dts: update to v5.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

16 files changed, 345 insertions, 140 deletions

diff --git a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml
index 5dae04d293..7657721a4e 100644
--- a/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/dts/Bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -12,13 +12,14 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
   compatible:
     enum:
       - amlogic,meson-a1-pwrc
+      - amlogic,meson-s4-pwrc
 
   "#power-domain-cells":
     const: 1
diff --git a/dts/Bindings/power/avs/qcom,cpr.txt b/dts/Bindings/power/avs/qcom,cpr.txt
deleted file mode 100644
index ab0d5ebbad..0000000000
--- a/dts/Bindings/power/avs/qcom,cpr.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the rbcpr register region
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the CPR interrupt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: phandle to the reference clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ref"
-
-- vdd-apc-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: should be 0
-
-- operating-points-v2:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the OPP table containing the
-		    performance states supported by the CPR
-		    power domain
-
-- acc-syscon:
-	Usage: optional
-	Value type: <phandle>
-	Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to nvmem cells containing the data
-		    that makes up a fuse corner, for each fuse corner.
-		    As well as the CPR fuse revision.
-
-- nvmem-cell-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
-		    "cpr_quotient_offset3", "cpr_init_voltage1",
-		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
-		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
-		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
-		    for qcs404.
-
-Example:
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xo_board>;
-		clock-names = "ref";
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		acc-syscon = <&tcsr>;
-
-		nvmem-cells = <&cpr_efuse_quot_offset1>,
-			<&cpr_efuse_quot_offset2>,
-			<&cpr_efuse_quot_offset3>,
-			<&cpr_efuse_init_voltage1>,
-			<&cpr_efuse_init_voltage2>,
-			<&cpr_efuse_init_voltage3>,
-			<&cpr_efuse_quot1>,
-			<&cpr_efuse_quot2>,
-			<&cpr_efuse_quot3>,
-			<&cpr_efuse_ring1>,
-			<&cpr_efuse_ring2>,
-			<&cpr_efuse_ring3>,
-			<&cpr_efuse_revision>;
-		nvmem-cell-names = "cpr_quotient_offset1",
-			"cpr_quotient_offset2",
-			"cpr_quotient_offset3",
-			"cpr_init_voltage1",
-			"cpr_init_voltage2",
-			"cpr_init_voltage3",
-			"cpr_quotient1",
-			"cpr_quotient2",
-			"cpr_quotient3",
-			"cpr_ring_osc1",
-			"cpr_ring_osc2",
-			"cpr_ring_osc3",
-			"cpr_fuse_revision";
-	};
diff --git a/dts/Bindings/power/avs/qcom,cpr.yaml b/dts/Bindings/power/avs/qcom,cpr.yaml
new file mode 100644
index 0000000000..3301fa0c26
--- /dev/null
+++ b/dts/Bindings/power/avs/qcom,cpr.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR) bindings
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock.
+
+  clock-names:
+    items:
+      - const: ref
+
+  vdd-apc-supply:
+    description: APC regulator supply.
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2:
+    description: |
+      A phandle to the OPP table containing the performance states
+      supported by the CPR power domain.
+
+  acc-syscon:
+    description: A phandle to the syscon used for writing ACC settings.
+
+  nvmem-cells:
+    items:
+      - description: Corner 1 quotient offset
+      - description: Corner 2 quotient offset
+      - description: Corner 3 quotient offset
+      - description: Corner 1 initial voltage
+      - description: Corner 2 initial voltage
+      - description: Corner 3 initial voltage
+      - description: Corner 1 quotient
+      - description: Corner 2 quotient
+      - description: Corner 3 quotient
+      - description: Corner 1 ring oscillator
+      - description: Corner 2 ring oscillator
+      - description: Corner 3 ring oscillator
+      - description: Fuse revision
+
+  nvmem-cell-names:
+    items:
+      - const: cpr_quotient_offset1
+      - const: cpr_quotient_offset2
+      - const: cpr_quotient_offset3
+      - const: cpr_init_voltage1
+      - const: cpr_init_voltage2
+      - const: cpr_init_voltage3
+      - const: cpr_quotient1
+      - const: cpr_quotient2
+      - const: cpr_quotient3
+      - const: cpr_ring_osc1
+      - const: cpr_ring_osc2
+      - const: cpr_ring_osc3
+      - const: cpr_fuse_revision
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdd-apc-supply
+  - '#power-domain-cells'
+  - operating-points-v2
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+            <&cpr_efuse_quot_offset2>,
+            <&cpr_efuse_quot_offset3>,
+            <&cpr_efuse_init_voltage1>,
+            <&cpr_efuse_init_voltage2>,
+            <&cpr_efuse_init_voltage3>,
+            <&cpr_efuse_quot1>,
+            <&cpr_efuse_quot2>,
+            <&cpr_efuse_quot3>,
+            <&cpr_efuse_ring1>,
+            <&cpr_efuse_ring2>,
+            <&cpr_efuse_ring3>,
+            <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr_quotient_offset1",
+            "cpr_quotient_offset2",
+            "cpr_quotient_offset3",
+            "cpr_init_voltage1",
+            "cpr_init_voltage2",
+            "cpr_init_voltage3",
+            "cpr_quotient1",
+            "cpr_quotient2",
+            "cpr_quotient3",
+            "cpr_ring_osc1",
+            "cpr_ring_osc2",
+            "cpr_ring_osc3",
+            "cpr_fuse_revision";
+    };
diff --git a/dts/Bindings/power/fsl,imx-gpcv2.yaml b/dts/Bindings/power/fsl,imx-gpcv2.yaml
index 01bdda167e..747622bdc5 100644
--- a/dts/Bindings/power/fsl,imx-gpcv2.yaml
+++ b/dts/Bindings/power/fsl,imx-gpcv2.yaml
@@ -28,6 +28,7 @@ properties:
       - fsl,imx8mn-gpc
       - fsl,imx8mq-gpc
       - fsl,imx8mm-gpc
+      - fsl,imx8mp-gpc
 
   reg:
     maxItems: 1
@@ -57,6 +58,7 @@ properties:
               include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
               include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
               include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
+              include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
             maxItems: 1
 
           clocks:
diff --git a/dts/Bindings/power/mediatek,power-controller.yaml b/dts/Bindings/power/mediatek,power-controller.yaml
index f234a756c1..135c6f7220 100644
--- a/dts/Bindings/power/mediatek,power-controller.yaml
+++ b/dts/Bindings/power/mediatek,power-controller.yaml
@@ -26,7 +26,9 @@ properties:
       - mediatek,mt8167-power-controller
       - mediatek,mt8173-power-controller
       - mediatek,mt8183-power-controller
+      - mediatek,mt8186-power-controller
       - mediatek,mt8192-power-controller
+      - mediatek,mt8195-power-controller
 
   '#power-domain-cells':
     const: 1
@@ -64,6 +66,7 @@ patternProperties:
               "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
               "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
               "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
+              "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
         maxItems: 1
 
       clocks:
diff --git a/dts/Bindings/power/power-domain.yaml b/dts/Bindings/power/power-domain.yaml
index 3143ed9a33..889091b981 100644
--- a/dts/Bindings/power/power-domain.yaml
+++ b/dts/Bindings/power/power-domain.yaml
@@ -29,6 +29,8 @@ properties:
 
   domain-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Phandles of idle states that defines the available states for the
       power-domain provider. The idle state definitions are compatible with the
@@ -42,6 +44,8 @@ properties:
 
   operating-points-v2:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml
index f48bc41d81..940e97b565 100644
--- a/dts/Bindings/power/qcom,rpmpd.yaml
+++ b/dts/Bindings/power/qcom,rpmpd.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - qcom,mdm9607-rpmpd
+      - qcom,msm8226-rpmpd
       - qcom,msm8916-rpmpd
       - qcom,msm8939-rpmpd
       - qcom,msm8953-rpmpd
diff --git a/dts/Bindings/power/renesas,apmu.yaml b/dts/Bindings/power/renesas,apmu.yaml
index 391897d897..4d293b2b2f 100644
--- a/dts/Bindings/power/renesas,apmu.yaml
+++ b/dts/Bindings/power/renesas,apmu.yaml
@@ -35,6 +35,8 @@ properties:
 
   cpus:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Array of phandles pointing to CPU cores, which should match the order of
       CPU cores used by the WUPCR and PSTR registers in the Advanced Power
diff --git a/dts/Bindings/power/renesas,rzg2l-sysc.yaml b/dts/Bindings/power/renesas,rzg2l-sysc.yaml
index 84ddc772b0..bb433e75a0 100644
--- a/dts/Bindings/power/renesas,rzg2l-sysc.yaml
+++ b/dts/Bindings/power/renesas,rzg2l-sysc.yaml
@@ -4,14 +4,14 @@
 $id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/G2L System Controller (SYSC)
+title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description:
-  The RZ/G2L System Controller (SYSC) performs system control of the LSI and
-  supports following functions,
+  The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI
+  and supports following functions,
   - External terminal state capture function
   - 34-bit address space access function
   - Low power consumption control
@@ -21,6 +21,7 @@ properties:
   compatible:
     enum:
       - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+      - renesas,r9a07g054-sysc # RZ/V2L
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/power/rockchip,power-controller.yaml b/dts/Bindings/power/rockchip,power-controller.yaml
index 9b9d710874..3deb0fc8df 100644
--- a/dts/Bindings/power/rockchip,power-controller.yaml
+++ b/dts/Bindings/power/rockchip,power-controller.yaml
@@ -129,6 +129,8 @@ $defs:
 
       pm_qos:
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
         description: |
           A number of phandles to qos blocks which need to be saved and restored
           while power domain switches state.
diff --git a/dts/Bindings/power/supply/cw2015_battery.yaml b/dts/Bindings/power/supply/cw2015_battery.yaml
index c73abb2ff5..2dda91587d 100644
--- a/dts/Bindings/power/supply/cw2015_battery.yaml
+++ b/dts/Bindings/power/supply/cw2015_battery.yaml
@@ -14,6 +14,9 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
+allOf:
+  - $ref: power-supply.yaml#
+
 properties:
   compatible:
     const: cellwise,cw2015
@@ -37,9 +40,6 @@ properties:
     minimum: 250
 
   power-supplies:
-    description:
-      Specifies supplies used for charging the battery connected to this gauge
-    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8 # Should be enough
 
diff --git a/dts/Bindings/power/supply/maxim,max14577.yaml b/dts/Bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 0000000000..3978b48299
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
diff --git a/dts/Bindings/power/supply/maxim,max77693.yaml b/dts/Bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 0000000000..a21dc1a889
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/dts/Bindings/power/supply/power-supply.yaml b/dts/Bindings/power/supply/power-supply.yaml
index 2597601677..531b67225c 100644
--- a/dts/Bindings/power/supply/power-supply.yaml
+++ b/dts/Bindings/power/supply/power-supply.yaml
@@ -12,6 +12,8 @@ maintainers:
 properties:
   power-supplies:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
diff --git a/dts/Bindings/power/supply/sbs,sbs-manager.yaml b/dts/Bindings/power/supply/sbs,sbs-manager.yaml
index 72e8f274c7..99f506d6b0 100644
--- a/dts/Bindings/power/supply/sbs,sbs-manager.yaml
+++ b/dts/Bindings/power/supply/sbs,sbs-manager.yaml
@@ -46,9 +46,7 @@ additionalProperties: false
 patternProperties:
   "^i2c@[1-4]$":
     type: object
-
-    allOf:
-      - $ref: /schemas/i2c/i2c-controller.yaml#
+    $ref: /schemas/i2c/i2c-controller.yaml#
 
 examples:
   - |
diff --git a/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml b/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml
index 54ac42a9d3..2ce408a7c0 100644
--- a/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml
+++ b/dts/Bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -25,6 +25,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     deprecated: true
 
+  line-impedance-micro-ohms:
+    description: The line impedance between the battery and the
+      AB8500 inputs, to compensate for this when determining internal
+      resistance.
+
   interrupts:
     maxItems: 5