dts: update to v4.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 68 insertions, 2 deletions

diff --git a/dts/Bindings/spi/sh-msiof.txt b/dts/Bindings/spi/sh-msiof.txt
index aa005c1d10..da6614c637 100644
--- a/dts/Bindings/spi/sh-msiof.txt
+++ b/dts/Bindings/spi/sh-msiof.txt
@@ -10,6 +10,7 @@ Required properties:
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
+			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
diff --git a/dts/Bindings/spi/spi-armada-3700.txt b/dts/Bindings/spi/spi-armada-3700.txt
new file mode 100644
index 0000000000..1564aa8c02
--- /dev/null
+++ b/dts/Bindings/spi/spi-armada-3700.txt
@@ -0,0 +1,25 @@
+* Marvell Armada 3700 SPI Controller
+
+Required Properties:
+
+- compatible: should be "marvell,armada-3700-spi"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number. The interrupt specifier format depends on
+	      the interrupt controller and of its driver.
+- clocks: Must contain the clock source, usually from the North Bridge clocks.
+- num-cs: The number of chip selects that is supported by this SPI Controller
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+	spi0: spi@10600 {
+		compatible = "marvell,armada-3700-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10600 0x5d>;
+		clocks = <&nb_perih_clk 7>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <4>;
+	};
diff --git a/dts/Bindings/spi/spi-fsl-lpspi.txt b/dts/Bindings/spi/spi-fsl-lpspi.txt
new file mode 100644
index 0000000000..225ace1d0c
--- /dev/null
+++ b/dts/Bindings/spi/spi-fsl-lpspi.txt
@@ -0,0 +1,19 @@
+* Freescale Low Power SPI (LPSPI) for i.MX
+
+Required properties:
+- compatible :
+  - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
+- reg : address and length of the lpspi master registers
+- interrupt-parent : core interrupt controller
+- interrupts : lpspi interrupt
+- clocks : lpspi clock specifier
+
+Examples:
+
+lpspi2: lpspi@40290000 {
+	compatible = "fsl,imx7ulp-spi";
+	reg = <0x40290000 0x10000>;
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7ULP_CLK_LPSPI2>;
+};
diff --git a/dts/Bindings/spi/spi-sun6i.txt b/dts/Bindings/spi/spi-sun6i.txt
index 21de73db6a..2ec99b86b6 100644
--- a/dts/Bindings/spi/spi-sun6i.txt
+++ b/dts/Bindings/spi/spi-sun6i.txt
@@ -1,7 +1,7 @@
-Allwinner A31 SPI controller
+Allwinner A31/H3 SPI controller
 
 Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi".
+- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
 - reg: Should contain register location and length.
 - interrupts: Should contain interrupt.
 - clocks: phandle to the clocks feeding the SPI controller. Two are
@@ -12,6 +12,11 @@ Required properties:
 - resets: phandle to the reset controller asserting this device in
           reset
 
+Optional properties:
+- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "rx" and "tx" if present.
+
 Example:
 
 spi1: spi@01c69000 {
@@ -22,3 +27,19 @@ spi1: spi@01c69000 {
 	clock-names = "ahb", "mod";
 	resets = <&ahb1_rst 21>;
 };
+
+spi0: spi@01c68000 {
+	compatible = "allwinner,sun8i-h3-spi";
+	reg = <0x01c68000 0x1000>;
+	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 23>, <&dma 23>;
+	dma-names = "rx", "tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	resets = <&ccu RST_BUS_SPI0>;
+	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};