dts: update to v5.16-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 249 insertions, 78 deletions

diff --git a/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
new file mode 100644
index 0000000000..d892d29a65
--- /dev/null
+++ b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson AO ARC Remote Processor bindings
+
+description:
+  Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core
+  controller for always-on operations, typically used for managing
+  system suspend. Meson6 and older use a ARC core based on the ARCv1
+  ISA, while Meson8, Meson8b and Meson8m2 use an ARC EM4 (ARCv2 ISA)
+  core.
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-ao-arc
+          - amlogic,meson8b-ao-arc
+      - const: amlogic,meson-mx-ao-arc
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  reg:
+    description:
+      Address ranges of the remap and CPU control addresses for the
+      remote processor.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: remap
+      - const: cpu
+
+  resets:
+    minItems: 1
+
+  clocks:
+    minItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandles to a reserved SRAM region which is used as the memory of
+      the ARC core. The region should be defined as child nodes of the
+      AHB SRAM node as per the generic bindings in
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+  amlogic,secbus2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the SECBUS2 region which contains some configuration
+      bits of this remote processor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - clocks
+  - sram
+  - amlogic,secbus2
+
+additionalProperties: false
+
+examples:
+  - |
+    remoteproc@1c {
+      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+      reg = <0x1c 0x8>, <0x38 0x8>;
+      reg-names = "remap", "cpu";
+      resets = <&media_cpu_reset>;
+      clocks = <&media_cpu_clock>;
+      sram = <&ahb_sram_ao_arc>;
+      amlogic,secbus2 = <&secbus2>;
+    };
+
+...
diff --git a/dts/Bindings/remoteproc/ingenic,vpu.yaml b/dts/Bindings/remoteproc/ingenic,vpu.yaml
index d0aa91bbf5..aaaaabad46 100644
--- a/dts/Bindings/remoteproc/ingenic,vpu.yaml
+++ b/dts/Bindings/remoteproc/ingenic,vpu.yaml
@@ -58,7 +58,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
 
     vpu: video-decoder@132a0000 {
       compatible = "ingenic,jz4770-vpu-rproc";
diff --git a/dts/Bindings/remoteproc/mtk,scp.txt b/dts/Bindings/remoteproc/mtk,scp.txt
deleted file mode 100644
index 3f5f78764b..0000000000
--- a/dts/Bindings/remoteproc/mtk,scp.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Mediatek SCP Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-Mediatek SoCs.
-
-Required properties:
-- compatible		Should be "mediatek,mt8183-scp"
-- reg			Should contain the address ranges for memory regions:
-			SRAM, CFG, and L1TCM.
-- reg-names		Contains the corresponding names for the memory regions:
-			"sram", "cfg", and "l1tcm".
-- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
-- clock-names		Contains the corresponding name for the clock. This
-			should be named "main".
-
-Subnodes
---------
-
-Subnodes of the SCP represent rpmsg devices. The names of the devices are not
-important. The properties of these nodes are defined by the individual bindings
-for the rpmsg devices - but must contain the following property:
-
-- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
-			the subnode to rpmsg device announced by SCP.
-
-Example:
-
-	scp: scp@10500000 {
-		compatible = "mediatek,mt8183-scp";
-		reg = <0 0x10500000 0 0x80000>,
-		      <0 0x105c0000 0 0x5000>;
-		reg-names = "sram", "cfg";
-		clocks = <&infracfg CLK_INFRA_SCPSYS>;
-		clock-names = "main";
-	};
diff --git a/dts/Bindings/remoteproc/mtk,scp.yaml b/dts/Bindings/remoteproc/mtk,scp.yaml
new file mode 100644
index 0000000000..d21a25ee96
--- /dev/null
+++ b/dts/Bindings/remoteproc/mtk,scp.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SCP Bindings
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some
+  Mediatek SoCs.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-scp
+      - mediatek,mt8192-scp
+      - mediatek,mt8195-scp
+
+  reg:
+    description:
+      Should contain the address ranges for memory regions SRAM, CFG, and
+      L1TCM.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: sram
+      - const: cfg
+      - const: l1tcm
+
+  clocks:
+    description:
+      Clock for co-processor (see ../clock/clock-bindings.txt).
+      Required by mt8183 and mt8192.
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+if:
+  properties:
+    compatible:
+      enum:
+        - mediatek,mt8183-scp
+        - mediatek,mt8192-scp
+then:
+  required:
+    - clocks
+    - clock-names
+
+additionalProperties:
+  type: object
+  description:
+    Subnodes of the SCP represent rpmsg devices. The names of the devices
+    are not important. The properties of these nodes are defined by the
+    individual bindings for the rpmsg devices.
+  properties:
+    mediatek,rpmsg-name:
+      $ref: /schemas/types.yaml#/definitions/string-array
+      description:
+        Contains the name for the rpmsg device. Used to match
+        the subnode to rpmsg device announced by SCP.
+
+  required:
+    - mediatek,rpmsg-name
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+
+    scp@10500000 {
+        compatible = "mediatek,mt8183-scp";
+        reg = <0x10500000 0x80000>,
+              <0x10700000 0x8000>,
+              <0x10720000 0xe0000>;
+        reg-names = "sram", "cfg", "l1tcm";
+        clocks = <&infracfg CLK_INFRA_SCPSYS>;
+        clock-names = "main";
+
+        cros_ec {
+            mediatek,rpmsg-name = "cros-ec-rpmsg";
+        };
+    };
diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml
index 0c112f3264..63e06d93bc 100644
--- a/dts/Bindings/remoteproc/qcom,adsp.yaml
+++ b/dts/Bindings/remoteproc/qcom,adsp.yaml
@@ -25,6 +25,7 @@ properties:
       - qcom,qcs404-cdsp-pas
       - qcom,qcs404-wcss-pas
       - qcom,sc7180-mpss-pas
+      - qcom,sc7280-mpss-pas
       - qcom,sc8180x-adsp-pas
       - qcom,sc8180x-cdsp-pas
       - qcom,sc8180x-mpss-pas
@@ -93,6 +94,10 @@ properties:
     maxItems: 1
     description: Reference to the reserved-memory for the Hexagon core
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: States used by the AP to signal the Hexagon core
@@ -147,6 +152,7 @@ allOf:
               - qcom,msm8998-adsp-pas
               - qcom,qcs404-adsp-pas
               - qcom,qcs404-wcss-pas
+              - qcom,sc7280-mpss-pas
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
               - qcom,sc8180x-mpss-pas
@@ -292,6 +298,7 @@ allOf:
           contains:
             enum:
               - qcom,sc7180-mpss-pas
+              - qcom,sc7280-mpss-pas
               - qcom,sc8180x-mpss-pas
               - qcom,sdx55-mpss-pas
               - qcom,sm8150-mpss-pas
@@ -369,13 +376,11 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MX power domain
             - description: MSS power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mx
             - const: mss
@@ -391,43 +396,21 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
 
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,sc7280-mpss-pas
+              - qcom,sdx55-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
-            - description: CX power domain
-            - description: MSS power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
-            - const: mss
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdx55-mpss-pas
-    then:
-      properties:
-        power-domains:
-          items:
             - description: CX power domain
             - description: MSS power domain
         power-domain-names:
@@ -451,12 +434,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: LCX power domain
             - description: LMX power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: lcx
             - const: lmx
 
@@ -470,12 +451,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MXC power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mxc
 
@@ -500,6 +479,7 @@ allOf:
           contains:
             enum:
               - qcom,sc7180-mpss-pas
+              - qcom,sc7280-mpss-pas
     then:
       properties:
         resets:
@@ -511,6 +491,25 @@ allOf:
             - const: mss_restart
             - const: pdc_reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,msm8998-slpi-pas
+              - qcom,qcs404-adsp-pas
+              - qcom,qcs404-cdsp-pas
+              - qcom,qcs404-wcss-pas
+              - qcom,sdm660-adsp-pas
+              - qcom,sdx55-mpss-pas
+    then:
+      properties:
+        qcom,qmp: false
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt
index 69c49c7b2c..8f1507052a 100644
--- a/dts/Bindings/remoteproc/qcom,q6v5.txt
+++ b/dts/Bindings/remoteproc/qcom,q6v5.txt
@@ -15,6 +15,7 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
 		    "qcom,sc7180-mss-pil"
+		    "qcom,sc7280-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -47,6 +48,7 @@ on the Qualcomm Hexagon core.
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 	qcom,sc7180-mss-pil:
+	qcom,sc7280-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -87,6 +89,8 @@ on the Qualcomm Hexagon core.
 	qcom,sc7180-mss-pil:
 		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
 		    "nav"
+	qcom,sc7280-mss-pil:
+		    must be "iface", "xo", "snoc_axi", "offline", "pka"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -98,7 +102,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -107,7 +111,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
 should be referenced as follows:
@@ -173,8 +177,16 @@ For the compatible string below the following supplies are required:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
 	qcom,sc7180-mss-pil:
+		    must be "cx", "mx", "mss"
+	qcom,sc7280-mss-pil:
+		    must be "cx", "mss"
 	qcom,sdm845-mss-pil:
-		    must be "cx", "mx", "mss", "load_state"
+		    must be "cx", "mx", "mss"
+
+- qcom,qmp:
+	Usage: optional
+	Value type: <phandle>
+	Definition: reference to the AOSS side-channel message RAM.
 
 - qcom,smem-states:
 	Usage: required
@@ -193,6 +205,9 @@ For the compatible string below the following supplies are required:
 	Definition: a phandle reference to a syscon representing TCSR followed
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
+		    a phandle reference to a syscon representing TCSR followed
+		    by the four offsets within syscon for q6, modem, nc and vq6
+		    halt registers on SC7280 SoCs.
 
 For the compatible strings below the following phandle references are required:
   "qcom,sc7180-mss-pil"
@@ -203,6 +218,24 @@ For the compatible strings below the following phandle references are required:
 		    by the offset within syscon for conn_box_spare0 register
 		    used by the modem sub-system running on SC7180 SoC.
 
+For the compatible strings below the following phandle references are required:
+  "qcom,sc7280-mss-pil"
+- qcom,ext-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: two phandle references to syscons representing TCSR_REG and
+		    TCSR register space followed by the two offsets within the syscon
+		    to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
+		    registers respectively.
+
+- qcom,qaccept-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a phandle reference to a syscon representing TCSR followed
+		    by the three offsets within syscon for mdm, cx and axi
+		    qaccept registers used by the modem sub-system running on
+		    SC7280 SoC.
+
 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
 on platforms which do not have TrustZone.
 
diff --git a/dts/Bindings/remoteproc/st,stm32-rproc.yaml b/dts/Bindings/remoteproc/st,stm32-rproc.yaml
index 1e6225677e..b587c97c28 100644
--- a/dts/Bindings/remoteproc/st,stm32-rproc.yaml
+++ b/dts/Bindings/remoteproc/st,stm32-rproc.yaml
@@ -11,8 +11,8 @@ description:
   boots firmwares on the ST32MP family chipset.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 6070456a7b..5ec6505ac4 100644
--- a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -133,9 +133,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    / {
-        model = "Texas Instruments K3 J721E SoC";
-        compatible = "ti,j721e";
+    soc {
         #address-cells = <2>;
         #size-cells = <2>;
 
diff --git a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
index 130fbaacc4..eeef255c40 100644
--- a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -230,9 +230,7 @@ additionalProperties: false
 
 examples:
   - |
-    / {
-        model = "Texas Instruments K3 AM654 SoC";
-        compatible = "ti,am654-evm", "ti,am654";
+    soc {
         #address-cells = <2>;
         #size-cells = <2>;