dts: update to v4.18-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

13 files changed, 441 insertions, 4 deletions

diff --git a/dts/Bindings/timer/altr,timer-1.0.txt b/dts/Bindings/timer/altr,timer-1.0.txt
new file mode 100644
index 0000000000..904a5846d7
--- /dev/null
+++ b/dts/Bindings/timer/altr,timer-1.0.txt
@@ -0,0 +1,19 @@
+Altera Timer
+
+Required properties:
+
+- compatible : should be "altr,timer-1.0"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-parent: phandle of the interrupt controller
+- interrupts : Should contain the timer interrupt number
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "altr,timer-1.0";
+	reg = <0x00400000 0x00000020>;
+	interrupt-parent = <&cpu>;
+	interrupts = <11>;
+	clock-frequency = <125000000>;
+};
diff --git a/dts/Bindings/timer/arm,arch_timer.txt b/dts/Bindings/timer/arm,arch_timer.txt
new file mode 100644
index 0000000000..68301b77e8
--- /dev/null
+++ b/dts/Bindings/timer/arm,arch_timer.txt
@@ -0,0 +1,112 @@
+* ARM architected timer
+
+ARM cores may have a per-core architected timer, which provides per-cpu timers,
+or a memory mapped architected timer, which provides up to 8 frames with a
+physical and optional virtual timer per frame.
+
+The per-core architected timer is attached to a GIC to deliver its
+per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+to deliver its interrupts via SPIs.
+
+** CP15 Timer node properties:
+
+- compatible : Should at least contain one of
+	"arm,armv7-timer"
+	"arm,armv8-timer"
+
+- interrupts : Interrupt list for secure, non-secure, virtual and
+  hypervisor timers, in that order.
+
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only where necessary to work around broken firmware which does not configure
+  CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+  strongly discouraged; fix your firmware unless absolutely impossible.
+
+- always-on : a boolean property. If present, the timer is powered through an
+  always-on power domain, therefore it never loses context.
+
+- fsl,erratum-a008585 : A boolean property. Indicates the presence of
+  QorIQ erratum A-008585, which says that reading the counter is
+  unreliable unless the same value is returned by back-to-back reads.
+  This also affects writes to the tval register, due to the implicit
+  counter read.
+
+- hisilicon,erratum-161010101 : A boolean property. Indicates the
+  presence of Hisilicon erratum 161010101, which says that reading the
+  counters is unreliable in some cases, and reads may return a value 32
+  beyond the correct value. This also affects writes to the tval
+  registers, due to the implicit counter read.
+
+** Optional properties:
+
+- arm,cpu-registers-not-fw-configured : Firmware does not initialize
+  any of the generic timer CPU registers, which contain their
+  architecturally-defined reset values. Only supported for 32-bit
+  systems which follow the ARMv7 architected reset values.
+
+- arm,no-tick-in-suspend : The main counter does not tick when the system is in
+  low-power system suspend on some SoCs. This behavior does not match the
+  Architecture Reference Manual's specification that the system counter "must
+  be implemented in an always-on power domain."
+
+
+Example:
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+** Memory mapped timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer-mem".
+
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only when firmware has not configured the MMIO CNTFRQ registers.
+
+- reg : The control frame base address.
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the CPU can address a frame's registers.
+
+A timer node has up to 8 frame sub-nodes, each with the following properties:
+
+- frame-number: 0 to 7.
+
+- interrupts : Interrupt list for physical and virtual timers in that order.
+  The virtual timer interrupt is optional.
+
+- reg : The first and second view base addresses in that order. The second view
+  base address is optional.
+
+- status : "disabled" indicates the frame is not available for use. Optional.
+
+Example:
+
+	timer@f0000000 {
+		compatible = "arm,armv7-timer-mem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0xf0000000 0x1000>;
+		clock-frequency = <50000000>;
+
+		frame@f0001000 {
+			frame-number = <0>
+			interrupts = <0 13 0x8>,
+				     <0 14 0x8>;
+			reg = <0xf0001000 0x1000>,
+			      <0xf0002000 0x1000>;
+		};
+
+		frame@f0003000 {
+			frame-number = <1>
+			interrupts = <0 15 0x8>;
+			reg = <0xf0003000 0x1000>;
+		};
+	};
diff --git a/dts/Bindings/timer/arm,armv7m-systick.txt b/dts/Bindings/timer/arm,armv7m-systick.txt
new file mode 100644
index 0000000000..7cf4a24601
--- /dev/null
+++ b/dts/Bindings/timer/arm,armv7m-systick.txt
@@ -0,0 +1,26 @@
+* ARMv7M System Timer
+
+ARMv7-M includes a system timer, known as SysTick. Current driver only
+implements the clocksource feature.
+
+Required properties:
+- compatible	  : Should be "arm,armv7m-systick"
+- reg		  : The address range of the timer
+
+Required clocking property, have to be one of:
+- clocks	  : The input clock of the timer
+- clock-frequency : The rate in HZ in input of the ARM SysTick
+
+Examples:
+
+systick: timer@e000e010 {
+	compatible = "arm,armv7m-systick";
+	reg = <0xe000e010 0x10>;
+	clocks = <&clk_systick>;
+};
+
+systick: timer@e000e010 {
+	compatible = "arm,armv7m-systick";
+	reg = <0xe000e010 0x10>;
+	clock-frequency = <90000000>;
+};
diff --git a/dts/Bindings/timer/arm,global_timer.txt b/dts/Bindings/timer/arm,global_timer.txt
new file mode 100644
index 0000000000..bdae3a8187
--- /dev/null
+++ b/dts/Bindings/timer/arm,global_timer.txt
@@ -0,0 +1,27 @@
+
+* ARM Global Timer
+	Cortex-A9 are often associated with a per-core Global timer.
+
