dts: update to v4.17-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 73 insertions, 0 deletions

diff --git a/dts/Bindings/regulator/88pg86x.txt b/dts/Bindings/regulator/88pg86x.txt
new file mode 100644
index 0000000000..13b7f49a2e
--- /dev/null
+++ b/dts/Bindings/regulator/88pg86x.txt
@@ -0,0 +1,22 @@
+Marvell 88PG867/88PG868 voltage regulators
+
+Required properties:
+- compatible: one of "marvell,88pg867", "marvell,88pg868";
+- reg: I2C slave address.
+
+Optional subnodes for regulators: "buck1", "buck2", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+	pg868@19 {
+		compatible = "marvell,88pg868";
+		reg = <0x19>;
+
+		vcpu: buck1 {
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1350000>;
+		};
+	};
diff --git a/dts/Bindings/regulator/fixed-regulator.txt b/dts/Bindings/regulator/fixed-regulator.txt
index 4fae41d547..0c2a6c8a15 100644
--- a/dts/Bindings/regulator/fixed-regulator.txt
+++ b/dts/Bindings/regulator/fixed-regulator.txt
@@ -2,6 +2,7 @@ Fixed Voltage regulators
 
 Required properties:
 - compatible: Must be "regulator-fixed";
+- regulator-name: Defined in regulator.txt as optional, but required here.
 
 Optional properties:
 - gpio: gpio to use for enable control
diff --git a/dts/Bindings/regulator/gpio-regulator.txt b/dts/Bindings/regulator/gpio-regulator.txt
index dd1ed78972..1f496159e2 100644
--- a/dts/Bindings/regulator/gpio-regulator.txt
+++ b/dts/Bindings/regulator/gpio-regulator.txt
@@ -2,6 +2,8 @@ GPIO controlled regulators
 
 Required properties:
 - compatible		: Must be "regulator-gpio".
+- regulator-name	: Defined in regulator.txt as optional, but required
+			  here.
 - states		: Selection of available voltages and GPIO configs.
                           if there are no states, then use a fixed regulator
 
diff --git a/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt b/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt
index 4e3dfb5b5f..58a1d97972 100644
--- a/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -23,7 +23,9 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8916-regulators"
 		    "qcom,rpm-pm8941-regulators"
 		    "qcom,rpm-pm8994-regulators"
+		    "qcom,rpm-pm8998-regulators"
 		    "qcom,rpm-pma8084-regulators"
+		    "qcom,rpm-pmi8998-regulators"
 
 - vdd_s1-supply:
 - vdd_s2-supply:
@@ -131,6 +133,38 @@ Regulator nodes are identified by their compatible:
 - vdd_s10-supply:
 - vdd_s11-supply:
 - vdd_s12-supply:
+- vdd_s13-supply:
+- vdd_l1_l27-supply:
+- vdd_l20_l24-supply:
+- vdd_l26-supply:
+- vdd_l2_l8_l17-supply:
+- vdd_l3_l11-supply:
+- vdd_l4_l5-supply:
+- vdd_l6-supply:
+- vdd_l7_l12_l14_l15-supply:
+- vdd_l9-supply:
+- vdd_l10_l23_l25-supply:
+- vdd_l13_l19_l21-supply:
+- vdd_l16_l28-supply:
+- vdd_l18_l22-supply:
+- vdd_lvs1_lvs2-supply:
+	Usage: optional (pmi8998 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
 - vdd_l1_l11-supply:
 - vdd_l2_l3_l4_l27-supply:
 - vdd_l5_l7-supply:
@@ -148,6 +182,12 @@ Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet
 
+- vdd_bob-supply:
+	Usage: optional (pmi8998 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the pmics below.
@@ -169,11 +209,19 @@ pm8994:
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
 	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
 
+pm8998:
+	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4,
+	l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+	l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
+
 pma8084:
 	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
 	l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
 
+pmi8998:
+	bob
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt.