dts: update to v4.7-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 119 insertions, 2 deletions

diff --git a/dts/Bindings/thermal/tegra-soctherm.txt b/dts/Bindings/thermal/nvidia,tegra124-soctherm.txt
index 6b68cd1504..edebfa0a98 100644
--- a/dts/Bindings/thermal/tegra-soctherm.txt
+++ b/dts/Bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -26,10 +26,14 @@ Required properties :
     of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
     list of valid values when referring to thermal sensors.
 
+Note:
+- the "critical" type trip points will be set to SOC_THERM hardware as the
+shut down temperature. Once the temperature of this thermal zone is higher
+than it, the system will be shutdown or reset by hardware.
 
 Example :
 
-	soctherm@0,700e2000 {
+	soctherm@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x1000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -51,5 +55,13 @@ Example: referring to thermal sensors :
 
                         thermal-sensors =
                                 <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip: shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
                 };
 	};
diff --git a/dts/Bindings/thermal/rcar-thermal.txt b/dts/Bindings/thermal/rcar-thermal.txt
index e5ee3f1598..a8e52c8ccf 100644
--- a/dts/Bindings/thermal/rcar-thermal.txt
+++ b/dts/Bindings/thermal/rcar-thermal.txt
@@ -11,7 +11,6 @@ Required properties:
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
-			    - "renesas,thermal-r8a7794" (R-Car E2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
diff --git a/dts/Bindings/thermal/tango-thermal.txt b/dts/Bindings/thermal/tango-thermal.txt
new file mode 100644
index 0000000000..212198d4b9
--- /dev/null
+++ b/dts/Bindings/thermal/tango-thermal.txt
@@ -0,0 +1,17 @@
+* Tango Thermal
+
+The SMP8758 SoC includes 3 instances of this temperature sensor
+(in the CPU, video decoder, and PCIe controller).
+
+Required properties:
+- #thermal-sensor-cells: Should be 0 (see thermal.txt)
+- compatible: "sigma,smp8758-thermal"
+- reg: Address range of the thermal registers
+
+Example:
+
+	cpu_temp: thermal@920100 {
+		#thermal-sensor-cells = <0>;
+		compatible = "sigma,smp8758-thermal";
+		reg = <0x920100 12>;
+	};
diff --git a/dts/Bindings/thermal/thermal-generic-adc.txt b/dts/Bindings/thermal/thermal-generic-adc.txt
new file mode 100644
index 0000000000..d72355502b
--- /dev/null
+++ b/dts/Bindings/thermal/thermal-generic-adc.txt
@@ -0,0 +1,89 @@
+General Purpose Analog To Digital Converter (ADC) based thermal sensor.
+
+On some of platforms, thermal sensor like thermistors are connected to
+one of ADC channel and sensor resistance is read via voltage across the
+sensor resistor. The voltage read across the sensor is mapped to
+temperature using voltage-temperature lookup table.
+
+Required properties:
+===================
+- compatible:		     Must be "generic-adc-thermal".
+- temperature-lookup-table:  Two dimensional array of Integer; lookup table
+			     to map the relation between ADC value and
+			     temperature. When ADC is read, the value is
+			     looked up on the table to get the equivalent
+			     temperature.
+			     The first value of the each row of array is the
+			     temperature in milliCelsius and second value of
+			     the each row of array is the ADC read value.
+- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+			     of this property.
+
+Example :
+#include <dt-bindings/thermal/thermal.h>
+
+i2c@7000c400 {
+	ads1015: ads1015@4a {
+		reg = <0x4a>;
+		compatible = "ads1015";
+		sampling-frequency = <3300>;
+		#io-channel-cells = <1>;
+	};
+};
+
+tboard_thermistor: thermal-sensor {
+	compatible = "generic-adc-thermal";
+	#thermal-sensor-cells = <0>;
+	io-channels = <&ads1015 1>;
+	io-channel-names = "sensor-channel";
+	temperature-lookup-table = <    (-40000) 2578
+					(-39000) 2577
+					(-38000) 2576
+					(-37000) 2575
+					(-36000) 2574
+					(-35000) 2573
+					(-34000) 2572
+					(-33000) 2571
+					(-32000) 2569
+					(-31000) 2568
+					(-30000) 2567
+					::::::::::
+					118000 254
+					119000 247
+					120000 240
+					121000 233
+					122000 226
+					123000 220
+					124000 214
+					125000 208>;
+};
+
+dummy_cool_dev: dummy-cool-dev {
+	compatible = "dummy-cooling-dev";
+	#cooling-cells = <2>; /* min followed by max */
+};
+
+thermal-zones {
+	Tboard {
+		polling-delay = <15000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor>;
+
+		trips {
+			therm_est_trip: therm_est_trip {
+				temperature = <40000>;
+				type = "active";
+				hysteresis = <1000>;
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&therm_est_trip>;
+				cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+
+		};
+	};
+};