diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-07-08 14:44:21 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-07-08 14:44:21 +0200 |
commit | 87360e3dd42bb627a9f2611f961728c0789e1c21 (patch) | |
tree | afefc88c862d9feafb0cdb075badeb8d32d8efd2 /dts/Bindings/thermal/qcom-spmi-temp-alarm.txt | |
parent | 80936d6aaeea1b10ce4eb81c54eece2f55f8e209 (diff) | |
download | barebox-87360e3dd42bb627a9f2611f961728c0789e1c21.tar.gz barebox-87360e3dd42bb627a9f2611f961728c0789e1c21.tar.xz |
dts: update to v4.2-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/thermal/qcom-spmi-temp-alarm.txt')
-rw-r--r-- | dts/Bindings/thermal/qcom-spmi-temp-alarm.txt | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt b/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt new file mode 100644 index 0000000000..290ec06fa3 --- /dev/null +++ b/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt @@ -0,0 +1,57 @@ +Qualcomm QPNP PMIC Temperature Alarm + +QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips +that utilize the Qualcomm SPMI implementation. These peripherals provide an +interrupt signal and status register to identify high PMIC die temperature. + +Required properties: +- compatible: Should contain "qcom,spmi-temp-alarm". +- reg: Specifies the SPMI address and length of the controller's + registers. +- interrupts: PMIC temperature alarm interrupt. +- #thermal-sensor-cells: Should be 0. See thermal.txt for a description. + +Optional properties: +- io-channels: Should contain IIO channel specifier for the ADC channel, + which report chip die temperature. +- io-channel-names: Should contain "thermal". + +Example: + + pm8941_temp: thermal-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + thermal-zones { + pm8941 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8941_temp>; + + trips { + passive { + temperature = <1050000>; + hysteresis = <2000>; + type = "passive"; + }; + alert { + temperature = <125000>; + hysteresis = <2000>; + type = "hot"; + }; + crit { + temperature = <145000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + |