dts: update to v4.17-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 23 insertions, 4 deletions

diff --git a/dts/Bindings/power/renesas,rcar-sysc.txt b/dts/Bindings/power/renesas,rcar-sysc.txt
index 8690f10426..ab399e5592 100644
--- a/dts/Bindings/power/renesas,rcar-sysc.txt
+++ b/dts/Bindings/power/renesas,rcar-sysc.txt
@@ -17,7 +17,9 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
+      - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/dts/Bindings/power/reset/gpio-poweroff.txt b/dts/Bindings/power/reset/gpio-poweroff.txt
index e62d53d844..6d8980c18c 100644
--- a/dts/Bindings/power/reset/gpio-poweroff.txt
+++ b/dts/Bindings/power/reset/gpio-poweroff.txt
@@ -27,10 +27,13 @@ Optional properties:
   it to an output when the power-off handler is called. If this optional
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
+- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
+              specified, 3000 ms is used.
 
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
 	gpios = <&gpio 4 0>;
+	timeout-ms = <3000>;
 };
diff --git a/dts/Bindings/power/reset/ocelot-reset.txt b/dts/Bindings/power/reset/ocelot-reset.txt
new file mode 100644
index 0000000000..1b4213eb34
--- /dev/null
+++ b/dts/Bindings/power/reset/ocelot-reset.txt
@@ -0,0 +1,14 @@
+Microsemi Ocelot reset controller
+
+The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
+SoC MIPS core.
+
+Required Properties:
+ - compatible: "mscc,ocelot-chip-reset"
+
+Example:
+	reset@1070008 {
+		compatible = "mscc,ocelot-chip-reset";
+		reg = <0x1070008 0x4>;
+	};
+
diff --git a/dts/Bindings/power/supply/axp20x_battery.txt b/dts/Bindings/power/supply/axp20x_battery.txt
index c24886676a..41916f6990 100644
--- a/dts/Bindings/power/supply/axp20x_battery.txt
+++ b/dts/Bindings/power/supply/axp20x_battery.txt
@@ -4,12 +4,12 @@ Required Properties:
  - compatible, one of:
 			"x-powers,axp209-battery-power-supply"
 			"x-powers,axp221-battery-power-supply"
+			"x-powers,axp813-battery-power-supply"
 
-This node is a subnode of the axp20x/axp22x PMIC.
+This node is a subnode of its respective PMIC DT node.
 
-The AXP20X and AXP22X can read the battery voltage, charge and discharge
-currents of the battery by reading ADC channels from the AXP20X/AXP22X
-ADC.
+The supported devices can read the battery voltage, charge and discharge
+currents of the battery by reading ADC channels from the ADC.
 
 Example: