summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/reset
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-09-11 08:26:30 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-09-11 17:23:13 +0200
commit35f607bc7da71b302fd6bf3d6d48d7ea66df1195 (patch)
treedd2cf14c56430d21079c794fa6e03d7f5d91070e /dts/Bindings/reset
parent625eea2765d94aee016cf25d9cabecde8eae0775 (diff)
downloadbarebox-35f607bc7da71b302fd6bf3d6d48d7ea66df1195.tar.gz
dts: update to v4.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/reset')
-rw-r--r--dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt21
-rw-r--r--dts/Bindings/reset/qcom,aoss-reset.txt52
-rw-r--r--dts/Bindings/reset/uniphier-reset.txt56
3 files changed, 129 insertions, 0 deletions
diff --git a/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt
new file mode 100644
index 0000000..26e542e
--- /dev/null
+++ b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt
@@ -0,0 +1,21 @@
+* Amlogic audio memory arbiter controller
+
+The Amlogic Audio ARB is a simple device which enables or
+disables the access of Audio FIFOs to DDR on AXG based SoC.
+
+Required properties:
+- compatible: 'amlogic,meson-axg-audio-arb'
+- reg: physical base address of the controller and length of memory
+ mapped region.
+- clocks: phandle to the fifo peripheral clock provided by the audio
+ clock controller.
+- #reset-cells: must be 1.
+
+Example on the A113 SoC:
+
+arb: reset-controller@280 {
+ compatible = "amlogic,meson-axg-audio-arb";
+ reg = <0x0 0x280 0x0 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+};
diff --git a/dts/Bindings/reset/qcom,aoss-reset.txt b/dts/Bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 0000000..510c748
--- /dev/null
+++ b/dts/Bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,52 @@
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS-CC (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,sdm845-aoss-cc"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the register
+ space.
+
+- #reset-cells:
+ Usage: required
+ Value type: <uint>
+ Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sdm845-aoss-cc";
+ reg = <0xc2a0000 0x31000>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+ ...
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ ...
+};
diff --git a/dts/Bindings/reset/uniphier-reset.txt b/dts/Bindings/reset/uniphier-reset.txt
index 93efed6..101743d 100644
--- a/dts/Bindings/reset/uniphier-reset.txt
+++ b/dts/Bindings/reset/uniphier-reset.txt
@@ -118,3 +118,59 @@ Example:
other nodes ...
};
+
+
+USB3 core reset
+---------------
+
+USB3 core reset belongs to USB3 glue layer. Before using the core reset,
+it is necessary to control the clocks and resets to enable this layer.
+These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+ "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
+ "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
+ "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+- #reset-cells: Should be 1.
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+ According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+ "gio", "link" - for Pro4 SoC
+ "link" - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+ According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+ "gio", "link" - for Pro4 SoC
+ "link" - for others
+
+Example:
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ regulator {
+ ...
+ };
+
+ phy {
+ ...
+ };
+ ...
+ };