible: Must be "lego,ev3-battery"
+ - io-channels: phandles to analog inputs for reading voltage and current
+ - io-channel-names: Must be "voltage", "current"
+ - rechargeable-gpios: phandle to the rechargeable battery indication gpio
+
+Example:
+
+	battery {
+		compatible = "lego,ev3-battery";
+		io-channels = <&adc 4>, <&adc 3>;
+		io-channel-names = "voltage", "current";
+		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+	};
diff --git a/dts/Bindings/power/supply/ltc2941.txt b/dts/Bindings/power/supply/ltc2941.txt
index ea42ae12d9..a9d7aa6055 100644
--- a/dts/Bindings/power/supply/ltc2941.txt
+++ b/dts/Bindings/power/supply/ltc2941.txt
@@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion
 formula for the charge counter.
 
 Required properties:
-- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
-    type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
+    indicates the type of I2C chip attached.
 - reg: The 7-bit I2C address.
 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
     negative value when the battery has been connected to the wrong end of the
@@ -20,7 +20,7 @@ Required properties:
 Example from the Topic Miami Florida board:
 
 	fuelgauge: ltc2943@64 {
-		compatible = "ltc2943";
+		compatible = "lltc,ltc2943";
 		reg = <0x64>;
 		lltc,resistor-sense = <15>;
 		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
diff --git a/dts/Bindings/power/supply/max8925_batter.txt b/dts/Bindings/power/supply/max8925_battery.txt
index d7e3e0c0f7..d7e3e0c0f7 100644
--- a/dts/Bindings/power/supply/max8925_batter.txt
+++ b/dts/Bindings/power/supply/max8925_battery.txt