dts: update to v6.0-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 59 deletions

diff --git a/dts/Bindings/serial/mtk-uart.txt b/dts/Bindings/serial/mtk-uart.txt
deleted file mode 100644
index 113b5d6a22..0000000000
--- a/dts/Bindings/serial/mtk-uart.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2701-uart" for MT2701 compatible UARTS
-  * "mediatek,mt2712-uart" for MT2712 compatible UARTS
-  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
-  * "mediatek,mt6582-uart" for MT6582 compatible UARTS
-  * "mediatek,mt6589-uart" for MT6589 compatible UARTS
-  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
-  * "mediatek,mt6765-uart" for MT6765 compatible UARTS
-  * "mediatek,mt6779-uart" for MT6779 compatible UARTS
-  * "mediatek,mt6795-uart" for MT6795 compatible UARTS
-  * "mediatek,mt6797-uart" for MT6797 compatible UARTS
-  * "mediatek,mt7622-uart" for MT7622 compatible UARTS
-  * "mediatek,mt7623-uart" for MT7623 compatible UARTS
-  * "mediatek,mt7629-uart" for MT7629 compatible UARTS
-  * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
-  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
-  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
-  * "mediatek,mt8173-uart" for MT8173 compatible UARTS
-  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
-  * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS
-  * "mediatek,mt8516-uart" for MT8516 compatible UARTS
-  * "mediatek,mt6577-uart" for MT6577 and all of the above
-
-- reg: The base address of the UART register bank.
-
-- interrupts:
-  index 0: an interrupt specifier for the UART controller itself
-  index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
-           support Rx in-band wake up. If one would like to use this feature,
-           one must create an addtional pinctrl to reconfigure Rx pin to normal
-           GPIO before suspend.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names:
-  - "baud": The clock the baudrate is derived from
-  - "bus": The bus clock for register accesses (optional)
-
-For compatibility with older device trees an unnamed clock is used for the
-baud clock if the baudclk does not exist. Do not use this for new designs.
-
-Example:
-
-	uart0: serial@11006000 {
-		compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
-		reg = <0x11006000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
-		clocks = <&uart_clk>, <&bus_clk>;
-		clock-names = "baud", "bus";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&uart_pin>;
-		pinctrl-1 = <&uart_pin_sleep>;
-	};