dts: update to v5.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 54 insertions, 5 deletions

diff --git a/dts/Bindings/ufs/cdns,ufshc.txt b/dts/Bindings/ufs/cdns,ufshc.txt
index a04a4989ec..02347b017a 100644
--- a/dts/Bindings/ufs/cdns,ufshc.txt
+++ b/dts/Bindings/ufs/cdns,ufshc.txt
@@ -5,8 +5,9 @@ Each UFS controller instance should have its own node.
 Please see the ufshcd-pltfrm.txt for a list of all available properties.
 
 Required properties:
-- compatible	: Compatible list, contains the following controller:
-			"cdns,ufshc"
+- compatible	: Compatible list, contains one of the following controllers:
+			"cdns,ufshc" - Generic CDNS HCI,
+			"cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY
 		  complemented with the JEDEC version:
 			"jedec,ufs-2.0"
 
diff --git a/dts/Bindings/ufs/ufs-mediatek.txt b/dts/Bindings/ufs/ufs-mediatek.txt
new file mode 100644
index 0000000000..72aab85473
--- /dev/null
+++ b/dts/Bindings/ufs/ufs-mediatek.txt
@@ -0,0 +1,43 @@
+* Mediatek Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS M-PHY node.
+
+Required properties for UFS nodes:
+- compatible         : Compatible list, contains the following controller:
+                       "mediatek,mt8183-ufshci" for MediaTek UFS host controller
+                       present on MT81xx chipsets.
+- reg                : Address and length of the UFS register set.
+- phys               : phandle to m-phy.
+- clocks             : List of phandle and clock specifier pairs.
+- clock-names        : List of clock input name strings sorted in the same
+                       order as the clocks property. "ufs" is mandatory.
+                       "ufs": ufshci core control clock.
+- freq-table-hz      : Array of <min max> operating frequencies stored in the same
+                       order as the clocks property. If this property is not
+                       defined or a value in the array is "0" then it is assumed
+                       that the frequency is set by the parent clock or a
+                       fixed rate clock source.
+- vcc-supply         : phandle to VCC supply regulator node.
+
+Example:
+
+	ufsphy: phy@11fa0000 {
+		...
+	};
+
+	ufshci@11270000 {
+		compatible = "mediatek,mt8183-ufshci";
+		reg = <0 0x11270000 0 0x2300>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&ufsphy>;
+
+		clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
+		clock-names = "ufs";
+		freq-table-hz = <0 0>;
+
+		vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+	};
diff --git a/dts/Bindings/ufs/ufs-qcom.txt b/dts/Bindings/ufs/ufs-qcom.txt
index 21d9a93db2..fd59f93e95 100644
--- a/dts/Bindings/ufs/ufs-qcom.txt
+++ b/dts/Bindings/ufs/ufs-qcom.txt
@@ -29,6 +29,7 @@ Optional properties:
 - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
 - vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
 - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- resets : specifies the PHY reset in the UFS controller
 
 Example:
 
@@ -51,9 +52,11 @@ Example:
 			<&clock_gcc clk_ufs_phy_ldo>,
 			<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
 			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+		resets = <&ufshc 0>;
 	};
 
-	ufshc@fc598000 {
+	ufshc: ufshc@fc598000 {
+		#reset-cells = <1>;
 		...
 		phys = <&ufsphy1>;
 		phy-names = "ufsphy";
diff --git a/dts/Bindings/ufs/ufshcd-pltfrm.txt b/dts/Bindings/ufs/ufshcd-pltfrm.txt
index 5111e9130b..a74720486e 100644
--- a/dts/Bindings/ufs/ufshcd-pltfrm.txt
+++ b/dts/Bindings/ufs/ufshcd-pltfrm.txt
@@ -11,6 +11,7 @@ Required properties:
 			  the appropriate jedec string:
 			    "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 			    "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+			    "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 			    "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
@@ -31,7 +32,6 @@ Optional properties:
 - vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
 - vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
 - vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
-- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator
 
 - clocks                : List of phandle and clock specifier pairs
 - clock-names           : List of clock input name strings sorted in the same
@@ -50,6 +50,8 @@ Optional properties:
 -lanes-per-direction	: number of lanes available per direction - either 1 or 2.
 			  Note that it is assume same number of lanes is used both
 			  directions at once. If not specified, default is 2 lanes per direction.
+- #reset-cells		: Must be <1> for Qualcomm UFS controllers that expose
+			  PHY reset from the UFS controller.
 - resets            : reset node register
 - reset-names       : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
 
@@ -63,7 +65,6 @@ Example:
 		interrupts = <0 28 0>;
 
 		vdd-hba-supply = <&xxx_reg0>;
-		vdd-hba-fixed-regulator;
 		vcc-supply = <&xxx_reg1>;
 		vcc-supply-1p8;
 		vccq-supply = <&xxx_reg2>;
@@ -79,4 +80,5 @@ Example:
 		reset-names = "rst";
 		phys = <&ufsphy1>;
 		phy-names = "ufsphy";
+		#reset-cells = <1>;
 	};