dts: update to v5.12-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 159 insertions, 139 deletions

diff --git a/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 31edd05129..bf97d1fb33 100644
--- a/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -103,12 +103,12 @@ allOf:
         compatible:
           contains:
             enum:
-              - const: allwinner,sun8i-h3-ths
-              - const: allwinner,sun8i-r40-ths
-              - const: allwinner,sun50i-a64-ths
-              - const: allwinner,sun50i-a100-ths
-              - const: allwinner,sun50i-h5-ths
-              - const: allwinner,sun50i-h6-ths
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun8i-r40-ths
+              - allwinner,sun50i-a64-ths
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h5-ths
+              - allwinner,sun50i-h6-ths
 
     then:
       required:
diff --git a/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml
new file mode 100644
index 0000000000..7cd3644305
--- /dev/null
+++ b/dts/Bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,spmi-adc-tm5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+    enum:
+      - 250
+      - 420
+      - 840
+    default: 840
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc5";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other propreties are omitted */
+            conn-therm@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pm8150b_adc_tm: adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            conn-therm@0 {
+                reg = <0>;
+                io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/thermal/tango-thermal.txt b/dts/Bindings/thermal/tango-thermal.txt
deleted file mode 100644
index 2c918d7428..0000000000
--- a/dts/Bindings/thermal/tango-thermal.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Tango Thermal
-
-The SMP8758 SoC includes 3 instances of this temperature sensor
-(in the CPU, video decoder, and PCIe controller).
-
-Required properties:
-- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-- compatible: "sigma,smp8758-thermal"
-- reg: Address range of the thermal registers
-
-Example:
-
-	cpu_temp: thermal@920100 {
-		#thermal-sensor-cells = <0>;
-		compatible = "sigma,smp8758-thermal";
-		reg = <0x920100 12>;
-	};
diff --git a/dts/Bindings/thermal/zx2967-thermal.txt b/dts/Bindings/thermal/zx2967-thermal.txt
deleted file mode 100644
index 3dc1c6bf04..0000000000
--- a/dts/Bindings/thermal/zx2967-thermal.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* ZTE zx2967 family Thermal
-
-Required Properties:
-- compatible: should be one of the following.
-    * zte,zx296718-thermal
-- reg: physical base address of the controller and length of memory mapped
-    region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "topcrm" for the topcrm clock.
-	       "apb" for the apb clock.
-- #thermal-sensor-cells: must be 0.
-
-Please note: slope coefficient defined in thermal-zones section need to be
-multiplied by 1000.
-
-Example for tempsensor:
-
-	tempsensor: tempsensor@148a000 {
-		compatible = "zte,zx296718-thermal";
-		reg = <0x0148a000 0x20>;
-		clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
-		clock-names = "topcrm", "apb";
-		#thermal-sensor-cells = <0>;
-	};
-
-Example for cooling device:
-
-	cooling_dev: cooling_dev {
-		cluster0_cooling_dev: cluster0-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0xf>;
-			capacitance = <1500>;
-		};
-
-	cluster1_cooling_dev: cluster1-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0x30>;
-			capacitance = <2000>;
-		};
-	};
-
-Example for thermal zones:
-
-	thermal-zones {
-		zx296718_thermal: zx296718_thermal {
-			polling-delay-passive = <500>;
-			polling-delay = <1000>;
-			sustainable-power = <6500>;
-
-			thermal-sensors = <&tempsensor 0>;
-			/*
-			 * slope need to be multiplied by 1000.
-			 */
-			coefficients = <1951 (-922)>;
-
-			trips {
-				trip0: switch_on_temperature {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip1: desired_temperature {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				crit: critical_temperature {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&gpu 2 5>;
-				};
-
-				map1 {
-					trip = <&trip0>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map2 {
-					trip = <&trip1>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map3 {
-					trip = <&crit>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map4 {
-					trip = <&trip0>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <9000>;
-				};
-
-				map5 {
-					trip = <&trip1>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-
-				map6 {
-					trip = <&crit>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-			};
-		};
-	};