dts: update to v4.9-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

29 files changed, 1046 insertions, 0 deletions

diff --git a/dts/Bindings/power/supply/ab8500/btemp.txt b/dts/Bindings/power/supply/ab8500/btemp.txt
new file mode 100644
index 0000000000..0ba1bcc7f3
--- /dev/null
+++ b/dts/Bindings/power/supply/ab8500/btemp.txt
@@ -0,0 +1,16 @@
+=== AB8500 Battery Temperature Monitor Driver ===
+
+The properties below describes the node for btemp driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-btemp"
+- battery = Shall be battery specific information
+
+	Example:
+	ab8500_btemp {
+		compatible = "stericsson,ab8500-btemp";
+		battery	   = <&ab8500_battery>;
+	};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/ab8500/chargalg.txt b/dts/Bindings/power/supply/ab8500/chargalg.txt
new file mode 100644
index 0000000000..ef53283711
--- /dev/null
+++ b/dts/Bindings/power/supply/ab8500/chargalg.txt
@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+	compatible = "stericsson,ab8500-chargalg";
+	battery	   = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/ab8500/charger.txt b/dts/Bindings/power/supply/ab8500/charger.txt
new file mode 100644
index 0000000000..6bdbb08ea9
--- /dev/null
+++ b/dts/Bindings/power/supply/ab8500/charger.txt
@@ -0,0 +1,25 @@
+=== AB8500 Charger Driver ===
+
+Required Properties:
+- compatible = Shall be "stericsson,ab8500-charger"
+- battery = Shall be battery specific information
+	Example:
+	ab8500_charger {
+		compatible = "stericsson,ab8500-charger";
+		battery	   = <&ab8500_battery>;
+	};
+
+- vddadc-supply: Supply for USB and Main charger
+	Example:
+	ab8500-charger {
+		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+	}
+- autopower_cfg:
+	Boolean value depicting the presence of 'automatic poweron after powerloss'
+	Example:
+	ab8500-charger {
+		autopower_cfg;
+	};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/dts/Bindings/power/supply/ab8500/fg.txt b/dts/Bindings/power/supply/ab8500/fg.txt
new file mode 100644
index 0000000000..ccafcb9112
--- /dev/null
+++ b/dts/Bindings/power/supply/ab8500/fg.txt
@@ -0,0 +1,58 @@
+=== AB8500 Fuel Gauge Driver ===
+
+AB8500 is a mixed signal multimedia and power management
+device comprising: power and energy-management-module,
+wall-charger, usb-charger, audio codec, general purpose adc,
+tvout, clock management and sim card interface.
+
+Fuelgauge support is part of energy-management-modules, other
+components of this module are:
+main-charger, usb-combo-charger and battery-temperature-monitoring.
+
+The properties below describes the node for fuelgauge driver.
+
+Required Properties:
+- compatible = This shall be: "stericsson,ab8500-fg"
+- battery = Shall be battery specific information
+	Example:
+	ab8500_fg {
+		compatible = "stericsson,ab8500-fg";
+		battery	   = <&ab8500_battery>;
+	};
+
+dependent node:
+	ab8500_battery: ab8500_battery {
+	};
+	This node will provide information on 'thermistor interface' and
+	'battery technology type' used.
+
+Properties of this node are:
+thermistor-on-batctrl:
+	A boolean value indicating thermistor interface	to battery
+
+	Note:
+	'btemp' and 'batctrl' are the pins interfaced for battery temperature
+	measurement, 'btemp' signal is used when NTC(negative temperature
+	coefficient) resister is interfaced external to battery whereas
+	'batctrl' pin is used when NTC resister is internal to battery.
+
+	Example:
+	ab8500_battery: ab8500_battery {
+		thermistor-on-batctrl;
+	};
+	indicates: NTC resister is internal to battery, 'batctrl' is used
+		for thermal measurement.
+
+	The absence of property 'thermal-on-batctrl' indicates
+	NTC resister is external to battery and  'btemp' signal is used
+	for thermal measurement.
+
+battery-type:
+	This shall be the battery manufacturing technology type,
+	allowed types are:
+		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+	Example:
+	ab8500_battery: ab8500_battery {
+		stericsson,battery-type = "LIPO";
+	}
+
diff --git a/dts/Bindings/power/supply/act8945a-charger.txt b/dts/Bindings/power/supply/act8945a-charger.txt
new file mode 100644
index 0000000000..de78d761ce
--- /dev/null
+++ b/dts/Bindings/power/supply/act8945a-charger.txt
@@ -0,0 +1,48 @@
+Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
+
+Required properties:
+ - compatible: "active-semi,act8945a-charger".
+ - active-semi,chglev-gpios: charge current level phandle with args
+   as described in ../gpio/gpio.txt.
+ - active-semi,lbo-gpios: specify the low battery voltage detect phandle
+   with args as as described in ../gpio/gpio.txt.
+ - interrupts: <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.
+ - interrupt-parent: the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Optional properties:
+ - active-semi,input-voltage-threshold-microvolt: unit: mV;
+   Specifies the charger's input over-voltage threshold value;
+   The value can be: 6600, 7000, 7500, 8000; default: 6600
+ - active-semi,precondition-timeout: unit: minutes;
+   Specifies the charger's PRECONDITION safety timer setting value;
+   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
+   default: 40.
+ - active-semi,total-timeout: unit: hours;
+   Specifies the charger's total safety timer setting value;
+   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
+   default: 3.
+
+Example:
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		status = "okay";
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <45 GPIO_ACTIVE_LOW>;
+
+			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+			status = "okay";
+		};
+	};
diff --git a/dts/Bindings/power/supply/axp20x_usb_power.txt b/dts/Bindings/power/supply/axp20x_usb_power.txt
new file mode 100644
index 0000000000..f1d7beec45
--- /dev/null
+++ b/dts/Bindings/power/supply/axp20x_usb_power.txt
@@ -0,0 +1,35 @@
+AXP20x USB power supply
+
+Required Properties:
+-compatible: One of: "x-powers,axp202-usb-power-supply"
+                     "x-powers,axp221-usb-power-supply"
+
+This node is a subnode of the axp20x PMIC.
+
+Example:
+
+axp209: pmic@34 {
+	compatible = "x-powers,axp209";
+	reg = <0x34>;
+	interrupt-parent = <&nmi_intc>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		x-powers,dcdc-freq = <1500>;
+
+		vdd_cpu: dcdc2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-name = "vdd-cpu";
+		};
+
+		...
+	};
+
+	usb-power-supply: usb-power-supply {
+		compatible = "x-powers,axp202-usb-power-supply";
+	};
+};
diff --git a/dts/Bindings/power/supply/bq2415x.txt b/dts/Bindings/power/supply/bq2415x.txt
new file mode 100644
index 0000000000..d0327f0b59
--- /dev/null
+++ b/dts/Bindings/power/supply/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/dts/Bindings/power/supply/bq24257.txt b/dts/Bindings/power/supply/bq24257.txt
new file mode 100644
index 0000000000..d693702c9c
--- /dev/null
+++ b/dts/Bindings/power/supply/bq24257.txt
@@ -0,0 +1,64 @@
+Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24250"
+ * "ti,bq24251"
+ * "ti,bq24257"
+- reg: integer, i2c address of the device.
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+    conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
+    conjunction with "interrupt-parent".
+- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
+- ti,charge-current: integer, maximum charging current in uA.
+- ti,termination-current: integer, charge will be terminated when current in
+    constant-voltage phase drops below this value (in uA).
+
+Optional properties:
+- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin.
+    This pin is not available on all devices however it should be used if
+    possible as this is the recommended way to obtain the charger's input PG
+    state. If this pin is not specified a software-based approach for PG
+    detection is used.
+- ti,current-limit: The maximum current to be drawn from the charger's input
+    (in uA). If this property is not specified, the input limit current is
+    set automatically using USB D+/D- signal based charger type detection.
+    If the hardware does not support the D+/D- based detection, a default
+    of 500,000 is used (=500mA) instead.
+- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If
+    not specified a default of 6,5000,000 (=6.5V) is used.
+- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic
+    power path management (in uV). If not specified a default of 4,360,000
+    (=4.36V) is used.
+
+Example:
+
+bq24257 {
+	compatible = "ti,bq24257";
+	reg = <0x6a>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+	pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+	ti,battery-regulation-voltage = <4200000>;
+	ti,charge-current = <1000000>;
+	ti,termination-current = <50000>;
+};
+
+Example:
+
+bq24250 {
+	compatible = "ti,bq24250";
+	reg = <0x6a>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+	ti,battery-regulation-voltage = <4200000>;
+	ti,charge-current = <500000>;
+	ti,termination-current = <50000>;
+	ti,current-limit = <900000>;
+	ti,ovp-voltage = <9500000>;
+	ti,in-dpm-voltage = <4440000>;
+};
diff --git a/dts/Bindings/power/supply/bq25890.txt b/dts/Bindings/power/supply/bq25890.txt
new file mode 100644
index 0000000000..c9dd17d142
--- /dev/null
+++ b/dts/Bindings/power/supply/bq25890.txt
@@ -0,0 +1,46 @@
+Binding for TI bq25890 Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+    * "ti,bq25890"
+- reg: integer, i2c address of the device.
+- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
+- ti,charge-current: integer, maximum charging current (in uA);
+- ti,termination-current: integer, charge will be terminated when current in
+    constant-voltage phase drops below this value (in uA);
+- ti,precharge-current: integer, maximum charge current during precharge
+    phase (in uA);
+- ti,minimum-sys-voltage: integer, when battery is charging and it is below
+    minimum system voltage, the system will be regulated above
+    minimum-sys-voltage setting (in uV);
+- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV);
+- ti,boost-max-current: integer, maximum allowed current draw in boost mode
+    (in uA).
+
+Optional properties:
+- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz,
+    otherwise 1.5MHz;
+- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
+    input current will be the lower between the resistor setting and the IINLIM
+    register setting;
+- ti,thermal-regulation-threshold: integer, temperature above which the charge
+    current is lowered, to avoid overheating (in degrees Celsius). If omitted,
+    the default setting will be used (120 degrees);
+
+Example:
+
+bq25890 {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+};
diff --git a/dts/Bindings/power/supply/charger-manager.txt b/dts/Bindings/power/supply/charger-manager.txt
new file mode 100644
index 0000000000..ec4fe9de31
--- /dev/null
+++ b/dts/Bindings/power/supply/charger-manager.txt
@@ -0,0 +1,81 @@
+charger-manager bindings
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "charger-manager"
+ - <>-supply : for regulator consumer
+ - cm-num-chargers : number of chargers
+ - cm-chargers : name of chargers
+ - cm-fuel-gauge : name of battery fuel gauge
+ - subnode <regulator> :
+	- cm-regulator-name : name of charger regulator
+	- subnode <cable> :
+		- cm-cable-name : name of charger cable
+		- cm-cable-extcon : name of extcon dev
+(optional)	- cm-cable-min : minimum current of cable
+(optional)	- cm-cable-max : maximum current of cable
+
+Optional properties :
+ - cm-name : charger manager's name (default : "battery")
+ - cm-poll-mode : polling mode (enum polling_modes)
+ - cm-poll-interval : polling interval
+ - cm-battery-stat : battery status (enum data_source)
+ - cm-fullbatt-* : data for full battery checking
+ - cm-thermal-zone : name of external thermometer's thermal zone
+ - cm-battery-* : threshold battery temperature for charging
+	-cold : critical cold temperature of battery for charging
+	-cold-in-minus : flag that cold temperature is in minus degrees
+	-hot : critical hot temperature of battery for charging
+	-temp-diff : temperature difference to allow recharging
+ - cm-dis/charging-max = limits of charging duration
+
+Example :
+	charger-manager@0 {
+		compatible = "charger-manager";
+		chg-reg-supply = <&charger_regulator>;
+
+		cm-name = "battery";
+		/* Always polling ON : 30s */
+		cm-poll-mode = <1>;
+		cm-poll-interval = <30000>;
+
+		cm-fullbatt-vchkdrop-ms = <30000>;
+		cm-fullbatt-vchkdrop-volt = <150000>;
+		cm-fullbatt-soc = <100>;
+
+		cm-battery-stat = <3>;
+
+		cm-num-chargers = <3>;
+		cm-chargers = "charger0", "charger1", "charger2";
+
+		cm-fuel-gauge = "fuelgauge0";
+
+		cm-thermal-zone = "thermal_zone.1"
+		/* in deci centigrade */
+		cm-battery-cold = <50>;
+		cm-battery-cold-in-minus;
+		cm-battery-hot = <800>;
+		cm-battery-temp-diff = <100>;
+
+		/* Allow charging for 5hr */
+		cm-charging-max = <18000000>;
+		/* Allow discharging for 2hr */
+		cm-discharging-max = <7200000>;
+
