dts: update to v4.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 93 insertions, 12 deletions

diff --git a/dts/Bindings/regulator/da9211.txt b/dts/Bindings/regulator/da9211.txt
index 0f2a6f8fca..27717e816e 100644
--- a/dts/Bindings/regulator/da9211.txt
+++ b/dts/Bindings/regulator/da9211.txt
@@ -1,8 +1,9 @@
-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+ Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
-  or "dlg,da9214" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
+  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -16,7 +17,6 @@ Optional properties:
 - Any optional property defined in regulator.txt
 
 Example 1) DA9211
-
 	pmic: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
@@ -35,7 +35,6 @@ Example 1) DA9211
 	};
 
 Example 2) DA9212
-
 	pmic: da9212@68 {
 		compatible = "dlg,da9212";
 		reg = <0x68>;
@@ -79,7 +78,25 @@ Example 3) DA9213
 		};
 	};
 
-Example 4) DA9214
+Example 4) DA9223
+	pmic: da9223@68 {
+		compatible = "dlg,da9223";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 5) DA9214
 	pmic: da9214@68 {
 		compatible = "dlg,da9214";
 		reg = <0x68>;
@@ -105,7 +122,33 @@ Example 4) DA9214
 		};
 	};
 
-Example 5) DA9215
+Example 6) DA9224
+	pmic: da9224@68 {
+		compatible = "dlg,da9224";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 7) DA9215
 	pmic: da9215@68 {
 		compatible = "dlg,da9215";
 		reg = <0x68>;
@@ -131,3 +174,28 @@ Example 5) DA9215
 		};
 	};
 
+Example 8) DA9225
+	pmic: da9225@68 {
+		compatible = "dlg,da9225";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
diff --git a/dts/Bindings/regulator/max77686.txt b/dts/Bindings/regulator/max77686.txt
index 0dded64d89..e9f7578ca0 100644
--- a/dts/Bindings/regulator/max77686.txt
+++ b/dts/Bindings/regulator/max77686.txt
@@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow:
 
 Example:
 
-	max77686: pmic@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 IRQ_TYPE_NONE>;
diff --git a/dts/Bindings/regulator/max77802.txt b/dts/Bindings/regulator/max77802.txt
index 879e98d3b9..b82943d836 100644
--- a/dts/Bindings/regulator/max77802.txt
+++ b/dts/Bindings/regulator/max77802.txt
@@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend".
 
 Example:
 
-	max77802@09 {
+	max77802@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
diff --git a/dts/Bindings/regulator/pfuze100.txt b/dts/Bindings/regulator/pfuze100.txt
index 444c47831a..c6dd3f5e48 100644
--- a/dts/Bindings/regulator/pfuze100.txt
+++ b/dts/Bindings/regulator/pfuze100.txt
@@ -21,7 +21,7 @@ Each regulator is defined using the standard binding for regulators.
 
 Example 1: PFUZE100
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -122,7 +122,7 @@ Example 1: PFUZE100
 
 Example 2: PFUZE200
 
-	pmic: pfuze200@08 {
+	pmic: pfuze200@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -216,7 +216,7 @@ Example 2: PFUZE200
 
 Example 3: PFUZE3000
 
-	pmic: pfuze3000@08 {
+	pmic: pfuze3000@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/dts/Bindings/regulator/qcom,spmi-regulator.txt b/dts/Bindings/regulator/qcom,spmi-regulator.txt
index 0fa3b0fac1..57d2c65899 100644
--- a/dts/Bindings/regulator/qcom,spmi-regulator.txt
+++ b/dts/Bindings/regulator/qcom,spmi-regulator.txt
@@ -8,6 +8,7 @@ Qualcomm SPMI Regulators
 			"qcom,pm8916-regulators"
 			"qcom,pm8941-regulators"
 			"qcom,pm8994-regulators"
+			"qcom,pmi8994-regulators"
 
 - interrupts:
 	Usage: optional
@@ -100,6 +101,15 @@ Qualcomm SPMI Regulators
 	Definition: Reference to regulator supplying the input pin, as
 		    described in the data sheet.
 
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1-supply:
+	Usage: optional (pmi8994 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
 
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
@@ -122,6 +132,9 @@ pm8994:
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
 	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
 
+pmi8994:
+	s1, s2, s3, l1
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below: