summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/sound
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2020-02-14 09:05:53 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2020-02-18 08:32:25 +0100
commit81ce4a7dec8ba066c73692e10634091b14c1e494 (patch)
treed61574b25fda47711e3efab57c7a5739de477565 /dts/Bindings/sound
parent84b7f86bef670f6751d67131738555fa53ca3f6b (diff)
downloadbarebox-81ce4a7dec8ba066c73692e10634091b14c1e494.tar.gz
dts: update to v5.6-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/sound')
-rw-r--r--dts/Bindings/sound/amlogic,axg-fifo.txt4
-rw-r--r--dts/Bindings/sound/fsl,asrc.txt12
-rw-r--r--dts/Bindings/sound/gtm601.txt10
-rw-r--r--dts/Bindings/sound/ingenic,codec.yaml55
-rw-r--r--dts/Bindings/sound/ingenic,jz4725b-codec.txt20
-rw-r--r--dts/Bindings/sound/ingenic,jz4740-codec.txt20
-rw-r--r--dts/Bindings/sound/qcom,sdm845.txt5
-rw-r--r--dts/Bindings/sound/qcom,wcd934x.yaml175
-rw-r--r--dts/Bindings/sound/qcom,wsa881x.yaml68
-rw-r--r--dts/Bindings/sound/rt1015.txt17
-rw-r--r--dts/Bindings/sound/rt5645.txt4
11 files changed, 346 insertions, 44 deletions
diff --git a/dts/Bindings/sound/amlogic,axg-fifo.txt b/dts/Bindings/sound/amlogic,axg-fifo.txt
index 3080979..fa4545e 100644
--- a/dts/Bindings/sound/amlogic,axg-fifo.txt
+++ b/dts/Bindings/sound/amlogic,axg-fifo.txt
@@ -17,6 +17,9 @@ Required properties:
* "arb" : memory ARB line (required)
* "rst" : dedicated device reset line (optional)
- #sound-dai-cells: must be 0.
+- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
+ is useful for determining certain configuration such
+ as the flush threshold of the fifo
Example of FRDDR A on the A113 SoC:
@@ -27,4 +30,5 @@ frddr_a: audio-controller@1c0 {
interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>;
+ fifo-depth = <512>;
};
diff --git a/dts/Bindings/sound/fsl,asrc.txt b/dts/Bindings/sound/fsl,asrc.txt
index 1d4d9f9..cb9a251 100644
--- a/dts/Bindings/sound/fsl,asrc.txt
+++ b/dts/Bindings/sound/fsl,asrc.txt
@@ -8,7 +8,12 @@ three substreams within totally 10 channels.
Required properties:
- - compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+ - compatible : Compatible list, should contain one of the following
+ compatibles:
+ "fsl,imx35-asrc",
+ "fsl,imx53-asrc",
+ "fsl,imx8qm-asrc",
+ "fsl,imx8qxp-asrc",
- reg : Offset and length of the register set for the device.
@@ -35,6 +40,11 @@ Required properties:
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
+ - fsl,asrc-clk-map : Defines clock map used in driver. which is required
+ by imx8qm/imx8qxp platform
+ <0> - select the map for asrc0 in imx8qm/imx8qxp
+ <1> - select the map for asrc1 in imx8qm/imx8qxp
+
Optional properties:
- big-endian : If this property is absent, the little endian mode
diff --git a/dts/Bindings/sound/gtm601.txt b/dts/Bindings/sound/gtm601.txt
index 5efc8c0..efa32a4 100644
--- a/dts/Bindings/sound/gtm601.txt
+++ b/dts/Bindings/sound/gtm601.txt
@@ -1,10 +1,16 @@
GTM601 UMTS modem audio interface CODEC
-This device has no configuration interface. Sample rate is fixed - 8kHz.
+This device has no configuration interface. The sample rate and channels are
+based on the compatible string
+ "option,gtm601" = 8kHz mono
+ "broadmobi,bm818" = 48KHz stereo
Required properties:
- - compatible : "option,gtm601"
+ - compatible : one of
+ "option,gtm601"
+ "broadmobi,bm818"
+
Example:
diff --git a/dts/Bindings/sound/ingenic,codec.yaml b/dts/Bindings/sound/ingenic,codec.yaml
new file mode 100644
index 0000000..eb4be86
--- /dev/null
+++ b/dts/Bindings/sound/ingenic,codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx internal codec DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: '^audio-codec@.*'
+
+ compatible:
+ oneOf:
+ - const: ingenic,jz4770-codec
+ - const: ingenic,jz4725b-codec
+ - const: ingenic,jz4740-codec
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: aic
+
+ '#sound-dai-cells':
+ const: 0
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#sound-dai-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4740-cgu.h>
+ codec: audio-codec@10020080 {
+ compatible = "ingenic,jz4740-codec";
+ reg = <0x10020080 0x8>;
+ #sound-dai-cells = <0>;
+ clocks = <&cgu JZ4740_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+...
diff --git a/dts/Bindings/sound/ingenic,jz4725b-codec.txt b/dts/Bindings/sound/ingenic,jz4725b-codec.txt
deleted file mode 100644
index 05adc0d..0000000
--- a/dts/Bindings/sound/ingenic,jz4725b-codec.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ingenic JZ4725B codec controller
-
-Required properties:
-- compatible : "ingenic,jz4725b-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@100200a4 {
- compatible = "ingenic,jz4725b-codec";
- reg = <0x100200a4 0x8>;
-
- #sound-dai-cells = <0>;
-
- clocks = <&cgu JZ4725B_CLK_AIC>;
- clock-names = "aic";
-};
diff --git a/dts/Bindings/sound/ingenic,jz4740-codec.txt b/dts/Bindings/sound/ingenic,jz4740-codec.txt
deleted file mode 100644
index 1ffcade..0000000
--- a/dts/Bindings/sound/ingenic,jz4740-codec.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ingenic JZ4740 codec controller
-
-Required properties:
-- compatible : "ingenic,jz4740-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@10020080 {
- compatible = "ingenic,jz4740-codec";
- reg = <0x10020080 0x8>;
-
- #sound-dai-cells = <0>;
-
- clocks = <&cgu JZ4740_CLK_AIC>;
- clock-names = "aic";
-};
diff --git a/dts/Bindings/sound/qcom,sdm845.txt b/dts/Bindings/sound/qcom,sdm845.txt
index 408c483..ca8c89e 100644
--- a/dts/Bindings/sound/qcom,sdm845.txt
+++ b/dts/Bindings/sound/qcom,sdm845.txt
@@ -5,7 +5,10 @@ This binding describes the SDM845 sound card, which uses qdsp for audio.
- compatible:
Usage: required
Value type: <stringlist>
- Definition: must be "qcom,sdm845-sndcard"
+ Definition: must be one of this
+ "qcom,sdm845-sndcard"
+ "qcom,db845c-sndcard"
+ "lenovo,yoga-c630-sndcard"
- audio-routing:
Usage: Optional
diff --git a/dts/Bindings/sound/qcom,wcd934x.yaml b/dts/Bindings/sound/qcom,wcd934x.yaml
new file mode 100644
index 0000000..38eaf0c
--- /dev/null
+++ b/dts/Bindings/sound/qcom,wcd934x.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
+ It has in-built Soundwire controller, pin controller, interrupt mux and
+ supports both I2S/I2C and SLIMbus audio interfaces.
+
+properties:
+ compatible:
+ const: slim217,250
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO spec for reset line to use
+ maxItems: 1
+
+ slim-ifc-dev: true
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: extclk
+
+ vdd-buck-supply:
+ description: A reference to the 1.8V buck supply
+
+ vdd-buck-sido-supply:
+ description: A reference to the 1.8V SIDO buck supply
+
+ vdd-rx-supply:
+ description: A reference to the 1.8V rx supply
+
+ vdd-tx-supply:
+ description: A reference to the 1.8V tx supply
+
+ vdd-vbat-supply:
+ description: A reference to the vbat supply
+
+ vdd-io-supply:
+ description: A reference to the 1.8V I/O supply
+
+ vdd-micbias-supply:
+ description: A reference to the micbias supply
+
+ qcom,micbias1-microvolt:
+ description: micbias1 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias2-microvolt:
+ description: micbias2 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias3-microvolt:
+ description: micbias3 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias4-microvolt:
+ description: micbias4 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ clock-output-names:
+ const: mclk
+
+ clock-frequency:
+ description: Clock frequency of output clk in Hz
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ '#clock-cells':
+ const: 0
+
+ '#sound-dai-cells':
+ const: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ gpio@42:
+ type: object
+ allOf:
+ - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+ description: |
+ WCD934x subnode for each slave devices. Bindings of each subnodes
+ depends on the specific driver providing the functionality and
+ documented in their respective bindings.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - slim-ifc-dev
+ - interrupts
+ - interrupt-controller
+ - clock-frequency
+ - clock-output-names
+ - qcom,micbias1-microvolt
+ - qcom,micbias2-microvolt
+ - qcom,micbias3-microvolt
+ - qcom,micbias4-microvolt
+ - "#interrupt-cells"
+ - "#clock-cells"
+ - "#sound-dai-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ codec@1,0{
+ compatible = "slim217,250";
+ reg = <1 0>;
+ reset-gpios = <&tlmm 64 0>;
+ slim-ifc-dev = <&wcd9340_ifd>;
+ #sound-dai-cells = <1>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <54 4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ clock-names = "extclk";
+ clocks = <&rpmhcc 2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpio@42 {
+ compatible = "qcom,wcd9340-gpio";
+ reg = <0x42 0x2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+...
diff --git a/dts/Bindings/sound/qcom,wsa881x.yaml b/dts/Bindings/sound/qcom,wsa881x.yaml
new file mode 100644
index 0000000..ea44d03
--- /dev/null
+++ b/dts/Bindings/sound/qcom,wsa881x.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ WSA8810 is a class-D smart speaker amplifier and WSA8815
+ is a high-output power class-D smart speaker amplifier.
+ Their primary operating mode uses a SoundWire digital audio
+ interface. This binding is for SoundWire interface.
+
+properties:
+ compatible:
+ const: sdw10217201000
+
+ reg:
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO spec for Powerdown/Shutdown line to use
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ const: 0
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - powerdown-gpios
+ - "#thermal-sensor-cells"
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soundwire@c2d0000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x0c2d0000 0x2000>;
+
+ speaker@0,1 {
+ compatible = "sdw10217201000";
+ reg = <0 1>;
+ powerdown-gpios = <&wcdpinctrl 2 0>;
+ #thermal-sensor-cells = <0>;
+ #sound-dai-cells = <0>;
+ };
+
+ speaker@0,2 {
+ compatible = "sdw10217201000";
+ reg = <0 2>;
+ powerdown-gpios = <&wcdpinctrl 2 0>;
+ #thermal-sensor-cells = <0>;
+ #sound-dai-cells = <0>;
+ };
+ };
+
+...
diff --git a/dts/Bindings/sound/rt1015.txt b/dts/Bindings/sound/rt1015.txt
new file mode 100644
index 0000000..fcfd02d
--- /dev/null
+++ b/dts/Bindings/sound/rt1015.txt
@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+ compatible = "realtek,rt1015";
+ reg = <0x28>;
+};
diff --git a/dts/Bindings/sound/rt5645.txt b/dts/Bindings/sound/rt5645.txt
index a03f9a8..41a62fd 100644
--- a/dts/Bindings/sound/rt5645.txt
+++ b/dts/Bindings/sound/rt5645.txt
@@ -10,6 +10,10 @@ Required properties:
- interrupts : The CODEC's interrupt output.
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
Optional properties:
- hp-detect-gpios: