dts: update to v5.19-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

35 files changed, 659 insertions, 121 deletions

diff --git a/dts/Bindings/sound/adi,adau1372.yaml b/dts/Bindings/sound/adi,adau1372.yaml
index 701449311f..59f7c60a14 100644
--- a/dts/Bindings/sound/adi,adau1372.yaml
+++ b/dts/Bindings/sound/adi,adau1372.yaml
@@ -64,4 +64,3 @@ examples:
         clock-frequency = <12288000>;
     };
 ...
-
diff --git a/dts/Bindings/sound/adi,max98396.yaml b/dts/Bindings/sound/adi,max98396.yaml
new file mode 100644
index 0000000000..ec4c10c259
--- /dev/null
+++ b/dts/Bindings/sound/adi,max98396.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98396.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98396 Speaker Amplifier Device Tree Bindings
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98396 is a mono Class-DG speaker amplifier with I/V sense.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+  The MAX98397 is a variant of MAX98396 with wide input supply range.
+
+properties:
+  compatible:
+    enum:
+      - adi,max98396
+      - adi,max98397
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,spkfb-slot-no:
+    description: slot number of speaker DSP monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V sense data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98396: amplifier@39 {
+            compatible = "adi,max98396";
+            reg = <0x39>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/dts/Bindings/sound/amlogic,gx-sound-card.yaml b/dts/Bindings/sound/amlogic,gx-sound-card.yaml
index 8b5be4b92f..b4b35edcb4 100644
--- a/dts/Bindings/sound/amlogic,gx-sound-card.yaml
+++ b/dts/Bindings/sound/amlogic,gx-sound-card.yaml
@@ -112,4 +112,3 @@ examples:
                 };
         };
     };
-
diff --git a/dts/Bindings/sound/arm,pl041.yaml b/dts/Bindings/sound/arm,pl041.yaml
new file mode 100644
index 0000000000..7896b8150c
--- /dev/null
+++ b/dts/Bindings/sound/arm,pl041.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/arm,pl041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL041 AACI sound interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant
+  peripheral that provides communication with an audio CODEC using the AC-link
+  protocol.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl041
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl041
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: APB register access clock
+
+  clock-names:
+    const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-controller@40000 {
+        compatible = "arm,pl041", "arm,primecell";
+        reg = <0x040000 0x1000>;
+        interrupts = <11>;
+        clocks = <&v2m_clk24mhz>;
+        clock-names = "apb_pclk";
+    };
+
+...
diff --git a/dts/Bindings/sound/audio-graph-card2.yaml b/dts/Bindings/sound/audio-graph-card2.yaml
index f7e94b1e0e..7416067c94 100644
--- a/dts/Bindings/sound/audio-graph-card2.yaml
+++ b/dts/Bindings/sound/audio-graph-card2.yaml
@@ -24,10 +24,13 @@ properties:
       connection's sink, the second being the connection's source.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   multi:
+    type: object
     description: Multi-CPU/Codec node
   dpcm:
+    type: object
     description: DPCM node
   codec2codec:
+    type: object
     description: Codec to Codec node
 
 required:
diff --git a/dts/Bindings/sound/cirrus,cs35l41.yaml b/dts/Bindings/sound/cirrus,cs35l41.yaml
index 3235702ce4..51d815d0c6 100644
--- a/dts/Bindings/sound/cirrus,cs35l41.yaml
+++ b/dts/Bindings/sound/cirrus,cs35l41.yaml
@@ -75,6 +75,19 @@ properties:
     maximum: 3
     default: 2
 
+  cirrus,boost-type:
+    description:
+      Configures the type of Boost being used.
+      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
+      boost-cap-microfarad.
+      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
+      enable boost voltage.
+      0 = Internal Boost
+      1 = External Boost
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
   cirrus,gpio1-polarity-invert:
     description:
       Boolean which specifies whether the GPIO1
@@ -131,9 +144,32 @@ required:
   - compatible
   - reg
   - "#sound-dai-cells"
-  - cirrus,boost-peak-milliamp
-  - cirrus,boost-ind-nanohenry
-  - cirrus,boost-cap-microfarad
+
+allOf:
+  - if:
+      properties:
+        cirrus,boost-type:
+          const: 0
+    then:
+      required:
+        - cirrus,boost-peak-milliamp
+        - cirrus,boost-ind-nanohenry
+        - cirrus,boost-cap-microfarad
+    else:
+      if:
+        properties:
+          cirrus,boost-type:
+            const: 1
+      then:
+        required:
+          - cirrus,gpio1-output-enable
+          - cirrus,gpio1-src-select
+        properties:
+          cirrus,boost-peak-milliamp: false
+          cirrus,boost-ind-nanohenry: false
+          cirrus,boost-cap-microfarad: false
+          cirrus,gpio1-src-select:
+            enum: [1]
 
 additionalProperties: false
 
@@ -150,6 +186,8 @@ examples:
           VA-supply = <&dummy_vreg>;
           VP-supply = <&dummy_vreg>;
           reset-gpios = <&gpio 110 0>;
+
+          cirrus,boost-type = <0>;
           cirrus,boost-peak-milliamp = <4500>;
           cirrus,boost-ind-nanohenry = <1000>;
           cirrus,boost-cap-microfarad = <15>;
diff --git a/dts/Bindings/sound/cirrus,cs35l45.yaml b/dts/Bindings/sound/cirrus,cs35l45.yaml
new file mode 100644
index 0000000000..184a1344ea
--- /dev/null
+++ b/dts/Bindings/sound/cirrus,cs35l45.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L45 Speaker Amplifier
+
+maintainers:
+  - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
+  - Richard Fitzgerald <rf@opensource.cirrus.com>
+
+description: |
+  CS35L45 is a Boosted Mono Class D Amplifier with DSP
+  Speaker Protection and Adaptive Battery Management.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l45
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: voltage regulator phandle for the VDD_A supply
+
+  vdd-batt-supply:
+    description: voltage regulator phandle for the VDD_BATT supply
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  cirrus,asp-sdout-hiz-ctrl:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier. Logical OR of
+      CS35L45_ASP_TX_HIZ_xxx values.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs35l45.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l45: cs35l45@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l45";
+          reg = <2>;
+          spi-max-frequency = <5000000>;
+          vdd-a-supply = <&dummy_vreg>;
+          vdd-batt-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+          cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
+                                        CS35L45_ASP_TX_HIZ_DISABLED)>;
+        };
+    };
diff --git a/dts/Bindings/sound/fsl,micfil.txt b/dts/Bindings/sound/fsl,micfil.txt
index 53e227b152..1ea05d4996 100644
--- a/dts/Bindings/sound/fsl,micfil.txt
+++ b/dts/Bindings/sound/fsl,micfil.txt
@@ -6,6 +6,7 @@ microphone bitstream in a configurable output sampling rate.
 Required properties:
 
   - compatible		: Compatible list, contains "fsl,imx8mm-micfil"
+			  or "fsl,imx8mp-micfil"
 
   - reg			: Offset and length of the register set for the device.
 
diff --git a/dts/Bindings/sound/imx-audio-hdmi.yaml b/dts/Bindings/sound/imx-audio-hdmi.yaml
index d5474f83ac..e7e7bb65c3 100644
--- a/dts/Bindings/sound/imx-audio-hdmi.yaml
+++ b/dts/Bindings/sound/imx-audio-hdmi.yaml
@@ -20,9 +20,11 @@ properties:
     description: User specified audio sound card name
 
   audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of an CPU DAI controller
 
   hdmi-out:
+    type: boolean
     description: |
       This is a boolean property. If present, the transmitting function
       of HDMI will be enabled, indicating there's a physical HDMI out
@@ -30,6 +32,7 @@ properties:
       block, such as an HDMI encoder or display-controller.
 
   hdmi-in:
+    type: boolean
     description: |
       This is a boolean property. If present, the receiving function of
       HDMI will be enabled, indicating there is a physical HDMI in
diff --git a/dts/Bindings/sound/maxim,max98390.yaml b/dts/Bindings/sound/maxim,max98390.yaml
index fea9a1b661..deaa6886c4 100644
--- a/dts/Bindings/sound/maxim,max98390.yaml
+++ b/dts/Bindings/sound/maxim,max98390.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 1
     maximum: 8388607
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -37,6 +40,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -45,5 +49,6 @@ examples:
         reg = <0x38>;
         maxim,temperature_calib = <1024>;
         maxim,r0_calib = <100232>;
+        reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
       };
     };
diff --git a/dts/Bindings/sound/maxim,max98520.yaml b/dts/Bindings/sound/maxim,max98520.yaml
index b6509cb2c8..3f88c7d61e 100644
--- a/dts/Bindings/sound/maxim,max98520.yaml
+++ b/dts/Bindings/sound/maxim,max98520.yaml
@@ -33,4 +33,3 @@ examples:
         reg = <0x38>;
       };
     };
-
diff --git a/dts/Bindings/sound/mchp,spdifrx.yaml b/dts/Bindings/sound/mchp,spdifrx.yaml
index 4a2129005c..9703111432 100644
--- a/dts/Bindings/sound/mchp,spdifrx.yaml
+++ b/dts/Bindings/sound/mchp,spdifrx.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 
 description:
-  The Microchip Sony/Philips Digital Interface Receiver is a serial port 
+  The Microchip Sony/Philips Digital Interface Receiver is a serial port
   compliant with the IEC-60958 standard.
 
 properties:
diff --git a/dts/Bindings/sound/mchp,spdiftx.yaml b/dts/Bindings/sound/mchp,spdiftx.yaml
index bdfb63387c..d5c022e495 100644
--- a/dts/Bindings/sound/mchp,spdiftx.yaml
+++ b/dts/Bindings/sound/mchp,spdiftx.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 
 description:
-  The Microchip Sony/Philips Digital Interface Transmitter is a serial port 
+  The Microchip Sony/Philips Digital Interface Transmitter is a serial port
   compliant with the IEC-60958 standard.
 
 properties:
diff --git a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
index 5a5b765b85..4fa179909c 100644
--- a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
+++ b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - mediatek,mt8192_mt6359_rt1015_rt5682
       - mediatek,mt8192_mt6359_rt1015p_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682s
 
   mediatek,platform:
     $ref: "/schemas/types.yaml#/definitions/phandle"
@@ -27,11 +28,33 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of HDMI codec.
 
+  headset-codec:
+    type: object
+    properties:
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+    required:
+      - sound-dai
+
+  speaker-codecs:
+    type: object
+    properties:
+      sound-dai:
+        minItems: 1
+        maxItems: 2
+        items:
+          maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+    required:
+      - sound-dai
+
 additionalProperties: false
 
 required:
   - compatible
   - mediatek,platform
+  - headset-codec
+  - speaker-codecs
 
 examples:
   - |
@@ -44,6 +67,15 @@ examples:
                         "aud_clk_mosi_on";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682>;
+        };
+
+        speaker-codecs {
+            sound-dai = <&rt1015_l>,
+                        <&rt1015_r>;
+        };
     };
 
 ...
diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
deleted file mode 100644
index cf6ad7933e..0000000000
--- a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
+++ /dev/null
@@ -1,51 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver
-
-maintainers:
-  - Trevor Wu <trevor.wu@mediatek.com>
-
-description:
-  This binding describes the MT8195 sound card with RT1011 and RT5682.
-
-properties:
-  compatible:
-    const: mediatek,mt8195_mt6359_rt1011_rt5682
-
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
-  mediatek,platform:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 ASoC platform.
-
-  mediatek,dptx-codec:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 Display Port Tx codec node.
-
-  mediatek,hdmi-codec:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 HDMI codec node.
-
-additionalProperties: false
-
-required:
-  - compatible
-  - mediatek,platform
-
-examples:
-  - |
-
-    sound: mt8195-sound {
-        compatible = "mediatek,mt8195_mt6359_rt1011_rt5682";
-        mediatek,platform = <&afe>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&aud_pins_default>;
-    };
-
-...
diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359.yaml
index 8f177e02ad..ad3447ff8b 100644
--- a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
+++ b/dts/Bindings/sound/mt8195-mt6359.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml#
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver
+title: MediaTek MT8195 ASoC sound card driver
 
 maintainers:
   - Trevor Wu <trevor.wu@mediatek.com>
@@ -14,7 +14,10 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195_mt6359_rt1019_rt5682
+    enum:
+      - mediatek,mt8195_mt6359_rt1019_rt5682
+      - mediatek,mt8195_mt6359_rt1011_rt5682
+      - mediatek,mt8195_mt6359_max98390_rt5682
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml
index e768fb0e9a..b1deaf271a 100644
--- a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml
+++ b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -82,4 +82,3 @@ examples:
         clocks = <&clk 216>, <&clk 217>, <&clk 120>;
         clock-names = "pll_a", "pll_a_out0", "mclk";
     };
-
diff --git a/dts/Bindings/sound/nvidia,tegra186-asrc.yaml b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml
new file mode 100644
index 0000000000..520d0d063d
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra186-asrc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 ASRC Device Tree Bindings
+
+description: |
+  Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
+  of the input signal from one frequency to another. It can handle over a
+  wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
+  ASRC has two modes of operation. One where ratio can be programmed in SW
+  and the other where it gets the information from ratio estimator module.
+
+  It supports  sample rate conversions in the range of 8 to 192 kHz and
+  supports 6 streams upto 12 total channels. The input data size can be
+  16, 24 and 32 bits.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^asrc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-asrc
+      - items:
+          - enum:
+              - nvidia,tegra234-asrc
+              - nvidia,tegra194-asrc
+          - const: nvidia,tegra186-asrc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ASRC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ASRC has seven input ports and six output ports. Accordingly ACIF
+      (Audio Client Interfaces) port nodes are defined to represent the
+      ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are
+      connected to corresponding ports on AHUB (Audio Hub). Additional
+      input (port 6) is for receiving ratio information from estimator.
+
+    patternProperties:
+      '^port@[0-6]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF input ports
+      '^port@[7-9]|1[1-2]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    asrc@2910000 {
+        compatible = "nvidia,tegra186-asrc";
+        reg = <0x2910000 0x2000>;
+        sound-name-prefix = "ASRC1";
+    };
+
+...
diff --git a/dts/Bindings/sound/nvidia,tegra210-ahub.yaml b/dts/Bindings/sound/nvidia,tegra210-ahub.yaml
index 4727f1e42c..6df6f85803 100644
--- a/dts/Bindings/sound/nvidia,tegra210-ahub.yaml
+++ b/dts/Bindings/sound/nvidia,tegra210-ahub.yaml
@@ -106,6 +106,10 @@ patternProperties:
     type: object
     $ref: nvidia,tegra210-mixer.yaml#
 
+  '^asrc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-asrc.yaml#
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/sound/qcom,lpass-cpu.yaml b/dts/Bindings/sound/qcom,lpass-cpu.yaml
index 2c81efb5fa..e9a533080b 100644
--- a/dts/Bindings/sound/qcom,lpass-cpu.yaml
+++ b/dts/Bindings/sound/qcom,lpass-cpu.yaml
@@ -38,8 +38,8 @@ properties:
     maxItems: 7
 
   clock-names:
-    minItems: 3
-    maxItems: 7
+    minItems: 1
+    maxItems: 10
 
   interrupts:
     minItems: 2
@@ -62,6 +62,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  power-domain-names:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
@@ -192,15 +195,19 @@ allOf:
           oneOf:
             - items:   #for I2S
                 - const: aon_cc_audio_hm_h
+                - const: audio_cc_ext_mclk0
                 - const: core_cc_sysnoc_mport_core
+                - const: core_cc_ext_if0_ibit
                 - const: core_cc_ext_if1_ibit
             - items:   #for Soundwire
                 - const: aon_cc_audio_hm_h
+                - const: audio_cc_codec_mem
                 - const: audio_cc_codec_mem0
                 - const: audio_cc_codec_mem1
                 - const: audio_cc_codec_mem2
+                - const: aon_cc_va_mem0
             - items:   #for HDMI
-                - const: aon_cc_audio_hm_h
+                - const: core_cc_sysnoc_mport_core
 
         reg-names:
           anyOf:
@@ -228,6 +235,10 @@ allOf:
                 - const: lpass-irq-hdmi
                 - const: lpass-irq-vaif
                 - const: lpass-irq-rxtxif
+        power-domain-names:
+          allOf:
+            - items:
+                - const: lcx
 
       required:
         - iommus
diff --git a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
index 6127df5836..a6905bcf89 100644
--- a/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-rx-macro.yaml
@@ -28,12 +28,17 @@ properties:
     maxItems: 5
 
   clock-names:
-    items:
-      - const: mclk
-      - const: npl
-      - const: macro
-      - const: dcodec
-      - const: fsgen
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
 
   clock-output-names:
     items:
diff --git a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
index 3f0f99cb18..324595a62a 100644
--- a/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-tx-macro.yaml
@@ -28,12 +28,17 @@ properties:
     maxItems: 5
 
   clock-names:
-    items:
-      - const: mclk
-      - const: npl
-      - const: macro
-      - const: dcodec
-      - const: fsgen
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
 
   clock-output-names:
     items:
diff --git a/dts/Bindings/sound/qcom,lpass-va-macro.yaml b/dts/Bindings/sound/qcom,lpass-va-macro.yaml
index 9868a5ebe2..7b4cc84eda 100644
--- a/dts/Bindings/sound/qcom,lpass-va-macro.yaml
+++ b/dts/Bindings/sound/qcom,lpass-va-macro.yaml
@@ -28,10 +28,13 @@ properties:
     maxItems: 3
 
   clock-names:
-    items:
-      - const: mclk
-      - const: core
-      - const: dcodec
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: core
+          - const: dcodec
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
 
   clock-output-names:
     items:
diff --git a/dts/Bindings/sound/qcom,wcd938x.yaml b/dts/Bindings/sound/qcom,wcd938x.yaml
index 7bf1a5fffc..51547190f7 100644
--- a/dts/Bindings/sound/qcom,wcd938x.yaml
+++ b/dts/Bindings/sound/qcom,wcd938x.yaml
@@ -36,6 +36,9 @@ properties:
   vdd-io-supply:
     description: A reference to the 1.8V I/O supply
 
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
   qcom,tx-device:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: A reference to Soundwire tx device phandle
diff --git a/dts/Bindings/sound/realtek,rt1015p.yaml b/dts/Bindings/sound/realtek,rt1015p.yaml
index fdb7f295ef..1d73204451 100644
--- a/dts/Bindings/sound/realtek,rt1015p.yaml
+++ b/dts/Bindings/sound/realtek,rt1015p.yaml
@@ -25,6 +25,9 @@ properties:
       0 means shut down; 1 means power on.
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
 
diff --git a/dts/Bindings/sound/rt5682.txt b/dts/Bindings/sound/rt5682.txt
index cd8c53d849..c5f2b8febc 100644
--- a/dts/Bindings/sound/rt5682.txt
+++ b/dts/Bindings/sound/rt5682.txt
@@ -46,6 +46,8 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
+- #sound-dai-cells: Should be set to '<0>'.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
diff --git a/dts/Bindings/sound/samsung,aries-wm8994.yaml b/dts/Bindings/sound/samsung,aries-wm8994.yaml
index 97f83eeaf0..a01c4ad929 100644
--- a/dts/Bindings/sound/samsung,aries-wm8994.yaml
+++ b/dts/Bindings/sound/samsung,aries-wm8994.yaml
@@ -149,4 +149,3 @@ examples:
             sound-dai = <&wm8994>;
         };
     };
-
diff --git a/dts/Bindings/sound/samsung,odroid.yaml b/dts/Bindings/sound/samsung,odroid.yaml
index db2513f3e1..7b4e08ddef 100644
--- a/dts/Bindings/sound/samsung,odroid.yaml
+++ b/dts/Bindings/sound/samsung,odroid.yaml
@@ -92,4 +92,3 @@ examples:
             sound-dai = <&hdmi>, <&max98090>;
         };
     };
-
diff --git a/dts/Bindings/sound/serial-midi.yaml b/dts/Bindings/sound/serial-midi.yaml
new file mode 100644
index 0000000000..4afc29376e
--- /dev/null
+++ b/dts/Bindings/sound/serial-midi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/serial-midi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Serial MIDI Interface
+
+maintainers:
+  - Daniel Kaehn <kaehndan@gmail.com>
+
+description:
+  Generic MIDI interface using a serial device. This denotes that a serial device is
+  dedicated to MIDI communication, either to an external MIDI device through a DIN5
+  or other connector, or to a known hardwired MIDI controller. This device must be a
+  child node of a serial node.
+
+  Can only be set to use standard baud rates corresponding to supported rates of the
+  parent serial device. If the standard MIDI baud of 31.25 kBaud is needed
+  (as would be the case if interfacing with arbitrary external MIDI devices),
+  configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud
+  resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default)
+
+properties:
+  compatible:
+    const: serial-midi
+
+  current-speed:
+    description: Baudrate to set the serial port to when this MIDI device is opened.
+    default: 38400
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+        };
+    };
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+            current-speed = <115200>;
+        };
+    };
diff --git a/dts/Bindings/sound/tas2562.yaml b/dts/Bindings/sound/tas2562.yaml
index acd4bbe697..5f7dd5d6cb 100644
--- a/dts/Bindings/sound/tas2562.yaml
+++ b/dts/Bindings/sound/tas2562.yaml
@@ -76,4 +76,3 @@ examples:
        ti,imon-slot-no = <0>;
      };
    };
-
diff --git a/dts/Bindings/sound/tas2770.yaml b/dts/Bindings/sound/tas2770.yaml
index 027bebf4e8..bc90e72bf7 100644
--- a/dts/Bindings/sound/tas2770.yaml
+++ b/dts/Bindings/sound/tas2770.yaml
@@ -80,4 +80,3 @@ examples:
        ti,vmon-slot-no = <2>;
      };
    };
-
diff --git a/dts/Bindings/sound/tas2764.yaml b/dts/Bindings/sound/tas27xx.yaml
index 5bf8c76ecd..66a0df8850 100644
--- a/dts/Bindings/sound/tas2764.yaml
+++ b/dts/Bindings/sound/tas27xx.yaml
@@ -1,25 +1,26 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# Copyright (C) 2020 Texas Instruments Incorporated
+# Copyright (C) 2020-2022 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/tas2764.yaml#"
+$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Texas Instruments TAS2764 Smart PA
+title: Texas Instruments TAS2764/TAS2780 Smart PA
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Shenghao Ding <shenghao-ding@ti.com>
 
