summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pwm
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-04-25 11:22:32 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-04-28 09:08:46 +0200
commit00ce25c6dcdae5582ae4be37147ab33678adc995 (patch)
tree41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/pwm
parent0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff)
downloadbarebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz
barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pwm')
-rw-r--r--dts/Bindings/pwm/atmel-pwm.txt33
-rw-r--r--dts/Bindings/pwm/atmel-tcb-pwm.txt16
-rw-r--r--dts/Bindings/pwm/cirrus,clps711x-pwm.txt16
-rw-r--r--dts/Bindings/pwm/imx-pwm.txt17
-rw-r--r--dts/Bindings/pwm/lpc32xx-pwm.txt12
-rw-r--r--dts/Bindings/pwm/mxs-pwm.txt17
-rw-r--r--dts/Bindings/pwm/nvidia,tegra20-pwm.txt26
-rw-r--r--dts/Bindings/pwm/nxp,pca9685-pwm.txt27
-rw-r--r--dts/Bindings/pwm/pwm-fsl-ftm.txt35
-rw-r--r--dts/Bindings/pwm/pwm-lp3943.txt58
-rw-r--r--dts/Bindings/pwm/pwm-samsung.txt51
-rw-r--r--dts/Bindings/pwm/pwm-tiecap.txt29
-rw-r--r--dts/Bindings/pwm/pwm-tiehrpwm.txt29
-rw-r--r--dts/Bindings/pwm/pwm-tipwmss.txt31
-rw-r--r--dts/Bindings/pwm/pwm.txt69
-rw-r--r--dts/Bindings/pwm/pxa-pwm.txt30
-rw-r--r--dts/Bindings/pwm/renesas,tpu-pwm.txt28
-rw-r--r--dts/Bindings/pwm/spear-pwm.txt17
-rw-r--r--dts/Bindings/pwm/ti,twl-pwm.txt17
-rw-r--r--dts/Bindings/pwm/ti,twl-pwmled.txt17
-rw-r--r--dts/Bindings/pwm/vt8500-pwm.txt18
21 files changed, 593 insertions, 0 deletions
diff --git a/dts/Bindings/pwm/atmel-pwm.txt b/dts/Bindings/pwm/atmel-pwm.txt
new file mode 100644
index 000000000..02331b904
--- /dev/null
+++ b/dts/Bindings/pwm/atmel-pwm.txt
@@ -0,0 +1,33 @@
+Atmel PWM controller
+
+Required properties:
+ - compatible: should be one of:
+ - "atmel,at91sam9rl-pwm"
+ - "atmel,sama5d3-pwm"
+ - reg: physical base address and length of the controller's registers
+ - #pwm-cells: Should be 3. See pwm.txt in this directory for a
+ description of the cells format.
+
+Example:
+
+ pwm0: pwm@f8034000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xf8034000 0x400>;
+ #pwm-cells = <3>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ d1 {
+ label = "d1";
+ pwms = <&pwm0 3 5000 0>
+ max-brightness = <255>;
+ };
+
+ d2 {
+ label = "d2";
+ pwms = <&pwm0 1 5000 1>
+ max-brightness = <255>;
+ };
+ };
diff --git a/dts/Bindings/pwm/atmel-tcb-pwm.txt b/dts/Bindings/pwm/atmel-tcb-pwm.txt
new file mode 100644
index 000000000..8031148bc
--- /dev/null
+++ b/dts/Bindings/pwm/atmel-tcb-pwm.txt
@@ -0,0 +1,16 @@
+Atmel TCB PWM controller
+
+Required properties:
+- compatible: should be "atmel,tcb-pwm"
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+- tc-block: The Timer Counter block to use as a PWM chip.
+
+Example:
+
+pwm {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ tc-block = <1>;
+};
diff --git a/dts/Bindings/pwm/cirrus,clps711x-pwm.txt b/dts/Bindings/pwm/cirrus,clps711x-pwm.txt
new file mode 100644
index 000000000..a183db48f
--- /dev/null
+++ b/dts/Bindings/pwm/cirrus,clps711x-pwm.txt
@@ -0,0 +1,16 @@
+* Cirris Logic CLPS711X PWM controller
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-pwm".
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle + clock specifier pair of the PWM reference clock.
+- #pwm-cells: Should be 1. The cell specifies the index of the channel.
+
+Example:
+ pwm: pwm@80000400 {
+ compatible = "cirrus,ep7312-pwm",
+ "cirrus,clps711x-pwm";
+ reg = <0x80000400 0x4>;
+ clocks = <&clks 8>;
+ #pwm-cells = <1>;
+ };
diff --git a/dts/Bindings/pwm/imx-pwm.txt b/dts/Bindings/pwm/imx-pwm.txt
new file mode 100644
index 000000000..b50d7a6d9
--- /dev/null
+++ b/dts/Bindings/pwm/imx-pwm.txt
@@ -0,0 +1,17 @@
+Freescale i.MX PWM controller
+
+Required properties:
+- compatible: should be "fsl,<soc>-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+- interrupts: The interrupt for the pwm controller
+
+Example:
+
+pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <61>;
+};
diff --git a/dts/Bindings/pwm/lpc32xx-pwm.txt b/dts/Bindings/pwm/lpc32xx-pwm.txt
new file mode 100644
index 000000000..cfe1db3bb
--- /dev/null
+++ b/dts/Bindings/pwm/lpc32xx-pwm.txt
@@ -0,0 +1,12 @@
+LPC32XX PWM controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-pwm"
+- reg: physical base address and length of the controller's registers
+
+Examples:
+
+pwm@0x4005C000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C000 0x8>;
+};
diff --git a/dts/Bindings/pwm/mxs-pwm.txt b/dts/Bindings/pwm/mxs-pwm.txt
new file mode 100644
index 000000000..96cdde5f6
--- /dev/null
+++ b/dts/Bindings/pwm/mxs-pwm.txt
@@ -0,0 +1,17 @@
+Freescale MXS PWM controller
+
+Required properties:
+- compatible: should be "fsl,imx23-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+- fsl,pwm-number: the number of PWM devices
+
+Example:
+
+pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 0x2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
+};
diff --git a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
new file mode 100644
index 000000000..c7ea9d4a9
--- /dev/null
+++ b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
@@ -0,0 +1,26 @@
+Tegra SoC PWFM controller
+
+Required properties:
+- compatible: should be one of:
+ - "nvidia,tegra20-pwm"
+ - "nvidia,tegra30-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - pwm
+
+Example:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car 17>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
+ };
diff --git a/dts/Bindings/pwm/nxp,pca9685-pwm.txt b/dts/Bindings/pwm/nxp,pca9685-pwm.txt
new file mode 100644
index 000000000..f84ec9d29
--- /dev/null
+++ b/dts/Bindings/pwm/nxp,pca9685-pwm.txt
@@ -0,0 +1,27 @@
+NXP PCA9685 16-channel 12-bit PWM LED controller
+================================================
+
+Required properties:
+ - compatible: "nxp,pca9685-pwm"
+ - #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+ The index 16 is the ALLCALL channel, that sets all PWM channels at the same
+ time.
+
+Optional properties:
+ - invert (bool): boolean to enable inverted logic
+ - open-drain (bool): boolean to configure outputs with open-drain structure;
+ if omitted use totem-pole structure
+
+Example:
+
+For LEDs that are directly connected to the PCA, the following setting is
+applicable:
+
+pca: pca@41 {
+ compatible = "nxp,pca9685-pwm";
+ #pwm-cells = <2>;
+ reg = <0x41>;
+ invert;
+ open-drain;
+};
diff --git a/dts/Bindings/pwm/pwm-fsl-ftm.txt b/dts/Bindings/pwm/pwm-fsl-ftm.txt
new file mode 100644
index 000000000..0bda229a6
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-fsl-ftm.txt
@@ -0,0 +1,35 @@
+Freescale FlexTimer Module (FTM) PWM controller
+
+Required properties:
+- compatible: Should be "fsl,vf610-ftm-pwm".
+- reg: Physical base address and length of the controller's registers
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+ the cells format.
+- clock-names: Should include the following module clock source entries:
+ "ftm_sys" (module clock, also can be used as counter clock),
+ "ftm_ext" (external counter clock),
+ "ftm_fix" (fixed counter clock),
+ "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
+- clocks: Must contain a phandle and clock specifier for each entry in
+ clock-names, please see clock/clock-bindings.txt for details of the property
+ values.
