dts: update to v4.9-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

13 files changed, 362 insertions, 114 deletions

diff --git a/dts/Bindings/sound/nau8810.txt b/dts/Bindings/sound/nau8810.txt
new file mode 100644
index 0000000000..05830e477a
--- /dev/null
+++ b/dts/Bindings/sound/nau8810.txt
@@ -0,0 +1,16 @@
+NAU8810 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8810"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8810@1a {
+	compatible = "nuvoton,nau8810";
+	reg = <0x1a>;
+};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt
new file mode 100644
index 0000000000..5da7da4ea0
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt
@@ -0,0 +1,42 @@
+NVIDIA Tegra audio complex, with SGTL5000 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-sgtl5000"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the SGTL5000's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphone Jack
+  * Line In Jack
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the SGTL5000 audio codec.
+
+Example:
+
+sound {
+	compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+		     "nvidia,tegra-audio-sgtl5000";
+	nvidia,model = "Toradex Apalis T30";
+	nvidia,audio-routing =
+		"Headphone Jack", "HP_OUT",
+		"LINE_IN", "Line In Jack",
+		"MIC_IN", "Mic Jack";
+	nvidia,i2s-controller = <&tegra_i2s2>;
+	nvidia,audio-codec = <&sgtl5000>;
+	clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+		 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+		 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};
diff --git a/dts/Bindings/sound/qcom,apq8016-sbc.txt b/dts/Bindings/sound/qcom,apq8016-sbc.txt
index 48129368d4..d9d8635ff9 100644
--- a/dts/Bindings/sound/qcom,apq8016-sbc.txt
+++ b/dts/Bindings/sound/qcom,apq8016-sbc.txt
@@ -16,6 +16,24 @@ Required properties:
 				* "spkr-iomux"
 - qcom,model		: Name of the sound card.
 
+- qcom,audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, MicBias
+			  of msm8x16_wcd codec and the jacks on the board:
+
+			  Power supplies:
+			  * MIC BIAS External1
+			  * MIC BIAS External2
+			  * MIC BIAS Internal1
+			  * MIC BIAS Internal2
+
+			  Board connectors:
+			  * Headset Mic
+			  * Secondary Mic",
+			  * DMIC
+			  * Ext Spk
+
 Dai-link subnode properties and subnodes:
 
 Required dai-link subnodes:
@@ -37,6 +55,18 @@ sound: sound {
 	reg-names = "mic-iomux", "spkr-iomux";
 	qcom,model = "DB410c";
 
+	qcom,audio-routing =
+		"MIC BIAS External1", "Handset Mic",
+		"MIC BIAS Internal2", "Headset Mic",
+		"MIC BIAS External1", "Secondary Mic",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1",
+		"DMIC1", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic1",
+		"DMIC2", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic2";
+
 	/* I2S - Internal codec */
 	internal-dai-link@0 {
 		cpu { /* PRIMARY */
diff --git a/dts/Bindings/sound/renesas,rsrc-card.txt b/dts/Bindings/sound/renesas,rsrc-card.txt
deleted file mode 100644
index 255ece3043..0000000000
--- a/dts/Bindings/sound/renesas,rsrc-card.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Renesas Sampling Rate Convert Sound Card:
-
-Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC <-> codec.
-
-Required properties:
-
-- compatible				: "renesas,rsrc-card{,<board>}"
-					  Examples with boards are:
-					    - "renesas,rsrc-card"
-					    - "renesas,rsrc-card,lager"
-					    - "renesas,rsrc-card,koelsch"
-Optional properties:
-
-- card_name				: User specified audio sound card name, one string
-					  property.
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Optional subnode properties:
-
-- format				: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- frame-master				: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- bitclock-master			: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- bitclock-inversion			: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- frame-inversion			: bool property. Add this if the
-					  dai-link uses frame clock inversion.
-- convert-rate				: platform specified sampling rate convert
-- convert-channels			: platform specified converted channel size (2 - 8 ch)
-- audio-prefix				: see audio-routing
-- audio-routing				: A list of the connections between audio components.
-					  Each entry is a pair of strings, the first being the connection's sink,
-					  the second being the connection's source. Valid names for sources.
-					  use audio-prefix if some components is using same sink/sources naming.
-					  it can be used if compatible was "renesas,rsrc-card";
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai				: phandle and port of CPU/CODEC
-
-Optional CPU/CODEC subnodes properties:
-
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
-
-Example
-
-sound {
-	compatible = "renesas,rsrc-card,lager";
-
-	card-name = "rsnd-ak4643";
-	format = "left_j";
-	bitclock-master = <&sndcodec>;
-	frame-master = <&sndcodec>;
-
-	sndcpu: cpu {
-		sound-dai = <&rcar_sound>;
-	};
-
-	sndcodec: codec {
-		sound-dai = <&ak4643>;
-		system-clock-frequency = <11289600>;
-	};
-};
diff --git a/dts/Bindings/sound/rockchip,rk3399-gru-sound.txt b/dts/Bindings/sound/rockchip,rk3399-gru-sound.txt
new file mode 100644
index 0000000000..eac91db071
--- /dev/null
+++ b/dts/Bindings/sound/rockchip,rk3399-gru-sound.txt
@@ -0,0 +1,22 @@
+ROCKCHIP with MAX98357A/RT5514/DA7219 codecs on GRU boards
+
+Required properties:
+- compatible: "rockchip,rk3399-gru-sound"
+- rockchip,cpu: The phandle of the Rockchip I2S controller that's
+  connected to the codecs
+- rockchip,codec: The phandle of the MAX98357A/RT5514/DA7219 codecs
+
+Optional properties:
+- dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready.
+  If this option is specified, which means it's required dmic need
+  delay for DMIC to ready so that rt5514 can avoid recording before
+  DMIC send valid data
+
+Example:
+
+sound {
+	compatible = "rockchip,rk3399-gru-sound";
+	rockchip,cpu = <&i2s0>;
+	rockchip,codec = <&max98357a &rt5514 &da7219>;
+	dmic-wakeup-delay-ms = <20>;
+};
diff --git a/dts/Bindings/sound/rt5659.txt b/dts/Bindings/sound/rt5659.txt
index 5f79e7fde0..1766e0543f 100644
--- a/dts/Bindings/sound/rt5659.txt
+++ b/dts/Bindings/sound/rt5659.txt
@@ -12,6 +12,9 @@ Required properties:
 
 Optional properties:
 
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
 - realtek,in1-differential
 - realtek,in3-differential
 - realtek,in4-differential
diff --git a/dts/Bindings/sound/rt5660.txt b/dts/Bindings/sound/rt5660.txt
new file mode 100644
index 0000000000..30be5f9219
--- /dev/null
+++ b/dts/Bindings/sound/rt5660.txt
@@ -0,0 +1,47 @@
+RT5660 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5660".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in3-differential
+  Boolean. Indicate MIC1/3 input are differential, rather than single-ended.
+
+- realtek,poweroff-in-suspend
+  Boolean. If the codec will be powered off in suspend, the resume should be
+  added delay time for waiting codec power ready.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO2 pin as dmic1 data pin
+  2: using IN1P pin as dmic1 data pin
+
+Pins on the device (for linking into audio routes) for RT5660:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN3P
+  * IN3N
+  * SPO
+  * LOUTL
+  * LOUTR
+
+Example:
+
+rt5660 {
+	compatible = "realtek,rt5660";
+	reg = <0x1c>;
+};
diff --git a/dts/Bindings/sound/rt5663.txt b/dts/Bindings/sound/rt5663.txt
new file mode 100644
index 0000000000..7d3c974c6e
--- /dev/null
+++ b/dts/Bindings/sound/rt5663.txt
@@ -0,0 +1,30 @@
+RT5663/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5663" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+Pins on the device (for linking into audio routes) for RT5663/RT5668:
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * HPOL
+  * HPOR
+
+Example:
+
+codec: rt5663@12 {
+	compatible = "realtek,rt5663";
+	reg = <0x12>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/dts/Bindings/sound/simple-card.txt b/dts/Bindings/sound/simple-card.txt
index 59d862801e..c7a93931fa 100644
--- a/dts/Bindings/sound/simple-card.txt
+++ b/dts/Bindings/sound/simple-card.txt
@@ -22,6 +22,8 @@ Optional properties:
 					  headphones are attached.
 - simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
 					  a microphone is attached.
+- simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
+					  as amplifiers, to be added to the sound card.
 
 Optional subnodes:
 
@@ -162,3 +164,38 @@ sound {
 		};
 	};
 };
+
+Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
+through TPA6130A2 amplifier to headphones:
+
+&i2c0 {
+	codec: tlv320dac3100@18 {
+		compatible = "ti,tlv320dac3100";
+		...
+	}
+
+	amp: tpa6130a2@60 {
+		compatible = "ti,tpa6130a2";
+		...
+	}
+}
+
+sound {
+	compatible = "simple-audio-card";
+	...
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Headphone Jack", "HPLEFT",
+		"Headphone Jack", "HPRIGHT",
+		"LEFTIN", "HPL",
+		"RIGHTIN", "HPR";
+	simple-audio-card,aux-devs = <&amp>;
+	simple-audio-card,cpu {
+		sound-dai = <&ssi2>;
+	};
+	simple-audio-card,codec {
+		sound-dai = <&codec>;
+		clocks = ...
+	};
+};
diff --git a/dts/Bindings/sound/simple-scu-card.txt b/dts/Bindings/sound/simple-scu-card.txt
new file mode 100644
index 0000000000..d6fe47ed09
--- /dev/null
+++ b/dts/Bindings/sound/simple-scu-card.txt
@@ -0,0 +1,110 @@
+ASoC simple SCU Sound Card
+
+Simple-Card specifies audio DAI connections of SoC <-> codec.
+
+Required properties:
+
+- compatible				: "simple-scu-audio-card"
+					  "renesas,rsrc-card"
+
+Optional properties:
+
+- simple-audio-card,name		: User specified audio sound card name, one string
+					  property.
+- simple-audio-card,cpu			: CPU   sub-node
+- simple-audio-card,codec		: CODEC sub-node
+
+Optional subnode properties:
+
+- simple-audio-card,format		: CPU/CODEC common audio format.
+					  "i2s", "right_j", "left_j" , "dsp_a"
+					  "dsp_b", "ac97", "pdm", "msb", "lsb"
+- simple-audio-card,frame-master	: Indicates dai-link frame master.
+					  phandle to a cpu or codec subnode.
+- simple-audio-card,bitclock-master	: Indicates dai-link bit clock master.
+					  phandle to a cpu or codec subnode.
+- simple-audio-card,bitclock-inversion	: bool property. Add this if the
+					  dai-link uses bit clock inversion.
+- simple-audio-card,frame-inversion	: bool property. Add this if the
+					  dai-link uses frame clock inversion.
+- simple-audio-card,convert-rate	: platform specified sampling rate convert
+- simple-audio-card,convert-channels	: platform specified converted channel size (2 - 8 ch)
+- simple-audio-card,prefix		: see audio-routing
+- simple-audio-card,routing		: A list of the connections between audio components.
+					  Each entry is a pair of strings, the first being the connection's sink,
+					  the second being the connection's source. Valid names for sources.
+					  use audio-prefix if some components is using same sink/sources naming.
+					  it can be used if compatible was "renesas,rsrc-card";
+
+Required CPU/CODEC subnodes properties:
+
+- sound-dai				: phandle and port of CPU/CODEC
+
+Optional CPU/CODEC subnodes properties:
+
+- clocks / system-clock-frequency	: specify subnode's clock if needed.
+					  it can be specified via "clocks" if system has
+					  clock node (= common clock), or "system-clock-frequency"
+					  (if system doens't support common clock)
+					  If a clock is specified, it is
+					  enabled with clk_prepare_enable()
+					  in dai startup() and disabled with
+					  clk_disable_unprepare() in dai
+					  shutdown().
+
+Example 1. Sampling Rate Covert
+
+sound {
+	compatible = "simple-scu-audio-card";
+
+	simple-audio-card,name = "rsnd-ak4643";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&sndcodec>;
+	simple-audio-card,frame-master = <&sndcodec>;
+
+	simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */
+
+	simple-audio-card,prefix = "ak4642";
+	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+			"DAI0 Capture", "ak4642 Capture";
+
+	sndcpu: simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+
+	sndcodec: simple-audio-card,codec {
+		sound-dai = <&ak4643>;
+		system-clock-frequency = <11289600>;
+	};
+};
+
+Example 2. 2 CPU 1 Codec
+
+sound {
+	compatible = "renesas,rsrc-card";
+
+	card-name = "rsnd-ak4643";
+	format = "left_j";
+	bitclock-master = <&dpcmcpu>;
+	frame-master = <&dpcmcpu>;
+
+	convert-rate = <48000>;  /* see audio_clk_a */
+
+	audio-prefix = "ak4642";
+	audio-routing = "ak4642 Playback", "DAI0 Playback",
+			"ak4642 Playback", "DAI1 Playback";
+
+	dpcmcpu: cpu@0 {
+		sound-dai = <&rcar_sound 0>;
+	};
+
+	cpu@1 {
+		sound-dai = <&rcar_sound 1>;
+	};
+
+	codec {
+		sound-dai = <&ak4643>;
+		clocks = <&audio_clock>;
+	};
+};
diff --git a/dts/Bindings/sound/st,sti-asoc-card.txt b/dts/Bindings/sound/st,sti-asoc-card.txt
index 16bcdfb676..745dc62f76 100644
--- a/dts/Bindings/sound/st,sti-asoc-card.txt
+++ b/dts/Bindings/sound/st,sti-asoc-card.txt
@@ -11,7 +11,9 @@ Documentation/devicetree/bindings/sound/simple-card.txt.
 ---------------------------------------
 
 Required properties:
-  - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
+  - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out",
+		"st,stih407-uni-player-dac", "st,stih407-uni-player-spdif",
+		"st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi",
 
   - st,syscfg: phandle to boot-device system configuration registers
 
@@ -33,32 +35,24 @@ Required properties:
 	"tx" for "st,sti-uni-player" compatibility
 	"rx" for "st,sti-uni-reader" compatibility
 
-  - st,version: IP version integrated in SOC.
-
-  - dai-name: DAI name that describes the IP.
-
-  - st,mode: IP working mode depending on associated codec.
-	"HDMI" connected to HDMI codec and support IEC HDMI formats (player only).
-	"SPDIF" connected to SPDIF codec and support SPDIF formats (player only).
-	"PCM" PCM standard mode for I2S or TDM bus.
-	"TDM" TDM mode for TDM bus.
-
 Required properties ("st,sti-uni-player" compatibility only):
   - clocks: CPU_DAI IP clock source, listed in the same order than the
 	    CPU_DAI properties.
 
-  - st,uniperiph-id: internal SOC IP instance ID.
-
 Optional properties:
   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
 	       external codecs connection.
 
   - pinctrl-names: should contain only one value - "default".
 
+  - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs.
+	Only compartible with IPs in charge of the external I2S/TDM bus.
+	Should be declared depending on associated codec.
+
 Example:
 
-	sti_uni_player1: sti-uni-player@1 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player1: sti-uni-player@0x8D81000 {
+		compatible = "st,stih407-uni-player-hdmi";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -66,15 +60,12 @@ Example:
 		reg = <0x8D81000 0x158>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 3 0 1>;
-		st,dai-name = "Uni Player #1 (I2S)";
 		dma-names = "tx";
-		st,uniperiph-id = <1>;
-		st,version = <5>;
-		st,mode = "TDM";
+		st,tdm-mode = <1>;
 	};
 
-	sti_uni_player2: sti-uni-player@2 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player2: sti-uni-player@0x8D82000 {
+		compatible = "st,stih407-uni-player-pcm-out";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -82,15 +73,11 @@ Example:
 		reg = <0x8D82000 0x158>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 4 0 1>;
-		dai-name = "Uni Player #2 (DAC)";
 		dma-names = "tx";
-		st,uniperiph-id = <2>;
-		st,version = <5>;
-		st,mode = "PCM";
 	};
 
-	sti_uni_player3: sti-uni-player@3 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player3: sti-uni-player@0x8D85000 {
+		compatible = "st,stih407-uni-player-spdif";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -99,14 +86,10 @@ Example:
 		interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 7 0 1>;
 		dma-names = "tx";
-		dai-name = "Uni Player #3 (SPDIF)";
-		st,uniperiph-id = <3>;
-		st,version = <5>;
-		st,mode = "SPDIF";
 	};
 
-	sti_uni_reader1: sti-uni-reader@1 {
-		compatible = "st,sti-uni-reader";
+	sti_uni_reader1: sti-uni-reader@0x8D84000 {
+		compatible = "st,stih407-uni-reader-hdmi";
 		status = "disabled";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -114,9 +97,6 @@ Example:
 		interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 6 0 1>;
 		dma-names = "rx";
-		dai-name = "Uni Reader #1 (HDMI RX)";
-		st,version = <3>;
-		st,mode = "PCM";
 	};
 
 2) sti-sas-codec: internal audio codec IPs driver
diff --git a/dts/Bindings/sound/sunxi,sun4i-spdif.txt b/dts/Bindings/sound/sunxi,sun4i-spdif.txt
index 13503aa505..0230c4d205 100644
--- a/dts/Bindings/sound/sunxi,sun4i-spdif.txt
+++ b/dts/Bindings/sound/sunxi,sun4i-spdif.txt
@@ -9,6 +9,7 @@ Required properties:
 
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
 
   - reg			: Offset and length of the register set for the device.
 
@@ -25,6 +26,8 @@ Required properties:
 	"apb"		  clock for the spdif bus.
 	"spdif"		  clock for spdif controller.
 
+  - resets		: reset specifier for the ahb reset (A31 and newer only)
+
 Example:
 
 spdif: spdif@01c21000 {
diff --git a/dts/Bindings/sound/tlv320aic31xx.txt b/dts/Bindings/sound/tlv320aic31xx.txt
index eff12be5e7..9340d2ddcc 100644
--- a/dts/Bindings/sound/tlv320aic31xx.txt
+++ b/dts/Bindings/sound/tlv320aic31xx.txt
@@ -11,6 +11,7 @@ Required properties:
     "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
     "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
 
 - reg - <int> -  I2C slave address
 - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
@@ -37,9 +38,11 @@ CODEC output pins:
   * MICBIAS
 
 CODEC input pins:
-  * MIC1LP
-  * MIC1RP
-  * MIC1LM
+  * MIC1LP, devices with ADC
+  * MIC1RP, devices with ADC
+  * MIC1LM, devices with ADC
+  * AIN1, devices without ADC
+  * AIN2, devices without ADC
 
 The pins can be used in referring sound node's audio-routing property.