summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/serial/sirf-uart.txt
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-04-25 11:22:32 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-04-28 09:08:46 +0200
commit00ce25c6dcdae5582ae4be37147ab33678adc995 (patch)
tree41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/serial/sirf-uart.txt
parent0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff)
downloadbarebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz
barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/serial/sirf-uart.txt')
-rw-r--r--dts/Bindings/serial/sirf-uart.txt33
1 files changed, 33 insertions, 0 deletions
diff --git a/dts/Bindings/serial/sirf-uart.txt b/dts/Bindings/serial/sirf-uart.txt
new file mode 100644
index 0000000000..a2dfc6522a
--- /dev/null
+++ b/dts/Bindings/serial/sirf-uart.txt
@@ -0,0 +1,33 @@
+* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter *
+
+Required properties:
+- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain uart interrupt
+- fifosize : Should define hardware rx/tx fifo size
+- clocks : Should contain uart clock number
+
+Optional properties:
+- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware
+- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true
+- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true
+
+Example:
+
+uart0: uart@b0050000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0050000 0x1000>;
+ interrupts = <17>;
+ fifosize = <128>;
+ clocks = <&clks 13>;
+};
+
+On the board-specific dts, we can put rts-gpios and cts-gpios like
+
+usp@b0090000 {
+ compatible = "sirf,prima2-usp-uart";
+ sirf,uart-has-rtscts;
+ rts-gpios = <&gpio 15 0>;
+ cts-gpios = <&gpio 46 0>;
+};