dts: update to v4.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 27 insertions, 12 deletions

diff --git a/dts/Bindings/rtc/nxp,rtc-2123.txt b/dts/Bindings/rtc/nxp,rtc-2123.txt
index 5cbc0b145a..811124a36d 100644
--- a/dts/Bindings/rtc/nxp,rtc-2123.txt
+++ b/dts/Bindings/rtc/nxp,rtc-2123.txt
@@ -9,7 +9,7 @@ Optional properties:
 
 Example:
 
-rtc: nxp,rtc-pcf2123@3 {
+pcf2123: rtc@3 {
 	compatible = "nxp,rtc-pcf2123"
 	reg = <3>
 	spi-cs-high;
diff --git a/dts/Bindings/rtc/st,stm32-rtc.txt b/dts/Bindings/rtc/st,stm32-rtc.txt
index a66692a08a..c920e27369 100644
--- a/dts/Bindings/rtc/st,stm32-rtc.txt
+++ b/dts/Bindings/rtc/st,stm32-rtc.txt
@@ -1,23 +1,29 @@
 STM32 Real Time Clock
 
 Required properties:
-- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
-  the device is compatible with stm32(f4/f7) or stm32h7.
+- compatible: can be one of the following:
+  - "st,stm32-rtc" for devices compatible with stm32(f4/f7).
+  - "st,stm32h7-rtc" for devices compatible with stm32h7.
+  - "st,stm32mp1-rtc" for devices compatible with stm32mp1.
 - reg: address range of rtc register set.
 - clocks: can use up to two clocks, depending on part used:
   - "rtc_ck": RTC clock source.
-    It is required on stm32(f4/f7) and stm32h7.
   - "pclk": RTC APB interface clock.
     It is not present on stm32(f4/f7).
-    It is required on stm32h7.
+    It is required on stm32(h7/mp1).
 - clock-names: must be "rtc_ck" and "pclk".
-    It is required only on stm32h7.
+    It is required on stm32(h7/mp1).
 - interrupt-parent: phandle for the interrupt controller.
-- interrupts: rtc alarm interrupt.
-- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
-  (RTC registers) write protection.
+    It is required on stm32(f4/f7/h7).
+- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required
+  for rtc alarm wakeup interrupt.
+- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
+  access control register at offset, and change the dbp (Disable Backup
+  Protection) bit represented by the mask, mandatory to disable/enable backup
+  domain (RTC registers) write protection.
+    It is required on stm32(f4/f7/h7).
 
-Optional properties (to override default rtc_ck parent clock):
+Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7):
 - assigned-clocks: reference to the rtc_ck clock entry.
 - assigned-clock-parents: phandle of the new parent clock of rtc_ck.
 
@@ -31,7 +37,7 @@ Example:
 		assigned-clock-parents = <&rcc 1 CLK_LSE>;
 		interrupt-parent = <&exti>;
 		interrupts = <17 1>;
-		st,syscfg = <&pwrcfg>;
+		st,syscfg = <&pwrcfg 0x00 0x100>;
 	};
 
 	rtc: rtc@58004000 {
@@ -44,5 +50,14 @@ Example:
 		interrupt-parent = <&exti>;
 		interrupts = <17 1>;
 		interrupt-names = "alarm";
-		st,syscfg = <&pwrcfg>;
+		st,syscfg = <&pwrcfg 0x00 0x100>;
+	};
+
+	rtc: rtc@5c004000 {
+		compatible = "st,stm32mp1-rtc";
+		reg = <0x5c004000 0x400>;
+		clocks = <&rcc RTCAPB>, <&rcc RTC>;
+		clock-names = "pclk", "rtc_ck";
+		interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>,
+				      <&exti 19 1>;
 	};