dts: update to v4.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 54 insertions, 47 deletions

diff --git a/dts/Bindings/reset/oxnas,reset.txt b/dts/Bindings/reset/oxnas,reset.txt
index 6f06db9300..d27ccb5d04 100644
--- a/dts/Bindings/reset/oxnas,reset.txt
+++ b/dts/Bindings/reset/oxnas,reset.txt
@@ -5,45 +5,19 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "oxsemi,ox810se-reset"
+- compatible: For OX810SE, should be "oxsemi,ox810se-reset"
+	      For OX820, should be "oxsemi,ox820-reset"
 - #reset-cells: 1, see below
 
 Parent node should have the following properties :
-- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+- compatible: For OX810SE, should be :
+			"oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+	      For OX820, should be :
+			"oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
 
-For OX810SE, the indices are :
- - 0 : ARM
- - 1 : COPRO
- - 2 : Reserved
- - 3 : Reserved
- - 4 : USBHS
- - 5 : USBHSPHY
- - 6 : MAC
- - 7 : PCI
- - 8 : DMA
- - 9 : DPE
- - 10 : DDR
- - 11 : SATA
- - 12 : SATA_LINK
- - 13 : SATA_PHY
- - 14 : Reserved
- - 15 : NAND
- - 16 : GPIO
- - 17 : UART1
- - 18 : UART2
- - 19 : MISC
- - 20 : I2S
- - 21 : AHB_MON
- - 22 : UART3
- - 23 : UART4
- - 24 : SGDMA
- - 25 : Reserved
- - 26 : Reserved
- - 27 : Reserved
- - 28 : Reserved
- - 29 : Reserved
- - 30 : Reserved
- - 31 : BUS
+Reset indices are in dt-bindings include files :
+- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h
+- For OX820: include/dt-bindings/reset/oxsemi,ox820.h
 
 example:
 
diff --git a/dts/Bindings/reset/renesas,rst.txt b/dts/Bindings/reset/renesas,rst.txt
new file mode 100644
index 0000000000..fe5e0f37b3
--- /dev/null
+++ b/dts/Bindings/reset/renesas,rst.txt
@@ -0,0 +1,37 @@
+DT bindings for the Renesas R-Car and RZ/G Reset Controllers
+
+The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+following functions:
+  - Latching of the levels on mode pins when PRESET# is negated,
+  - Mode monitoring register,
+  - Reset control of peripheral devices (on R-Car Gen1),
+  - Watchdog timer (on R-Car Gen1),
+  - Register-based reset control and boot address registers for the various CPU
+    cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+
+Required properties:
+  - compatible: Should be
+		  - "renesas,<soctype>-reset-wdt" for R-Car Gen1,
+		  - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
+		Examples with soctypes are:
+		  - "renesas,r8a7743-rst" (RZ/G1M)
+		  - "renesas,r8a7745-rst" (RZ/G1E)
+		  - "renesas,r8a7778-reset-wdt" (R-Car M1A)
+		  - "renesas,r8a7779-reset-wdt" (R-Car H1)
+		  - "renesas,r8a7790-rst" (R-Car H2)
+		  - "renesas,r8a7791-rst" (R-Car M2-W)
+		  - "renesas,r8a7792-rst" (R-Car V2H
+		  - "renesas,r8a7793-rst" (R-Car M2-N)
+		  - "renesas,r8a7794-rst" (R-Car E2)
+		  - "renesas,r8a7795-rst" (R-Car H3)
+		  - "renesas,r8a7796-rst" (R-Car M3-W)
+  - reg: Address start and address range for the device.
+
+
+Example:
+
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7795-rst";
+		reg = <0 0xe6160000 0 0x0200>;
+	};
diff --git a/dts/Bindings/reset/st,sti-powerdown.txt b/dts/Bindings/reset/st,sti-powerdown.txt
index 1cfd21d1df..92527138bc 100644
--- a/dts/Bindings/reset/st,sti-powerdown.txt
+++ b/dts/Bindings/reset/st,sti-powerdown.txt
@@ -16,15 +16,14 @@ Please refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-powerdown"
-	ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- compatible: Should be "st,stih407-powerdown"
 - #reset-cells: 1, see below
 
 example:
 
 	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
 		#reset-cells = <1>;
-		compatible = "st,stih415-powerdown";
 	};
 
 
@@ -37,11 +36,10 @@ index specifying which channel to use, as described in reset.txt
 
 example:
 
-	usb1: usb@fe200000 {
-		resets	= <&powerdown STIH41X_USB1_POWERDOWN>;
+	st_dwc3: dwc3@8f94000 {
+		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 	};
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/dts/Bindings/reset/st,sti-softreset.txt b/dts/Bindings/reset/st,sti-softreset.txt
index 891a2fd85e..a21658f18f 100644
--- a/dts/Bindings/reset/st,sti-softreset.txt
+++ b/dts/Bindings/reset/st,sti-softreset.txt
@@ -15,15 +15,14 @@ Please refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-softreset" example:
-	"st,stih415-softreset" or "st,stih416-softreset";
+- compatible: Should be st,stih407-softreset";
 - #reset-cells: 1, see below
 
 example:
 
 	softreset: softreset-controller {
 		#reset-cells = <1>;
-		compatible = "st,stih415-softreset";
+		compatible = "st,stih407-softreset";
 	};
 
 
@@ -42,5 +41,4 @@ example:
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h