+** Timer node required properties:
+
+- compatible : should contain
+	     * "arm,cortex-a5-global-timer" for Cortex-A5 global timers.
+	     * "arm,cortex-a9-global-timer" for Cortex-A9 global
+	         timers or any compatible implementation. Note: driver
+	         supports versions r2p0 and above.
+
+- interrupts : One interrupt to each core
+
+- reg : Specify the base address and the size of the GT timer
+	register window.
+
+- clocks : Should be phandle to a clock.
+
+Example:
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0xf01>;
+		clocks = <&arm_periph_clk>;
+	};
diff --git a/dts/Bindings/timer/arm,twd.txt b/dts/Bindings/timer/arm,twd.txt
new file mode 100644
index 0000000000..383ea19c2b
--- /dev/null
+++ b/dts/Bindings/timer/arm,twd.txt
@@ -0,0 +1,53 @@
+* ARM Timer Watchdog
+
+ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+and watchdog.
+
+The TWD is usually attached to a GIC to deliver its two per-processor
+interrupts.
+
+** Timer node required properties:
+
+- compatible : Should be one of:
+	"arm,cortex-a9-twd-timer"
+	"arm,cortex-a5-twd-timer"
+	"arm,arm11mp-twd-timer"
+
+- interrupts : One interrupt to each core
+
+- reg : Specify the base address and the size of the TWD timer
+	register window.
+
+Optional
+
+- always-on : a boolean property. If present, the timer is powered through
+  an always-on power domain, therefore it never loses context.
+
+Example:
+
+	twd-timer@2c000600 {
+		compatible = "arm,arm11mp-twd-timer"";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0xf01>;
+	};
+
+** Watchdog node properties:
+
+- compatible : Should be one of:
+	"arm,cortex-a9-twd-wdt"
+	"arm,cortex-a5-twd-wdt"
+	"arm,arm11mp-twd-wdt"
+
+- interrupts : One interrupt to each core
+
+- reg : Specify the base address and the size of the TWD watchdog
+	register window.
+
+Example:
+
+	twd-watchdog@2c000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0xf01>;
+	};
diff --git a/dts/Bindings/timer/fsl,gtm.txt b/dts/Bindings/timer/fsl,gtm.txt
new file mode 100644
index 0000000000..9a33efded4
--- /dev/null
+++ b/dts/Bindings/timer/fsl,gtm.txt
@@ -0,0 +1,31 @@
+* Freescale General-purpose Timers Module
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-gtm", "fsl,gtm" for SOC GTMs
+    "fsl,<chip>-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs
+    "fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs
+  - reg : should contain gtm registers location and length (0x40).
+  - interrupts : should contain four interrupts.
+  - interrupt-parent : interrupt source phandle.
+  - clock-frequency : specifies the frequency driving the timer.
+
+Example:
+
+timer@500 {
+	compatible = "fsl,mpc8360-gtm", "fsl,gtm";
+	reg = <0x500 0x40>;
+	interrupts = <90 8 78 8 84 8 72 8>;
+	interrupt-parent = <&ipic>;
+	/* filled by u-boot */
+	clock-frequency = <0>;
+};
+
+timer@440 {
+	compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm";
+	reg = <0x440 0x40>;
+	interrupts = <12 13 14 15>;
+	interrupt-parent = <&qeic>;
+	/* filled by u-boot */
+	clock-frequency = <0>;
+};
diff --git a/dts/Bindings/timer/mrvl,mmp-timer.txt b/dts/Bindings/timer/mrvl,mmp-timer.txt
new file mode 100644
index 0000000000..9a6e251462
--- /dev/null
+++ b/dts/Bindings/timer/mrvl,mmp-timer.txt
@@ -0,0 +1,13 @@
+* Marvell MMP Timer controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-timer".
+- reg : Address and length of the register set of timer controller.
+- interrupts : Should be the interrupt number.
+
+Example:
+	timer0: timer@d4014000 {
+		compatible = "mrvl,mmp-timer";
+		reg = <0xd4014000 0x100>;
+		interrupts = <13>;
+	};
diff --git a/dts/Bindings/timer/qcom,msm-timer.txt b/dts/Bindings/timer/qcom,msm-timer.txt
new file mode 100644
index 0000000000..5e10c34554
--- /dev/null
+++ b/dts/Bindings/timer/qcom,msm-timer.txt
@@ -0,0 +1,47 @@
+* MSM Timer
+
+Properties:
+
+- compatible : Should at least contain "qcom,msm-timer". More specific
+               properties specify which subsystem the timers are paired with.
+
+               "qcom,kpss-timer" - krait subsystem
+               "qcom,scss-timer" - scorpion subsystem
+
+- interrupts : Interrupts for the debug timer, the first general purpose
+               timer, and optionally a second general purpose timer, and
+               optionally as well, 2 watchdog interrupts, in that order.
+
+- reg : Specifies the base address of the timer registers.
+
+- clocks: Reference to the parent clocks, one per output clock. The parents
+          must appear in the same order as the clock names.
+
+- clock-names: The name of the clocks as free-form strings. They should be in
+               the same order as the clocks.
+
+- clock-frequency : The frequency of the debug timer and the general purpose
+                    timer(s) in Hz in that order.
+
+Optional:
+
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+               CPU remapping facilities. The offset is
+               cpu-offset + (0x10000 * cpu-nr).
+
+Example:
+
+       timer@200a000 {
+               compatible = "qcom,scss-timer", "qcom,msm-timer";
+               interrupts = <1 1 0x301>,
+                            <1 2 0x301>,
+                            <1 3 0x301>,
+                            <1 4 0x301>,
+                            <1 5 0x301>;
+               reg = <0x0200a000 0x100>;
+               clock-frequency = <19200000>,
+                                 <32768>;
+               clocks = <&sleep_clk>;
+               clock-names = "sleep";
+               cpu-offset = <0x40000>;
+       };
diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt
index d740989eb5..b40add2d9b 100644
--- a/dts/Bindings/timer/renesas,cmt.txt
+++ b/dts/Bindings/timer/renesas,cmt.txt
@@ -22,6 +22,10 @@ Required Properties:
 
     - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
     - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
+    - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
+    - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
+    - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
+    - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
     - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
     - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
     - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
@@ -31,10 +35,12 @@ Required Properties:
     - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
     - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
 
-    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
-    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
-		These are fallbacks for r8a73a4 and all the R-Car Gen2
-		entries	listed above.
+    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
+		and RZ/G1.
+    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
+		and RZ/G1.
+		These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
+		listed above.
 
   - reg: base address and length of the registers block for the timer module.
   - interrupts: interrupt-specifier for the timer, one per channel.
diff --git a/dts/Bindings/timer/st,spear-timer.txt b/dts/Bindings/timer/st,spear-timer.txt
new file mode 100644
index 0000000000..c0017221cf
--- /dev/null
+++ b/dts/Bindings/timer/st,spear-timer.txt
@@ -0,0 +1,18 @@
+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+	"st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+	timer@f0000000 {
+		compatible = "st,spear-timer";
+		reg = <0xf0000000 0x400>;
+		interrupts = <2>;
+	};
diff --git a/dts/Bindings/timer/ti,c64x+timer64.txt b/dts/Bindings/timer/ti,c64x+timer64.txt
new file mode 100644
index 0000000000..95911fe702
--- /dev/null
+++ b/dts/Bindings/timer/ti,c64x+timer64.txt
@@ -0,0 +1,26 @@
+Timer64
+-------
+
+The timer64 node describes C6X event timers.
+
+Required properties:
+
+- compatible: must be "ti,c64x+timer64"
+- reg: base address and size of register region
+- interrupt-parent: interrupt controller
+- interrupts: interrupt id
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface.
+
+- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer.
+
+Example:
+	timer0: timer@25e0000 {
+		compatible = "ti,c64x+timer64";
+		ti,core-mask = < 0x01 >;
+		reg = <0x25e0000 0x40>;
+		interrupt-parent = <&megamod_pic>;
+		interrupts = < 16 >;
+	};
diff --git a/dts/Bindings/timer/ti,timer.txt b/dts/Bindings/timer/ti,timer.txt
new file mode 100644
index 0000000000..d02e27c764
--- /dev/null
+++ b/dts/Bindings/timer/ti,timer.txt
@@ -0,0 +1,44 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Should be set to one of the below. Please note that
+			OMAP44xx devices have timer instances that are 100%
+			register compatible with OMAP3xxx devices as well as
+			newer timers that are not 100% register compatible.
+			So for OMAP44xx devices timer instances may use
+			different compatible strings.
+
+			ti,omap2420-timer (applicable to OMAP24xx devices)
+			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
+			ti,omap4430-timer (applicable to OMAP44xx devices)
+			ti,omap5430-timer (applicable to OMAP543x devices)
+			ti,am335x-timer	(applicable to AM335x devices)
+			ti,am335x-timer-1ms (applicable to AM335x devices)
+
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap3430-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};
diff --git a/dts/Bindings/timer/via,vt8500-timer.txt b/dts/Bindings/timer/via,vt8500-timer.txt
new file mode 100644
index 0000000000..901c73f0d8
--- /dev/null
+++ b/dts/Bindings/timer/via,vt8500-timer.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Timer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-timer"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : interrupt for the timer
+
+Example:
+
+	timer@d8130100 {
+		compatible = "via,vt8500-timer";
+		reg = <0xd8130100 0x28>;
+		interrupts = <36>;
+	};