dts: update to v5.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 95 insertions, 11 deletions

diff --git a/dts/Bindings/rtc/abracon,abx80x.txt b/dts/Bindings/rtc/abracon,abx80x.txt
index be789685a1..18b892d010 100644
--- a/dts/Bindings/rtc/abracon,abx80x.txt
+++ b/dts/Bindings/rtc/abracon,abx80x.txt
@@ -27,4 +27,4 @@ and valid to enable charging:
 
  - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
  - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in ohm.
+                          resistor, the other values are in kOhm.
diff --git a/dts/Bindings/rtc/nxp,rtc-2123.txt b/dts/Bindings/rtc/nxp,rtc-2123.txt
index 811124a36d..1994f60180 100644
--- a/dts/Bindings/rtc/nxp,rtc-2123.txt
+++ b/dts/Bindings/rtc/nxp,rtc-2123.txt
@@ -2,6 +2,7 @@ NXP PCF2123 SPI Real Time Clock
 
 Required properties:
 - compatible: should be: "nxp,rtc-pcf2123"
+                      or "microcrystal,rv2123"
 - reg: should be the SPI slave chipselect address
 
 Optional properties:
diff --git a/dts/Bindings/rtc/pcf85363.txt b/dts/Bindings/rtc/pcf85363.txt
index 76fdabc597..94adc1cf93 100644
--- a/dts/Bindings/rtc/pcf85363.txt
+++ b/dts/Bindings/rtc/pcf85363.txt
@@ -1,8 +1,8 @@
-NXP PCF85363 Real Time Clock
+NXP PCF85263/PCF85363 Real Time Clock
 ============================
 
 Required properties:
-- compatible: Should contain "nxp,pcf85363".
+- compatible: Should contain "nxp,pcf85263" or "nxp,pcf85363".
 - reg: I2C address for chip.
 
 Optional properties:
diff --git a/dts/Bindings/rtc/rtc-ds1307.txt b/dts/Bindings/rtc/rtc-ds1307.txt
index eebfbe0420..eaee19b609 100644
--- a/dts/Bindings/rtc/rtc-ds1307.txt
+++ b/dts/Bindings/rtc/rtc-ds1307.txt
@@ -35,7 +35,7 @@ Optional properties:
 	Should be given if internal trickle charger diode should be disabled
 
 Example:
-	rtc1: ds1339@68 {
+	ds1339: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		interrupt-parent = <&gpio4>;
diff --git a/dts/Bindings/rtc/rtc.txt b/dts/Bindings/rtc/rtc.txt
new file mode 100644
index 0000000000..7c8da69260
--- /dev/null
+++ b/dts/Bindings/rtc/rtc.txt
@@ -0,0 +1,64 @@
+Generic device tree bindings for Real Time Clock devices
+========================================================
+
+This document describes generic bindings which can be used to describe Real Time
+Clock devices in a device tree.
+
+Required properties
+-------------------
+
+- compatible : name of RTC device following generic names recommended practice.
+
+For other required properties e.g. to describe register sets,
+clocks, etc. check the binding documentation of the specific driver.
+
+Optional properties
+-------------------
+
+- start-year : if provided, the default hardware range supported by the RTC is
+               shifted so the first usable year is the specified one.
+
+The following properties may not be supported by all drivers. However, if a
+driver wants to support one of the below features, it should adapt the bindings
+below.
+- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given
+                          if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode Should be
+                          given if internal trickle charger diode should be
+                          disabled
+- wakeup-source :         Enables wake up of host system on alarm
+
+Trivial RTCs
+------------
+
+This is a list of trivial RTC devices that have simple device tree
+bindings, consisting only of a compatible field, an address and
+possibly an interrupt line.
+
+
+Compatible		Vendor / Chip
+==========		=============
+abracon,abb5zes3	AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
+dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
+dallas,ds1672		Dallas DS1672 Real-time Clock
+dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
+epson,rx8010		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+emmicro,em3027		EM Microelectronic EM3027 Real-time Clock
+isil,isl1208		Intersil ISL1208 Low Power RTC with Battery Backed SRAM
+isil,isl1218		Intersil ISL1218 Low Power RTC with Battery Backed SRAM
+isil,isl12022		Intersil ISL12022 Real-time Clock
+microcrystal,rv3029	Real Time Clock Module with I2C-Bus
+nxp,pcf2127		Real-time clock
+nxp,pcf2129		Real-time clock
+nxp,pcf8523		Real-time Clock
+nxp,pcf8563		Real-time clock/calendar
+nxp,pcf85063		Tiny Real-Time Clock
+pericom,pt7c4338	Real-time Clock Module
+ricoh,r2025sd		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,r2221tl		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rs5c372b		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rv5c386		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rv5c387a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+sii,s35390a		2-wire CMOS real-time clock
diff --git a/dts/Bindings/rtc/sun6i-rtc.txt b/dts/Bindings/rtc/sun6i-rtc.txt
index 12c083c114..6b732c4139 100644
--- a/dts/Bindings/rtc/sun6i-rtc.txt
+++ b/dts/Bindings/rtc/sun6i-rtc.txt
@@ -3,25 +3,44 @@
 RTC controller for the Allwinner A31
 
 Required properties:
-- compatible	: Should be "allwinner,sun6i-a31-rtc"
+- compatible	: Should be one of the following combinations:
+		    - "allwinner,sun6i-a31-rtc"
+		    - "allwinner,sun8i-a23-rtc"
+		    - "allwinner,sun8i-h3-rtc"
+		    - "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc"
+		    - "allwinner,sun8i-v3-rtc"
+		    - "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc"
+		    - "allwinner,sun50i-h5-rtc"
+
+		  Where there are two or more compatible strings, this
+		  denotes the hardware covered by the most specific one
+		  is backward-compatible with the latter ones, and the
+		  implementation for the latter ones can be used, albeit
+		  with reduced functionality.
+
 - reg		: physical base address of the controller and length of
 		  memory mapped region.
 - interrupts	: IRQ lines for the RTC alarm 0 and alarm 1, in that order.
 
 Required properties for new device trees
 - clocks	: phandle to the 32kHz external oscillator
-- clock-output-names : names of the LOSC and its external output clocks created
-- #clock-cells  : must be equals to 1. The RTC provides two clocks: the
-		  LOSC and its external output, with index 0 and 1
-		  respectively.
+- clock-output-names : names of up to three clock outputs. See below.
+- #clock-cells  : must be equal to 1.
+
+The RTC provides the following clocks at the given indices:
+- 0: LOSC
+- 1: LOSC external output, known as X32KFOUT in the datasheet.
+     This clock is not available on the A31 and is deprecated for old
+     device trees still using the "allwinner,sun6i-a31-rtc" compatible.
+- 2: InternalOSC, or internal RC oscillator (A64/H3/H5 only)
 
 Example:
 
 rtc: rtc@1f00000 {
 	compatible = "allwinner,sun6i-a31-rtc";
-	reg = <0x01f00000 0x54>;
+	reg = <0x01f00000 0x400>;
 	interrupts = <0 40 4>, <0 41 4>;
-	clock-output-names = "osc32k", "osc32k-out";
+	clock-output-names = "osc32k";
 	clocks = <&ext_osc32k>;
 	#clock-cells = <1>;
 };