dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 91 insertions, 27 deletions

diff --git a/dts/Bindings/reset/hisilicon,hi3660-reset.txt b/dts/Bindings/reset/hisilicon,hi3660-reset.txt
new file mode 100644
index 0000000000..2bf3344b2a
--- /dev/null
+++ b/dts/Bindings/reset/hisilicon,hi3660-reset.txt
@@ -0,0 +1,43 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller registers are part of the system-ctl block on
+hi3660 SoC.
+
+Required properties:
+- compatible: should be
+		 "hisilicon,hi3660-reset"
+- hisi,rst-syscon: phandle of the reset's syscon.
+- #reset-cells : Specifies the number of cells needed to encode a
+  reset source.  The type shall be a <u32> and the value shall be 2.
+
+	 Cell #1 : offset of the reset assert control
+	           register from the syscon register base
+		   offset + 4: deassert control register
+		   offset + 8: status control register
+	 Cell #2 : bit position of the reset in the reset control register
+
+Example:
+	iomcu: iomcu@ffd7e000 {
+		compatible = "hisilicon,hi3660-iomcu", "syscon";
+		reg = <0x0 0xffd7e000 0x0 0x1000>;
+	};
+
+	iomcu_rst: iomcu_rst_controller {
+		compatible = "hisilicon,hi3660-reset";
+		hisi,rst-syscon = <&iomcu>;
+		#reset-cells = <2>;
+	};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+        i2c0: i2c@..... {
+                ...
+		resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
+                ...
+        };
diff --git a/dts/Bindings/reset/ti-syscon-reset.txt b/dts/Bindings/reset/ti-syscon-reset.txt
index 164c7f34c4..c516d24959 100644
--- a/dts/Bindings/reset/ti-syscon-reset.txt
+++ b/dts/Bindings/reset/ti-syscon-reset.txt
@@ -63,7 +63,7 @@ Example:
 --------
 The following example demonstrates a syscon node, the reset controller node
 using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
-Edison SoC.
+66AK2E SoC.
 
 / {
 	soc {
@@ -71,13 +71,13 @@ Edison SoC.
 			compatible = "syscon", "simple-mfd";
 			reg = <0x02350000 0x1000>;
 
-			pscrst: psc-reset {
+			pscrst: reset-controller {
 				compatible = "ti,k2e-pscrst", "ti,syscon-reset";
 				#reset-cells = <1>;
 
 				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_SET|DEASSERT_CLEAR|STATUS_SET)   /* 0: pcrst-dsp0 */
-					0xa40 5 0xa44 3 0     0 (ASSERT_SET|DEASSERT_CLEAR|STATUS_NONE)  /* 1: pcrst-example */
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET   | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 5 0xa44 3 0     0 (ASSERT_SET   | DEASSERT_CLEAR | STATUS_NONE)  /* 1: example */
 				>;
 			};
 		};
diff --git a/dts/Bindings/reset/uniphier-reset.txt b/dts/Bindings/reset/uniphier-reset.txt
index 5020524cdd..83ab0f599c 100644
--- a/dts/Bindings/reset/uniphier-reset.txt
+++ b/dts/Bindings/reset/uniphier-reset.txt
@@ -6,14 +6,14 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -68,13 +69,13 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
diff --git a/dts/Bindings/reset/zte,zx2967-reset.txt b/dts/Bindings/reset/zte,zx2967-reset.txt
new file mode 100644
index 0000000000..b015508f97
--- /dev/null
+++ b/dts/Bindings/reset/zte,zx2967-reset.txt
@@ -0,0 +1,20 @@
+ZTE zx2967 SoCs Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: should be one of the following.
+	* zte,zx296718-reset
+- reg: physical base address of the controller and length of memory mapped
+	region.
+- #reset-cells: must be 1.
+
+example:
+
+	reset: reset-controller@1461060 {
+		compatible = "zte,zx296718-reset";
+		reg = <0x01461060 0x8>;
+		#reset-cells = <1>;
+	};