Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 43 insertions, 0 deletions

diff --git a/dts/Bindings/sound/max98090.txt b/dts/Bindings/sound/max98090.txt
new file mode 100644
index 0000000000..e4c8b36dcf
--- /dev/null
+++ b/dts/Bindings/sound/max98090.txt
@@ -0,0 +1,43 @@
+MAX98090 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98090".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Pins on the device (for linking into audio routes):
+
+  * MIC1
+  * MIC2
+  * DMICL
+  * DMICR
+  * IN1
+  * IN2
+  * IN3
+  * IN4
+  * IN5
+  * IN6
+  * IN12
+  * IN34
+  * IN56
+  * HPL
+  * HPR
+  * SPKL
+  * SPKR
+  * RCVL
+  * RCVR
+  * MICBIAS
+
+Example:
+
+audio-codec@10 {
+	compatible = "maxim,max98090";
+	reg = <0x10>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+};