dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 28 insertions, 22 deletions

diff --git a/dts/Bindings/soc/fsl/qman-portals.txt b/dts/Bindings/soc/fsl/qman-portals.txt
index 47e46ccbc1..5a34f3ab7b 100644
--- a/dts/Bindings/soc/fsl/qman-portals.txt
+++ b/dts/Bindings/soc/fsl/qman-portals.txt
@@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
 CONTENTS
 
 	- QMan Portal
-	- QMan Pool Channel
 	- Example
 
 QMan Portal Node
@@ -82,25 +81,6 @@ These subnodes should have the following properties:
 	Definition:	The phandle to the particular hardware device that this
 			portal is connected to.
 
-DPAA QMan Pool Channel Nodes
-
-Pool Channels are defined with the following properties.
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-pool-channel"
-			May include "fsl,<SoC>-qman-pool-channel"
-
-- fsl,qman-channel-id
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
 EXAMPLE
 
 The example below shows a (P4080) QMan portals container/bus node with two portals
diff --git a/dts/Bindings/soc/rockchip/grf.txt b/dts/Bindings/soc/rockchip/grf.txt
index 013e71a2cd..a0685c2092 100644
--- a/dts/Bindings/soc/rockchip/grf.txt
+++ b/dts/Bindings/soc/rockchip/grf.txt
@@ -5,20 +5,24 @@ is composed of many registers for system control.
 
 From RK3368 SoCs, the GRF is divided into two sections,
 - GRF, used for general non-secure system,
+- SGRF, used for general secure system,
 - PMUGRF, used for always on system
 
 Required Properties:
 
-- compatible: GRF should be one of the followings
+- compatible: GRF should be one of the following:
+   - "rockchip,rk3036-grf", "syscon": for rk3036
    - "rockchip,rk3066-grf", "syscon": for rk3066
    - "rockchip,rk3188-grf", "syscon": for rk3188
    - "rockchip,rk3228-grf", "syscon": for rk3228
    - "rockchip,rk3288-grf", "syscon": for rk3288
    - "rockchip,rk3368-grf", "syscon": for rk3368
    - "rockchip,rk3399-grf", "syscon": for rk3399
-- compatible: PMUGRF should be one of the followings
+- compatible: PMUGRF should be one of the following:
    - "rockchip,rk3368-pmugrf", "syscon": for rk3368
    - "rockchip,rk3399-pmugrf", "syscon": for rk3399
+- compatible: SGRF should be one of the following
+   - "rockchip,rk3288-sgrf", "syscon": for rk3288
 - reg: physical base address of the controller and length of memory mapped
   region.
 
diff --git a/dts/Bindings/soc/rockchip/power_domain.txt b/dts/Bindings/soc/rockchip/power_domain.txt
index f909ce06af..01bfb6745f 100644
--- a/dts/Bindings/soc/rockchip/power_domain.txt
+++ b/dts/Bindings/soc/rockchip/power_domain.txt
@@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power.
 Required properties for power domain controller:
 - compatible: Should be one of the following.
 	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
+	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
 	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
 	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
 - #power-domain-cells: Number of cells in a power-domain specifier.
@@ -16,6 +17,7 @@ Required properties for power domain controller:
 Required properties for power domain sub nodes:
 - reg: index of the power domain, should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
 	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
 	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
 - clocks (optional): phandles to clocks which need to be enabled while power domain
@@ -90,6 +92,7 @@ containing a phandle to the power device node and an index specifying which
 power domain to use.
 The index should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
+	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
 	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
 	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
 
diff --git a/dts/Bindings/soc/zte/pd-2967xx.txt b/dts/Bindings/soc/zte/pd-2967xx.txt
new file mode 100644
index 0000000000..7629de1c2c
--- /dev/null
+++ b/dts/Bindings/soc/zte/pd-2967xx.txt
@@ -0,0 +1,19 @@
+* ZTE zx2967 family Power Domains
+
+zx2967 family includes support for multiple power domains which are used
+to gate power to one or more peripherals on the processor.
+
+Required Properties:
+  - compatible: should be one of the following.
+      * zte,zx296718-pcu - for zx296718 power domain.
+  - reg: physical base address of the controller and length of memory mapped
+      region.
+  - #power-domain-cells: Must be 1.
+
+Example:
+
+	pcu_domain: pcu@117000 {
+		compatible = "zte,zx296718-pcu";
+		reg = <0x00117000 0x1000>;
+		#power-domain-cells = <1>;
+	};