dts: update to v5.6-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 101 insertions, 2 deletions

diff --git a/dts/Bindings/remoteproc/mtk,scp.txt b/dts/Bindings/remoteproc/mtk,scp.txt
new file mode 100644
index 0000000000..3ba668bab1
--- /dev/null
+++ b/dts/Bindings/remoteproc/mtk,scp.txt
@@ -0,0 +1,36 @@
+Mediatek SCP Bindings
+----------------------------------------
+
+This binding provides support for ARM Cortex M4 Co-processor found on some
+Mediatek SoCs.
+
+Required properties:
+- compatible		Should be "mediatek,mt8183-scp"
+- reg			Should contain the address ranges for the two memory
+			regions, SRAM and CFG.
+- reg-names		Contains the corresponding names for the two memory
+			regions. These should be named "sram" & "cfg".
+- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-names		Contains the corresponding name for the clock. This
+			should be named "main".
+
+Subnodes
+--------
+
+Subnodes of the SCP represent rpmsg devices. The names of the devices are not
+important. The properties of these nodes are defined by the individual bindings
+for the rpmsg devices - but must contain the following property:
+
+- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
+			the subnode to rpmsg device announced by SCP.
+
+Example:
+
+	scp: scp@10500000 {
+		compatible = "mediatek,mt8183-scp";
+		reg = <0 0x10500000 0 0x80000>,
+		      <0 0x105c0000 0 0x5000>;
+		reg-names = "sram", "cfg";
+		clocks = <&infracfg CLK_INFRA_SCPSYS>;
+		clock-names = "main";
+	};
diff --git a/dts/Bindings/remoteproc/qcom,adsp.txt b/dts/Bindings/remoteproc/qcom,adsp.txt
index 292dfda977..9938918b2f 100644
--- a/dts/Bindings/remoteproc/qcom,adsp.txt
+++ b/dts/Bindings/remoteproc/qcom,adsp.txt
@@ -10,11 +10,17 @@ on the Qualcomm ADSP Hexagon core.
 		    "qcom,msm8974-adsp-pil"
 		    "qcom,msm8996-adsp-pil"
 		    "qcom,msm8996-slpi-pil"
+		    "qcom,msm8998-adsp-pas"
+		    "qcom,msm8998-slpi-pas"
 		    "qcom,qcs404-adsp-pas"
 		    "qcom,qcs404-cdsp-pas"
 		    "qcom,qcs404-wcss-pas"
 		    "qcom,sdm845-adsp-pas"
 		    "qcom,sdm845-cdsp-pas"
+		    "qcom,sm8150-adsp-pas"
+		    "qcom,sm8150-cdsp-pas"
+		    "qcom,sm8150-mpss-pas"
+		    "qcom,sm8150-slpi-pas"
 
 - interrupts-extended:
 	Usage: required
@@ -29,12 +35,18 @@ on the Qualcomm ADSP Hexagon core.
 	qcom,msm8974-adsp-pil:
 	qcom,msm8996-adsp-pil:
 	qcom,msm8996-slpi-pil:
+	qcom,msm8998-adsp-pas:
+	qcom,msm8998-slpi-pas:
 	qcom,qcs404-adsp-pas:
 	qcom,qcs404-cdsp-pas:
 	qcom,sdm845-adsp-pas:
 	qcom,sdm845-cdsp-pas:
+	qcom,sm8150-adsp-pas:
+	qcom,sm8150-cdsp-pas:
+	qcom,sm8150-slpi-pas:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,qcs404-wcss-pas:
+	qcom,sm8150-mpss-pas:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
 
@@ -67,6 +79,38 @@ on the Qualcomm ADSP Hexagon core.
 	Definition: reference to the px regulator to be held on behalf of the
 		    booting Hexagon core
 
+- power-domains:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to power-domains that match the power-domain-names
+
+- power-domain-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: The power-domains needed depend on the compatible string:
+	qcom,msm8974-adsp-pil:
+	qcom,msm8996-adsp-pil:
+	qcom,msm8998-adsp-pas:
+		    must be "cx"
+	qcom,msm8996-slpi-pil:
+		    must be "ss_cx"
+	qcom,msm8998-slpi-pas:
+		    must be "ssc_cx"
+	qcom,qcs404-adsp-pas:
+		    must be "lpi_cx"
+	qcom,qcs404-cdsp-pas:
+	qcom,qcs404-wcss-pas:
+		    must be "mx"
+	qcom,sdm845-adsp-pas:
+	qcom,sdm845-cdsp-pas:
+	qcom,sm8150-adsp-pas:
+	qcom,sm8150-cdsp-pas:
+		    must be "cx", "load_state"
+	qcom,sm8150-mpss-pas:
+		    must be "cx", "load_state", "mss"
+	qcom,sm8150-slpi-pas:
+		    must be "lcx", "lmx", "load_state"
+
 - memory-region:
 	Usage: required
 	Value type: <phandle>
diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt
index c416746f93..88dfa3fc15 100644
--- a/dts/Bindings/remoteproc/qcom,q6v5.txt
+++ b/dts/Bindings/remoteproc/qcom,q6v5.txt
@@ -13,6 +13,7 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
+		    "qcom,sc7180-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -43,6 +44,7 @@ on the Qualcomm Hexagon core.
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
+	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -75,6 +77,9 @@ on the Qualcomm Hexagon core.
 	qcom,msm8998-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "qdss"
+	qcom,sc7180-mss-pil:
+		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
+		    "mss_crypto", "mss_nav", "nav"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -86,7 +91,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SDM845 SoCs
+		    sub-system on SC7180, SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -95,7 +100,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SDM845 SoCs
+		    sub-system on SC7180, SDM845 SoCs
 
 For the compatible strings below the following supplies are required:
   "qcom,q6v5-pil"
@@ -144,6 +149,7 @@ For the compatible string below the following supplies are required:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
+	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss", "load_state"
 
@@ -165,6 +171,19 @@ For the compatible string below the following supplies are required:
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
 
+For the compatible strings below the following phandle references are required:
+  "qcom,sc7180-mss-pil"
+- qcom,halt-nav-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to a list of 2 phandles with one offset each for
+		    the modem sub-system running on SC7180 SoC. The first
+		    phandle reference is to the mss clock node followed by the
+		    offset within register space for nav halt register. The
+		    second phandle reference is to a syscon representing TCSR
+		    followed by the offset within syscon for conn_box_spare0
+		    register.
+
 = SUBNODES:
 The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
 the memory regions used by the Hexagon firmware. Each sub-node must contain: