diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-07-08 14:44:21 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-07-08 14:44:21 +0200 |
commit | 87360e3dd42bb627a9f2611f961728c0789e1c21 (patch) | |
tree | afefc88c862d9feafb0cdb075badeb8d32d8efd2 /dts/Bindings/regulator/max8973-regulator.txt | |
parent | 80936d6aaeea1b10ce4eb81c54eece2f55f8e209 (diff) | |
download | barebox-87360e3dd42bb627a9f2611f961728c0789e1c21.tar.gz barebox-87360e3dd42bb627a9f2611f961728c0789e1c21.tar.xz |
dts: update to v4.2-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/regulator/max8973-regulator.txt')
-rw-r--r-- | dts/Bindings/regulator/max8973-regulator.txt | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/dts/Bindings/regulator/max8973-regulator.txt b/dts/Bindings/regulator/max8973-regulator.txt index 4f15d8a1bf..55efb24e56 100644 --- a/dts/Bindings/regulator/max8973-regulator.txt +++ b/dts/Bindings/regulator/max8973-regulator.txt @@ -2,12 +2,30 @@ Required properties: -- compatible: must be "maxim,max8973" +- compatible: must be one of following: + "maxim,max8973" + "maxim,max77621". - reg: the i2c slave address of the regulator. It should be 0x1b. Any standard regulator properties can be used to configure the single max8973 DCDC. +Optional properties: + +-maxim,externally-enable: boolean, externally control the regulator output + enable/disable. +-maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided + then externally enable control will be considered. +-maxim,dvs-gpio: GPIO which is connected to DVS pin of device. +-maxim,dvs-default-state: Default state of GPIO during initialisation. + 1 for HIGH and 0 for LOW. +-maxim,enable-remote-sense: boolean, enable reote sense. +-maxim,enable-falling-slew-rate: boolean, enable falling slew rate. +-maxim,enable-active-discharge: boolean: enable active discharge. +-maxim,enable-frequency-shift: boolean, enable 9% frequency shift. +-maxim,enable-bias-control: boolean, enable bias control. By enabling this + startup delay can be reduce to 20us from 220us. + Example: max8973@1b { |