dts: update to v4.9-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 46 insertions, 0 deletions

diff --git a/dts/Bindings/serial/st,stm32-usart.txt b/dts/Bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000000..85ec5f2b19
--- /dev/null
+++ b/dts/Bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,46 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart", "st,stm32-uart",
+"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether
+the device supports synchronous mode and is compatible with
+stm32(f4) or stm32f7.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+- dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt
+- dma-names: "rx" and/or "tx"
+
+Examples:
+usart4: serial@40004c00 {
+	compatible = "st,stm32-uart";
+	reg = <0x40004c00 0x400>;
+	interrupts = <52>;
+	clocks = <&clk_pclk1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial@40004400 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40004400 0x400>;
+	interrupts = <38>;
+	clocks = <&clk_pclk1>;
+	st,hw-flow-ctrl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
+
+usart1: serial@40011000 {
+	compatible = "st,stm32-usart", "st,stm32-uart";
+	reg = <0x40011000 0x400>;
+	interrupts = <37>;
+	clocks = <&rcc 0 164>;
+	dmas = <&dma2 2 4 0x414 0x0>,
+	       <&dma2 7 4 0x414 0x0>;
+	dma-names = "rx", "tx";
+};