+		regulator@0 {
+			cm-regulator-name = "chg-reg";
+			cable@0 {
+				cm-cable-name = "USB";
+				cm-cable-extcon = "extcon-dev.0";
+				cm-cable-min = <475000>;
+				cm-cable-max = <500000>;
+			};
+			cable@1 {
+				cm-cable-name = "TA";
+				cm-cable-extcon = "extcon-dev.0";
+				cm-cable-min = <650000>;
+				cm-cable-max = <675000>;
+			};
+		};
+
+	};
diff --git a/dts/Bindings/power/supply/da9150-charger.txt b/dts/Bindings/power/supply/da9150-charger.txt
new file mode 100644
index 0000000000..f3906663c4
--- /dev/null
+++ b/dts/Bindings/power/supply/da9150-charger.txt
@@ -0,0 +1,26 @@
+Dialog Semiconductor DA9150 Charger Power Supply bindings
+
+Required properties:
+- compatible: "dlg,da9150-charger" for DA9150 Charger Power Supply
+
+Optional properties:
+- io-channels: List of phandle and IIO specifier pairs
+- io-channel-names: List of channel names used by charger
+      ["CHAN_IBUS", "CHAN_VBUS", "CHAN_TJUNC", "CHAN_VBAT"]
+  (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info)
+
+
+Example:
+
+	da9150-charger {
+		compatible = "dlg,da9150-charger";
+
+		io-channels = <&gpadc 0>,
+			      <&gpadc 2>,
+			      <&gpadc 8>,
+			      <&gpadc 5>;
+		io-channel-names = "CHAN_IBUS",
+				   "CHAN_VBUS",
+				   "CHAN_TJUNC",
+				   "CHAN_VBAT";
+	};
diff --git a/dts/Bindings/power/supply/da9150-fg.txt b/dts/Bindings/power/supply/da9150-fg.txt
new file mode 100644
index 0000000000..00236fe3ea
--- /dev/null
+++ b/dts/Bindings/power/supply/da9150-fg.txt
@@ -0,0 +1,23 @@
+Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+Required properties:
+- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply
+
+Optional properties:
+- dlg,update-interval: Interval time (milliseconds) between battery level checks.
+- dlg,warn-soc-level: Battery discharge level (%) where warning event raised.
+      [1 - 100]
+- dlg,crit-soc-level: Battery discharge level (%) where critical event raised.
+  This value should be lower than the warning level.
+      [1 - 100]
+
+
+Example:
+
+	fuel-gauge {
+		compatible = "dlg,da9150-fuel-gauge";
+
+		dlg,update-interval = <10000>;
+		dlg,warn-soc-level = /bits/ 8 <15>;
+		dlg,crit-soc-level = /bits/ 8 <5>;
+	};
diff --git a/dts/Bindings/power/supply/gpio-charger.txt b/dts/Bindings/power/supply/gpio-charger.txt
new file mode 100644
index 0000000000..adbb5dc5b6
--- /dev/null
+++ b/dts/Bindings/power/supply/gpio-charger.txt
@@ -0,0 +1,27 @@
+gpio-charger
+
+Required properties :
+ - compatible : "gpio-charger"
+ - gpios : GPIO indicating the charger presence.
+   See GPIO binding in bindings/gpio/gpio.txt .
+ - charger-type : power supply type, one of
+     unknown
+     battery
+     ups
+     mains
+     usb-sdp (USB standard downstream port)
+     usb-dcp (USB dedicated charging port)
+     usb-cdp (USB charging downstream port)
+     usb-aca (USB accessory charger adapter)
+
+Example:
+
+	usb_charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpf0 2 0 0 0>;
+	}
+
+	battery {
+		power-supplies = <&usb_charger>;
+	};
diff --git a/dts/Bindings/power/supply/isp1704.txt b/dts/Bindings/power/supply/isp1704.txt
new file mode 100644
index 0000000000..fa35969079
--- /dev/null
+++ b/dts/Bindings/power/supply/isp1704.txt
@@ -0,0 +1,17 @@
+Binding for NXP ISP1704 USB Charger Detection
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "nxp,isp1704"
+- nxp,enable-gpio: Should contain a phandle + gpio-specifier
+  to the GPIO pin connected to the chip's enable pin.
+- usb-phy: Should contain a phandle to the USB PHY
+  the ISP1704 is connected to.