 description: |
-  The TAS2764 is a mono, digital input Class-D audio amplifier optimized for
-  efficiently driving high peak power into small loudspeakers.
-  Integrated speaker voltage and current sense provides for
-  real time monitoring of loudspeaker behavior.
+  The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. Integrated speaker voltage and current sense provides
+  for real time monitoring of loudspeaker behavior.
 
 properties:
   compatible:
     enum:
       - ti,tas2764
+      - ti,tas2780
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/sound/wlf,wm8731.yaml b/dts/Bindings/sound/wlf,wm8731.yaml
new file mode 100644
index 0000000000..e7220e8b49
--- /dev/null
+++ b/dts/Bindings/sound/wlf,wm8731.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson Microelectromics WM8731 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Wolfson Microelectronics WM8731 audio CODEC
+
+  Pins on the device (for linking into audio routes):
+    * LOUT: Left Channel Line Output
+    * ROUT: Right Channel Line Output
+    * LHPOUT: Left Channel Headphone Output
+    * RHPOUT: Right Channel Headphone Output
+    * LLINEIN: Left Channel Line Input
+    * RLINEIN: Right Channel Line Input
+    * MICIN: Microphone Input
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8731
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    description: Clock provider for MCLK pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  HPVDD-supply:
+    description: Headphone power supply regulator on the HPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+  spi-max-frequency: true
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+  - HPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_i2c: codec@0 {
+            compatible = "wlf,wm8731";
+            reg = <0>;
+            spi-max-frequency = <12500000>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_spi: codec@1b {
+            compatible = "wlf,wm8731";
+            reg = <0x1b>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
diff --git a/dts/Bindings/sound/wlf,wm8940.yaml b/dts/Bindings/sound/wlf,wm8940.yaml
new file mode 100644
index 0000000000..8aadcbeed5
--- /dev/null
+++ b/dts/Bindings/sound/wlf,wm8940.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8940 Codec Device Tree Bindings
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8940
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/sound/wm8731.txt b/dts/Bindings/sound/wm8731.txt
deleted file mode 100644
index f660d9bb0e..0000000000
--- a/dts/Bindings/sound/wm8731.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-WM8731 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8731"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-Example:
-
-wm8731: codec@1a {
-	compatible = "wlf,wm8731";
-	reg = <0x1a>;
-};
-
-Available audio endpoints for an audio-routing table:
- * LOUT: Left Channel Line Output
- * ROUT: Right Channel Line Output
- * LHPOUT: Left Channel Headphone Output
- * RHPOUT: Right Channel Headphone Output
- * LLINEIN: Left Channel Line Input
- * RLINEIN: Right Channel Line Input
- * MICIN: Microphone Input