dts: update to v5.3-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 9 insertions, 3 deletions

diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
index 49eac0dc86..aafff3a690 100644
--- a/dts/Bindings/usb/dwc2.txt
+++ b/dts/Bindings/usb/dwc2.txt
@@ -42,6 +42,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
 - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- snps,need-phy-for-wake: If present indicates that the phy needs to be left
+                          on for remote wakeup during suspend.
 - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
                           we detect a wakeup.  This is due to a hardware errata.
 
@@ -58,4 +60,5 @@ Example:
 		clock-names = "otg";
 		phys = <&usbphy>;
 		phy-names = "usb2-phy";
+		snps,need-phy-for-wake;
         };
diff --git a/dts/Bindings/usb/dwc3.txt b/dts/Bindings/usb/dwc3.txt
index 8e5265e9f6..66780a47ad 100644
--- a/dts/Bindings/usb/dwc3.txt
+++ b/dts/Bindings/usb/dwc3.txt
@@ -64,6 +64,8 @@ Optional properties:
  - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
  - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
 			disabling the suspend signal to the PHY.
+ - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled.
+ - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled.
  - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
 			in PHY P3 power state.
  - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml
index d3b4f64159..059f6ef1ad 100644
--- a/dts/Bindings/usb/generic-ehci.yaml
+++ b/dts/Bindings/usb/generic-ehci.yaml
@@ -74,7 +74,7 @@ additionalProperties: false
 
 examples:
   - |
-    ehci@e0000300 {
+    usb@e0000300 {
         compatible = "ibm,usb-ehci-440epx", "generic-ehci";
         interrupt-parent = <&UIC0>;
         interrupts = <0x1a 4>;
@@ -89,7 +89,6 @@ examples:
         interrupts = <39>;
         clocks = <&ahb_gates 1>;
         phys = <&usbphy 1>;
-        phy-names = "usb";
     };
 
 ...
diff --git a/dts/Bindings/usb/renesas_usb3.txt b/dts/Bindings/usb/renesas,usb3.txt
index 35039e7205..35039e7205 100644
--- a/dts/Bindings/usb/renesas_usb3.txt
+++ b/dts/Bindings/usb/renesas,usb3.txt
diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas,usbhs.txt
index b8acc2a994..e39255ea6e 100644
--- a/dts/Bindings/usb/renesas_usbhs.txt
+++ b/dts/Bindings/usb/renesas,usbhs.txt
@@ -20,9 +20,11 @@ Required properties:
 	- "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device
 	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
 	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
+	- "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
 	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices
 	- "renesas,rza1-usbhs" for RZ/A1 compatible device
+	- "renesas,rza2-usbhs" for RZ/A2 compatible device
 
 	When compatible with the generic version, nodes must list the
 	SoC-specific version corresponding to the platform first followed
diff --git a/dts/Bindings/usb/s3c2410-usb.txt b/dts/Bindings/usb/s3c2410-usb.txt
index e45b38ce29..26c85afd0b 100644
--- a/dts/Bindings/usb/s3c2410-usb.txt
+++ b/dts/Bindings/usb/s3c2410-usb.txt
@@ -4,7 +4,7 @@ OHCI
 
 Required properties:
  - compatible: should be "samsung,s3c2410-ohci" for USB host controller
- - reg: address and lenght of the controller memory mapped region
+ - reg: address and length of the controller memory mapped region
  - interrupts: interrupt number for the USB OHCI controller
  - clocks: Should reference the bus and host clocks
  - clock-names: Should contain two strings