+
+Example:
+
+isp1704 {
+	compatible = "nxp,isp1704";
+	nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+	usb-phy = <&usb2_phy>;
+};
diff --git a/dts/Bindings/power/supply/lp8727_charger.txt b/dts/Bindings/power/supply/lp8727_charger.txt
new file mode 100644
index 0000000000..2246bc5c87
--- /dev/null
+++ b/dts/Bindings/power/supply/lp8727_charger.txt
@@ -0,0 +1,44 @@
+Binding for TI/National Semiconductor LP8727 Charger
+
+Required properties:
+- compatible: "ti,lp8727"
+- reg: I2C slave address 27h
+
+Optional properties:
+- interrupt-parent: interrupt controller node (see interrupt binding[0])
+- interrupts: interrupt specifier (see interrupt binding[0])
+- debounce-ms: interrupt debounce time. (u32)
+
+AC and USB charging parameters
+- charger-type: "ac" or "usb" (string)
+- eoc-level: value of 'enum lp8727_eoc_level' (u8)
+- charging-current: value of 'enum lp8727_ichg' (u8)
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example)
+
+lp8727@27 {
+	compatible = "ti,lp8727";
+	reg = <0x27>;
+
+	/* GPIO 134 is used for LP8728 interrupt pin */
+	interrupt-parent = <&gpio5>; 	/* base = 128 */
+	interrupts = <6 0x2>;		/* offset = 6, falling edge type */
+
+	debounce-ms = <300>;
+
+	/* AC charger: 5% EOC and 500mA charging current */
+	ac {
+		charger-type = "ac";
+		eoc-level = /bits/ 8 <0>;
+		charging-current = /bits/ 8 <4>;
+	};
+
+	/* USB charger: 10% EOC and 400mA charging current */
+	usb {
+		charger-type = "usb";
+		eoc-level = /bits/ 8 <1>;
+		charging-current = /bits/ 8 <2>;
+	};
+};
diff --git a/dts/Bindings/power/supply/ltc2941.txt b/dts/Bindings/power/supply/ltc2941.txt
new file mode 100644
index 0000000000..ea42ae12d9
--- /dev/null
+++ b/dts/Bindings/power/supply/ltc2941.txt
@@ -0,0 +1,27 @@
+binding for LTC2941 and LTC2943 battery gauges
+
+Both the LTC2941 and LTC2943 measure battery capacity.
+The LTC2943 is compatible with the LTC2941, it adds voltage and
+temperature monitoring, and uses a slightly different conversion
+formula for the charge counter.
+
+Required properties:
+- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
+    type of I2C chip attached.
+- reg: The 7-bit I2C address.
+- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
+    negative value when the battery has been connected to the wrong end of the
+    resistor.
+- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
+    This determines the range and accuracy of the gauge. The value is programmed
+    into the chip only if it differs from the current setting. The setting is
+    lost when the battery is disconnected.
+
+Example from the Topic Miami Florida board:
+
+	fuelgauge: ltc2943@64 {
+		compatible = "ltc2943";
+		reg = <0x64>;
+		lltc,resistor-sense = <15>;
+		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+	};
diff --git a/dts/Bindings/power/supply/max17042_battery.txt b/dts/Bindings/power/supply/max17042_battery.txt
new file mode 100644
index 0000000000..3f3894aaee
--- /dev/null
+++ b/dts/Bindings/power/supply/max17042_battery.txt
@@ -0,0 +1,31 @@
+max17042_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17042"
+
+Optional properties :
+ - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
+                         (datasheet-recommended value is 10000).
+   Defining this property enables current-sense functionality.
+
+Optional threshold properties :
+ If skipped the condition won't be reported.
+ - maxim,cold-temp :      Temperature threshold to report battery
+                          as cold (in tenths of degree Celsius).
+ - maxim,over-heat-temp : Temperature threshold to report battery
+                          as over heated (in tenths of degree Celsius).
+ - maxim,dead-volt :      Voltage threshold to report battery
+                          as dead (in mV).
+ - maxim,over-volt :      Voltage threshold to report battery
+                          as over voltage (in mV).
+
+Example:
+
+	battery-charger@36 {
+		compatible = "maxim,max17042";
+		reg = <0x36>;
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4300>;
+	};
diff --git a/dts/Bindings/power/supply/max8925_batter.txt b/dts/Bindings/power/supply/max8925_batter.txt
new file mode 100644
index 0000000000..d7e3e0c0f7
--- /dev/null
+++ b/dts/Bindings/power/supply/max8925_batter.txt
@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+	charger {
+		batt-detect = <0>;
+		topoff-threshold = <1>;
+		fast-charge = <7>;
+		no-temp-support = <0>;
+		no-insert-detect = <0>;
+	};
diff --git a/dts/Bindings/power/supply/olpc_battery.txt b/dts/Bindings/power/supply/olpc_battery.txt
new file mode 100644
index 0000000000..c8901b3992
--- /dev/null
+++ b/dts/Bindings/power/supply/olpc_battery.txt
@@ -0,0 +1,5 @@
+OLPC battery
+~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "olpc,xo1-battery"
diff --git a/dts/Bindings/power/supply/power_supply.txt b/dts/Bindings/power/supply/power_supply.txt
new file mode 100644
index 0000000000..8391bfa0ed
--- /dev/null
+++ b/dts/Bindings/power/supply/power_supply.txt
@@ -0,0 +1,23 @@
+Power Supply Core Support
+
+Optional Properties:
+ - power-supplies : This property is added to a supply in order to list the
+   devices which supply it power, referenced by their phandles.
+
+Example:
+
+	usb-charger: power@e {
+		compatible = "some,usb-charger";
+		...
+	};
+
+	ac-charger: power@c {
+		compatible = "some,ac-charger";
+		...
+	};
+
+	battery@b {
+		compatible = "some,battery";
+		...
+		power-supplies = <&usb-charger>, <&ac-charger>;
+	};
diff --git a/dts/Bindings/power/supply/qcom,coincell-charger.txt b/dts/Bindings/power/supply/qcom,coincell-charger.txt
new file mode 100644
index 0000000000..7478992232
--- /dev/null
+++ b/dts/Bindings/power/supply/qcom,coincell-charger.txt
@@ -0,0 +1,48 @@
+Qualcomm Coincell Charger:
+
+The hardware block controls charging for a coincell or capacitor that is
+used to provide power backup for certain features of the power management
+IC (PMIC)
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be: "qcom,pm8941-coincell"
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: base address of the coincell charger registers
+
+- qcom,rset-ohms:
+	Usage: required
+	Value type: <u32>
+	Definition: resistance (in ohms) for current-limiting resistor
+		must be one of: 800, 1200, 1700, 2100
+
+- qcom,vset-millivolts:
+	Usage: required
+	Value type: <u32>
+	Definition: voltage (in millivolts) to apply for charging
+		must be one of: 2500, 3000, 3100, 3200
+
+- qcom,charger-disable:
+	Usage: optional
+	Value type: <boolean>
+	Definition: defining this property disables charging
+
+This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
+as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
+../mfd/qcom-pm8xxx.txt
+
+Example:
+
+	pm8941@0 {
+		coincell@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};
diff --git a/dts/Bindings/power/supply/qcom_smbb.txt b/dts/Bindings/power/supply/qcom_smbb.txt
new file mode 100644
index 0000000000..65b88fac85
--- /dev/null
+++ b/dts/Bindings/power/supply/qcom_smbb.txt
@@ -0,0 +1,131 @@
+Qualcomm Switch-Mode Battery Charger and Boost
+
+PROPERTIES
+- compatible:
+  Usage: required
+  Value type: <stringlist>
+  Description: Must be one of:
+               - "qcom,pm8941-charger"
+
+- reg:
+  Usage: required
+  Value type: <prop-encoded-array>
+  Description: Base address of registers for SMBB block
+
+- interrupts:
+  Usage: required
+  Value type: <prop-encoded-array>
+  Description: The format of the specifier is defined by the binding document
+               describing the node's interrupt parent.  Must contain one
+               specifier for each of the following interrupts, in order:
+               - charge done
+               - charge fast mode
+               - charge trickle mode
+               - battery temperature ok
+               - battery present
+               - charger disconnected
+               - USB-in valid
+               - DC-in valid
+
+- interrupt-names:
+  Usage: required
+  Value type: <stringlist>
+  Description: Must contain the following list, strictly ordered:
+               "chg-done",
+               "chg-fast",
+               "chg-trkl",
+               "bat-temp-ok",
+               "bat-present",
+               "chg-gone",
+               "usb-valid",
+               "dc-valid"
+
+- qcom,fast-charge-current-limit:
+  Usage: optional (default: 1A, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 3A]
+  Description: Maximum charge current; May be clamped to safety limits.
+
+- qcom,fast-charge-low-threshold-voltage:
+  Usage: optional (default: 3.2V, or pre-configured value)
+  Value type: <u32>; uV; range [2.1V : 3.6V]
+  Description: Battery voltage limit above which fast charging may operate;
+               Below this value linear or switch-mode auto-trickle-charging
+               will operate.
+
+- qcom,fast-charge-high-threshold-voltage:
+  Usage: optional (default: 4.2V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Battery voltage limit below which fast charging may operate;
+               The fast charger will attempt to charge the battery to this
+               voltage.  May be clamped to safety limits.
+
+- qcom,fast-charge-safe-voltage:
+  Usage: optional (default: 4.2V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Maximum safe battery voltage; May be pre-set by bootloader, in
+               which case, setting this will harmlessly fail. The property
+               'fast-charge-high-watermark' will be clamped by this value.
+
+- qcom,fast-charge-safe-current:
+  Usage: optional (default: 1A, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 3A]
+  Description: Maximum safe battery charge current; May pre-set by bootloader,
+               in which case, setting this will harmlessly fail. The property
+               'qcom,fast-charge-current-limit' will be clamped by this value.
+
+- qcom,auto-recharge-threshold-voltage:
+  Usage: optional (default: 4.1V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Battery voltage limit below which auto-recharge functionality
+               will restart charging after end-of-charge;  The high cutoff
+               limit for auto-recharge is 5% above this value.
+
+- qcom,minimum-input-voltage:
+  Usage: optional (default: 4.3V, or pre-configured value)
+  Value type: <u32>; uV; range [4.2V : 9.6V]
+  Description: Input voltage level above which charging may operate
+
+- qcom,dc-current-limit:
+  Usage: optional (default: 100mA, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 2.5A]
+  Description: Default DC charge current limit
+
+- qcom,disable-dc:
+  Usage: optional (default: false)
+  Value type: boolean: <u32> or <empty>
+  Description: Disable DC charger
+
+- qcom,jeita-extended-temp-range:
+  Usage: optional (default: false)
+  Value type: boolean: <u32> or <empty>
+  Description: Enable JEITA extended temperature range;  This does *not*
+               adjust the maximum charge voltage or current in the extended
+               temperature range.  It only allows charging when the battery
+               is in the extended temperature range.  Voltage/current
+               regulation must be done externally to fully comply with
+               the JEITA safety guidelines if this flag is set.
+
+EXAMPLE
+charger@1000 {
+       compatible = "qcom,pm8941-charger";
+       reg = <0x1000 0x700>;
+       interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+       interrupt-names = "chg-done",
+                       "chg-fast",
+                       "chg-trkl",
+                       "bat-temp-ok",
+                       "bat-present",
+                       "chg-gone",
+                       "usb-valid",
+                       "dc-valid";
+
+       qcom,fast-charge-current-limit = <1000000>;
+       qcom,dc-charge-current-limit = <1000000>;
+};
diff --git a/dts/Bindings/power/supply/rt9455_charger.txt b/dts/Bindings/power/supply/rt9455_charger.txt
new file mode 100644
index 0000000000..5d9ad5cf2c
--- /dev/null
+++ b/dts/Bindings/power/supply/rt9455_charger.txt
@@ -0,0 +1,48 @@
+Binding for Richtek rt9455 battery charger
+
+Required properties:
+- compatible:				it should contain one of the following:
+					"richtek,rt9455".
+- reg:					integer, i2c address of the device.
+- interrupt-parent:			the phandle for the interrupt controller that
+					services interrupts for this device.
+- interrupts:				interrupt mapping for GPIO IRQ, it should be
+					configured with IRQ_TYPE_LEVEL_LOW flag.
+- richtek,output-charge-current:	integer, output current from the charger to the
+					battery, in uA.
+- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
+					When the current in constant-voltage phase drops
+					below output_charge_current x end-of-charge-percentage,
+					charge is terminated.
+- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
+- richtek,boost-output-voltage:		integer, maximum voltage provided to consumer
+					devices, when the charger is in boost mode, in uV.
+
+Optional properties:
+- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to
+					decrease voltage level when the over current
+					of the input power source occurs.
+					This prevents input voltage drop due to insufficient
+					current provided by the power source.
+					Default: 4500000 uV (4.5V)
+- richtek,avg-input-current-regulation: integer, input current value in uA drained by the
+					charger from the power source.
+					Default: 500000 uA (500mA)
+
+Example:
+
+rt9455@22 {
+	compatible = "richtek,rt9455";
+	reg = <0x22>;
+
+	interrupt-parent = <&gpio1>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+	richtek,output-charge-current	    = <500000>;
+	richtek,end-of-charge-percentage    = <10>;
+	richtek,battery-regulation-voltage  = <4200000>;
+	richtek,boost-output-voltage	    = <5050000>;
+
+	richtek,min-input-voltage-regulation = <4500000>;
+	richtek,avg-input-current-regulation = <500000>;
+};
diff --git a/dts/Bindings/power/supply/rx51-battery.txt b/dts/Bindings/power/supply/rx51-battery.txt
new file mode 100644
index 0000000000..90438453db
--- /dev/null
+++ b/dts/Bindings/power/supply/rx51-battery.txt
@@ -0,0 +1,25 @@
+Binding for Nokia N900 battery
+
+The Nokia N900 battery status can be read via the TWL4030's A/D converter.
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "nokia,n900-battery"
+- io-channels: Should contain IIO channel specifiers
+               for each element in io-channel-names.
+- io-channel-names: Should contain the following values:
+ * "temp" - The ADC channel for temperature reading
+ * "bsi"  - The ADC channel for battery size identification
+ * "vbat" - The ADC channel to measure the battery voltage
+
+Example from Nokia N900:
+
+battery: n900-battery {
+	compatible = "nokia,n900-battery";
+	io-channels = <&twl4030_madc 0>,
+		      <&twl4030_madc 4>,
+		      <&twl4030_madc 12>;
+	io-channel-names = "temp",
+			   "bsi",
+			   "vbat";
+};
diff --git a/dts/Bindings/power/supply/sbs_sbs-battery.txt b/dts/Bindings/power/supply/sbs_sbs-battery.txt
new file mode 100644
index 0000000000..c40e8926fa
--- /dev/null
+++ b/dts/Bindings/power/supply/sbs_sbs-battery.txt
@@ -0,0 +1,23 @@
+SBS sbs-battery
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-battery"
+
+Optional properties :
+ - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
+   IO failure.
+ - sbs,poll-retry-count : The number of times to try looking for new status
+   after an external change notification.
+ - sbs,battery-detect-gpios : The gpio which signals battery detection and
+   a flag specifying its polarity.
+
+Example:
+
+	bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = < 0xb >;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <10>;
+		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+	}
diff --git a/dts/Bindings/power/supply/ti,bq24735.txt b/dts/Bindings/power/supply/ti,bq24735.txt
new file mode 100644
index 0000000000..3bf55757ce
--- /dev/null
+++ b/dts/Bindings/power/supply/ti,bq24735.txt
@@ -0,0 +1,35 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+   adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+   presence. This is a Host GPIO that is configured as an input and
+   connected to the bq24735.
+ - ti,charge-current : Used to control and set the charging current. This value
+   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
+   about the ChargeCurrent (0x14h) register.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
+   about the ChargeVoltage (0x15h) register.
+ - ti,input-current : Used to control and set the charger input current. This
+   value must be between 128mA and 8.064A with a 128mA step resolution. The
+   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
+   more information about the InputCurrent (0x3fh) register.
+ - ti,external-control : Indicates that the charger is configured externally
+   and that the host should not attempt to enable/disable charging or set the
+   charge voltage/current.
+
+Example:
+
+	bq24735@9 {
+		compatible = "ti,bq24735";
+		reg = <0x9>;
+		ti,ac-detect-gpios = <&gpio 72 0x1>;
+	}
diff --git a/dts/Bindings/power/supply/tps65090.txt b/dts/Bindings/power/supply/tps65090.txt
new file mode 100644
index 0000000000..8e5e0d3910
--- /dev/null
+++ b/dts/Bindings/power/supply/tps65090.txt
@@ -0,0 +1,17 @@
+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+	tps65090-charger {
+		compatible = "ti,tps65090-charger";
+		ti,enable-low-current-chrg;
+	};
diff --git a/dts/Bindings/power/supply/tps65217_charger.txt b/dts/Bindings/power/supply/tps65217_charger.txt
new file mode 100644
index 0000000000..98d131acee
--- /dev/null
+++ b/dts/Bindings/power/supply/tps65217_charger.txt
@@ -0,0 +1,12 @@
+TPS65217 Charger
+
+Required Properties:
+-compatible: "ti,tps65217-charger"
+
+This node is a subnode of the tps65217 PMIC.
+
+Example:
+
+	tps65217-charger {
+		compatible = "ti,tps65090-charger";
+	};
diff --git a/dts/Bindings/power/supply/twl-charger.txt b/dts/Bindings/power/supply/twl-charger.txt
new file mode 100644
index 0000000000..3b4ea1b73b
--- /dev/null
+++ b/dts/Bindings/power/supply/twl-charger.txt
@@ -0,0 +1,30 @@
+TWL BCI (Battery Charger Interface)
+
+The battery charger needs to interact with the USB phy in order
+to know when charging is permissible, and when there is a connection
+or disconnection.
+
+The choice of phy cannot be configured at a hardware level, so there
+is no value in explicit configuration in device-tree.  Rather
+if there is a sibling of the BCI node which is compatible with
+"ti,twl4030-usb", then that is used to determine when and how
+use USB power for charging.
+
+Required properties:
+- compatible:
+  - "ti,twl4030-bci"
+- interrupts: two interrupt lines from the TWL SIH (secondary
+  interrupt handler) - interrupts 9 and 2.
+
+Optional properties:
+- ti,bb-uvolt: microvolts for charging the backup battery.
+- ti,bb-uamp: microamps for charging the backup battery.
+
+Examples:
+
+bci {
+   compatible = "ti,twl4030-bci";
+   interrupts = <9>, <2>;
+   ti,bb-uvolt = <3200000>;
+   ti,bb-uamp = <150>;
+};