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+ See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+
+Example:
+
+pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x40038000 0x1000>;
+ #pwm-cells = <3>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_1>;
+};
diff --git a/dts/Bindings/pwm/pwm-lp3943.txt b/dts/Bindings/pwm/pwm-lp3943.txt
new file mode 100644
index 000000000..7bd9d3b12
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-lp3943.txt
@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+ - compatible: "ti,lp3943-pwm"
+ - #pwm-cells: Should be 2. See pwm.txt in this directory for a
+ description of the cells format.
+ Note that this hardware limits the period length to the
+ range 6250~1600000.
+ - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+ 0 = output 0
+ 1 = output 1
+ .
+ .
+ 15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+ lp3943@60 {
+ compatible = "ti,lp3943";
+ reg = <0x60>;
+
+ /*
+ * PWM 0 : output 8, 9 and 10
+ * PWM 1 : output 15
+ */
+ pwm3943: pwm {
+ compatible = "ti,lp3943-pwm";
+ #pwm-cells = <2>;
+ ti,pwm0 = <8 9 10>;
+ ti,pwm1 = <15>;
+ };
+ };
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+ compatible = "pwm-leds";
+ rgb {
+ label = "indi::rgb";
+ pwms = <&pwm3943 0 10000>;
+ max-brightness = <255>;
+ };
+};
+
+&i2c4 {
+ /* Backlight control with PWM 1 of LP3943 */
+ backlight@2c {
+ compatible = "ti,lp8557";
+ reg = <0x2c>;
+
+ pwms = <&pwm3943 1 10000>;
+ pwm-names = "lp8557";
+ };
+};
diff --git a/dts/Bindings/pwm/pwm-samsung.txt b/dts/Bindings/pwm/pwm-samsung.txt
new file mode 100644
index 000000000..5538de9c2
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-samsung.txt
@@ -0,0 +1,51 @@
+* Samsung PWM timers
+
+Samsung SoCs contain PWM timer blocks which can be used for system clock source
+and clock event timers, as well as to drive SoC outputs with PWM signal. Each
+PWM timer block provides 5 PWM channels (not all of them can drive physical
+outputs - see SoC and board manual).
+
+Be aware that the clocksource driver supports only uniprocessor systems.
+
+Required properties:
+- compatible : should be one of following:
+ samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
+ samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
+ samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
+ samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
+ Exynos4210 rev0 SoCs
+ samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
+ Exynos4x12, Exynos5250 and Exynos5420 SoCs
+- reg: base address and size of register area
+- interrupts: list of timer interrupts (one interrupt per timer, starting at
+ timer 0)
+- clock-names: should contain all following required clock names:
+ - "timers" - PWM base clock used to generate PWM signals,
+ and any subset of following optional clock names:
+ - "pwm-tclk0" - first external PWM clock source,
+ - "pwm-tclk1" - second external PWM clock source.
+ Note that not all IP variants allow using all external clock sources.
+ Refer to SoC documentation to learn which clock source configurations
+ are available.
+- clocks: should contain clock specifiers of all clocks, which input names
+ have been specified in clock-names property, in same order.
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+
+Optional properties:
+- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
+ platform - an array of up to 5 elements being indices of PWM channels
+ (from 0 to 4), the order does not matter.
+
+Example:
+ pwm@7f006000 {
+ compatible = "samsung,s3c6400-pwm";
+ reg = <0x7f006000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>, <24>, <25>, <27>, <28>;
+ clocks = <&clock 67>;
+ clock-names = "timers";
+ samsung,pwm-outputs = <0>, <1>;
+ #pwm-cells = <3>;
+ }
diff --git a/dts/Bindings/pwm/pwm-tiecap.txt b/dts/Bindings/pwm/pwm-tiecap.txt
new file mode 100644
index 000000000..fb81179dc
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-tiecap.txt
@@ -0,0 +1,29 @@
+TI SOC ECAP based APWM controller
+
+Required properties:
+- compatible: Must be "ti,<soc>-ecap".
+ for am33xx - compatible = "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The PWM channel index ranges from 0 to 4. The only third
+ cell flag supported by this binding is PWM_POLARITY_INVERTED.
+- reg: physical base address and size of the registers map.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the ECAP:
+ "ecap<x>", <x> being the 0-based instance number from the HW spec
+
+Example:
+
+ecap0: ecap@0 { /* ECAP on am33xx */
+ compatible = "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48300100 0x80>;
+ ti,hwmods = "ecap0";
+};
+
+ecap0: ecap@0 { /* ECAP on da850 */
+ compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x306000 0x80>;
+};
diff --git a/dts/Bindings/pwm/pwm-tiehrpwm.txt b/dts/Bindings/pwm/pwm-tiehrpwm.txt
new file mode 100644
index 000000000..9c100b2c5
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-tiehrpwm.txt
@@ -0,0 +1,29 @@
+TI SOC EHRPWM based PWM controller
+
+Required properties:
+- compatible: Must be "ti,<soc>-ehrpwm".
+ for am33xx - compatible = "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+- reg: physical base address and size of the registers map.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the EHRPWM:
+ "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+
+Example:
+
+ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
+ compatible = "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48300200 0x100>;
+ ti,hwmods = "ehrpwm0";
+};
+
+ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
+ compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x300000 0x2000>;
+};
diff --git a/dts/Bindings/pwm/pwm-tipwmss.txt b/dts/Bindings/pwm/pwm-tipwmss.txt
new file mode 100644
index 000000000..f7eae77f8
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-tipwmss.txt
@@ -0,0 +1,31 @@
+TI SOC based PWM Subsystem
+
+Required properties:
+- compatible: Must be "ti,am33xx-pwmss";
+- reg: physical base address and size of the registers map.
+- address-cells: Specify the number of u32 entries needed in child nodes.
+ Should set to 1.
+- size-cells: specify number of u32 entries needed to specify child nodes size
+ in reg property. Should set to 1.
+- ranges: describes the address mapping of a memory-mapped bus. Should set to
+ physical address map of child's base address, physical address within
+ parent's address space and length of the address map. For am33xx,
+ 3 set of child register maps present, ECAP register space, EQEP
+ register space, EHRPWM register space.
+
+Also child nodes should also populated under PWMSS DT node.
+
+Example:
+pwmss0: pwmss@48300000 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x48300000 0x10>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48300100 0x48300100 0x80 /* ECAP */
+ 0x48300180 0x48300180 0x80 /* EQEP */
+ 0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+ /* child nodes go here */
+};
diff --git a/dts/Bindings/pwm/pwm.txt b/dts/Bindings/pwm/pwm.txt
new file mode 100644
index 000000000..8556263b8
--- /dev/null
+++ b/dts/Bindings/pwm/pwm.txt
@@ -0,0 +1,69 @@
+Specifying PWM information for devices
+======================================
+
+1) PWM user nodes
+-----------------
+
+PWM users should specify a list of PWM devices that they want to use
+with a property containing a 'pwm-list':
+
+ pwm-list ::= <single-pwm> [pwm-list]
+ single-pwm ::= <pwm-phandle> <pwm-specifier>
+ pwm-phandle : phandle to PWM controller node
+ pwm-specifier : array of #pwm-cells specifying the given PWM
+ (controller specific)
+
+PWM properties should be named "pwms". The exact meaning of each pwms
+property must be documented in the device tree binding for each device.
+An optional property "pwm-names" may contain a list of strings to label
+each of the PWM devices listed in the "pwms" property. If no "pwm-names"
+property is given, the name of the user node will be used as fallback.
+
+Drivers for devices that use more than a single PWM device can use the
+"pwm-names" property to map the name of the PWM device requested by the
+pwm_get() call to an index into the list given by the "pwms" property.
+
+The following example could be used to describe a PWM-based backlight
+device:
+
+ pwm: pwm {
+ #pwm-cells = <2>;
+ };
+
+ [...]
+
+ bl: backlight {
+ pwms = <&pwm 0 5000000>;
+ pwm-names = "backlight";
+ };
+
+Note that in the example above, specifying the "pwm-names" is redundant
+because the name "backlight" would be used as fallback anyway.
+
+pwm-specifier typically encodes the chip-relative PWM number and the PWM
+period in nanoseconds.
+
+Optionally, the pwm-specifier can encode a number of flags (defined in
+<dt-bindings/pwm/pwm.h>) in a third cell:
+- PWM_POLARITY_INVERTED: invert the PWM signal polarity
+
+Example with optional PWM specifier for inverse polarity
+
+ bl: backlight {
+ pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>;
+ pwm-names = "backlight";
+ };
+
+2) PWM controller nodes
+-----------------------
+
+PWM controller nodes must specify the number of cells used for the
+specifier using the '#pwm-cells' property.
+
+An example PWM controller might look like this:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
diff --git a/dts/Bindings/pwm/pxa-pwm.txt b/dts/Bindings/pwm/pxa-pwm.txt
new file mode 100644
index 000000000..5ae9f1e3c
--- /dev/null
+++ b/dts/Bindings/pwm/pxa-pwm.txt
@@ -0,0 +1,30 @@
+Marvell PWM controller
+
+Required properties:
+- compatible: should be one or more of:
+ - "marvell,pxa250-pwm"
+ - "marvell,pxa270-pwm"
+ - "marvell,pxa168-pwm"
+ - "marvell,pxa910-pwm"
+- reg: Physical base address and length of the registers used by the PWM channel
+ Note that one device instance must be created for each PWM that is used, so the
+ length covers only the register window for one PWM output, not that of the
+ entire PWM controller. Currently length is 0x10 for all supported devices.
+- #pwm-cells: Should be 1. This cell is used to specify the period in
+ nanoseconds.
+
+Example PWM device node:
+
+pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa250-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+};
+
+Example PWM client node:
+
+backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 5000000>;
+ ...
+}
diff --git a/dts/Bindings/pwm/renesas,tpu-pwm.txt b/dts/Bindings/pwm/renesas,tpu-pwm.txt
new file mode 100644
index 000000000..b067e84a9
--- /dev/null
+++ b/dts/Bindings/pwm/renesas,tpu-pwm.txt
@@ -0,0 +1,28 @@
+* Renesas R-Car Timer Pulse Unit PWM Controller
+
+Required Properties:
+
+ - compatible: should be one of the following.
+ - "renesas,tpu-r8a73a4": for R8A77A4 (R-Mobile APE6) compatible PWM controller.
+ - "renesas,tpu-r8a7740": for R8A7740 (R-Mobile A1) compatible PWM controller.
+ - "renesas,tpu-r8a7790": for R8A7790 (R-Car H2) compatible PWM controller.
+ - "renesas,tpu-sh7372": for SH7372 (SH-Mobile AP4) compatible PWM controller.
+ - "renesas,tpu": for generic R-Car TPU PWM controller.
+
+ - reg: Base address and length of each memory resource used by the PWM
+ controller hardware module.
+
+ - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+
+Please refer to pwm.txt in this directory for details of the common PWM bindings
+used by client devices.
+
+Example: R8A7740 (R-Car A1) TPU controller node
+
+ tpu: pwm@e6600000 {
+ compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+ reg = <0xe6600000 0x100>;
+ #pwm-cells = <3>;
+ };
diff --git a/dts/Bindings/pwm/spear-pwm.txt b/dts/Bindings/pwm/spear-pwm.txt
new file mode 100644
index 000000000..b486de2c3
--- /dev/null
+++ b/dts/Bindings/pwm/spear-pwm.txt
@@ -0,0 +1,17 @@
+== ST SPEAr SoC PWM controller ==
+
+Required properties:
+- compatible: should be one of:
+ - "st,spear320-pwm"
+ - "st,spear1340-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+
+Example:
+
+ pwm: pwm@a8000000 {
+ compatible ="st,spear320-pwm";
+ reg = <0xa8000000 0x1000>;
+ #pwm-cells = <2>;
+ };
diff --git a/dts/Bindings/pwm/ti,twl-pwm.txt b/dts/Bindings/pwm/ti,twl-pwm.txt
new file mode 100644
index 000000000..4e32bee11
--- /dev/null
+++ b/dts/Bindings/pwm/ti,twl-pwm.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers
+
+Supported PWMs:
+On TWL4030 series: PWM1 and PWM2
+On TWL6030 series: PWM0 and PWM1
+
+Required properties:
+- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm"
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+
+Example:
+
+twl_pwm: pwm {
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+};
diff --git a/dts/Bindings/pwm/ti,twl-pwmled.txt b/dts/Bindings/pwm/ti,twl-pwmled.txt
new file mode 100644
index 000000000..9f4b46090
--- /dev/null
+++ b/dts/Bindings/pwm/ti,twl-pwmled.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers connected to LED terminals
+
+Supported PWMs:
+On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
+On TWL6030 series: LED PWM (mainly used as charging indicator LED)
+
+Required properties:
+- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled"
+- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+
+Example:
+
+twl_pwmled: pwmled {
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+};
diff --git a/dts/Bindings/pwm/vt8500-pwm.txt b/dts/Bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 000000000..a76390e6d
--- /dev/null
+++ b/dts/Bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,18 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+ #pwm-cells = <3>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x1000>;
+ clocks = <&clkpwm>;
+};