dts: update to v4.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

8 files changed, 237 insertions, 8 deletions

diff --git a/dts/Bindings/usb/atmel-usb.txt b/dts/Bindings/usb/atmel-usb.txt
index f4262ed605..ad8ea56a9e 100644
--- a/dts/Bindings/usb/atmel-usb.txt
+++ b/dts/Bindings/usb/atmel-usb.txt
@@ -6,9 +6,9 @@ Required properties:
  - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
    used in host mode.
  - reg: Address and length of the register set for the device
- - interrupts: Should contain ehci interrupt
+ - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain three strings
 		"ohci_clk" for the peripheral clock
 		"hclk" for the host clock
 		"uhpck" for the system clock
@@ -35,7 +35,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
@@ -58,7 +58,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain macb interrupt
  - clocks: Should reference the peripheral and the AHB clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the AHB clock
 
@@ -85,7 +85,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
  - ep childnode: To specify the number of endpoints and their properties.
diff --git a/dts/Bindings/usb/da8xx-usb.txt b/dts/Bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000000..ccb844aba7
--- /dev/null
+++ b/dts/Bindings/usb/da8xx-usb.txt
@@ -0,0 +1,43 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - phys: Phandle for the PHY device
+
+ - phy-names: Should be "usb-phy"
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - vbus-supply: Phandle to a regulator providing the USB bus power.
+
+Example:
+	usb_phy: usb-phy {
+		compatible = "ti,da830-usb-phy";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+	usb0: usb@200000 {
+		compatible = "ti,da830-musb";
+		reg =   <0x00200000 0x10000>;
+		interrupts = <58>;
+		interrupt-names = "mc";
+
+		dr_mode = "host";
+		vbus-supply = <&usb_vbus>;
+		phys = <&usb_phy 0>;
+		phy-names = "usb-phy";
+
+		status = "okay";
+	};
diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
index 2c30a54790..6c7c2bce6d 100644
--- a/dts/Bindings/usb/dwc2.txt
+++ b/dts/Bindings/usb/dwc2.txt
@@ -12,6 +12,7 @@ Required properties:
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
   - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
+  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
@@ -25,11 +26,13 @@ Optional properties:
 Refer to phy/phy-bindings.txt for generic phy consumer properties
 - dr_mode: shall be one of "host", "peripheral" and "otg"
   Refer to usb/generic.txt
-- g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
 - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
+Deprecated properties:
+- g-use-dma: gadget DMA mode is automatically detected
+
 Example:
 
         usb@101c0000 {
diff --git a/dts/Bindings/usb/mt8173-mtu3.txt b/dts/Bindings/usb/mt8173-mtu3.txt
new file mode 100644
index 0000000000..e049d199bf
--- /dev/null
+++ b/dts/Bindings/usb/mt8173-mtu3.txt
@@ -0,0 +1,87 @@
+The device node for Mediatek USB3.0 DRD controller
+
+Required properties:
+ - compatible : should be "mediatek,mt8173-mtu3"
+ - reg : specifies physical base address and size of the registers
+ - reg-names: should be "mac" for device IP and "ippc" for IP port control
+ - interrupts : interrupt used by the device IP
+ - power-domains : a phandle to USB power domain node to control USB's
+	mtcmos
+ - vusb33-supply : regulator of USB avdd3.3v
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+	entry in clock-names
+ - clock-names : must contain "sys_ck" for clock of controller;
+	"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
+	depends on "mediatek,enable-wakeup"
+ - phys : a list of phandle + phy specifier pairs
+ - dr_mode : should be one of "host", "peripheral" or "otg",
+	refer to usb/generic.txt
+
+Optional properties:
+ - #address-cells, #size-cells : should be '2' if the device has sub-nodes
+	with 'reg' property
+ - ranges : allows valid 1:1 translation between child's address space and
+	parent's address space
+ - extcon : external connector for vbus and idpin changes detection, needed
+	when supports dual-role mode.
+ - vbus-supply : reference to the VBUS regulator, needed when supports
+	dual-role mode.
+ - pinctl-names : a pinctrl state named "default" must be defined,
+	"id_float" and "id_ground" are optinal which depends on
+	"mediatek,enable-manual-drd"
+ - pinctrl-0 : pin control group
+	See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - maximum-speed : valid arguments are "super-speed", "high-speed" and
+	"full-speed"; refer to usb/generic.txt
+ - enable-manual-drd : supports manual dual-role switch via debugfs; usually
+	used when receptacle is TYPE-A and also wants to support dual-role
+	mode.
+ - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
+ - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
+	control register, it depends on "mediatek,enable-wakeup".
+
+Sub-nodes:
+The xhci should be added as subnode to mtu3 as shown in the following example
+if host mode is enabled. The DT binding details of xhci can be found in:
+Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+
+Example:
+ssusb: usb@11271000 {
+	compatible = "mediatek,mt8173-mtu3";
+	reg = <0 0x11271000 0 0x3000>,
+	      <0 0x11280700 0 0x0100>;
+	reg-names = "mac", "ippc";
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+	phys = <&phy_port0 PHY_TYPE_USB3>,
+	       <&phy_port1 PHY_TYPE_USB2>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	clocks = <&topckgen CLK_TOP_USB30_SEL>,
+		 <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB1>;
+	clock-names = "sys_ck",
+		      "wakeup_deb_p0",
+		      "wakeup_deb_p1";
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	mediatek,enable-wakeup;
+	mediatek,syscon-wakeup = <&pericfg>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+	status = "disabled";
+
+	usb_host: xhci@11270000 {
+		compatible = "mediatek,mt8173-xhci";
+		reg = <0 0x11270000 0 0x1000>;
+		reg-names = "mac";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+		clocks = <&topckgen CLK_TOP_USB30_SEL>;
+		clock-names = "sys_ck";
+		vusb33-supply = <&mt6397_vusb_reg>;
+		status = "disabled";
+	};
+};
diff --git a/dts/Bindings/usb/mt8173-xhci.txt b/dts/Bindings/usb/mt8173-xhci.txt
index b3a7ffa488..2a930bd52b 100644
--- a/dts/Bindings/usb/mt8173-xhci.txt
+++ b/dts/Bindings/usb/mt8173-xhci.txt
@@ -2,10 +2,18 @@ MT8173 xHCI
 
 The device node for Mediatek SOC USB3.0 host controller
 
+There are two scenarios: the first one only supports xHCI driver;
+the second one supports dual-role mode, and the host is based on xHCI
+driver. Take account of backward compatibility, we divide bindings
+into two parts.
+
+1st: only supports xHCI driver
+------------------------------------------------------------------------
+
 Required properties:
  - compatible : should contain "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers,
-	the first one for MAC, the second for IPPC
+ - reg : specifies physical base address and size of the registers
+ - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
  - interrupts : interrupt used by the controller
  - power-domains : a phandle to USB power domain node to control USB's
 	mtcmos
@@ -27,12 +35,16 @@ Optional properties:
 	control register, it depends on "mediatek,wakeup-src".
  - vbus-supply : reference to the VBUS regulator;
  - usb3-lpm-capable : supports USB3.0 LPM
+ - pinctrl-names : a pinctrl state named "default" must be defined
+ - pinctrl-0 : pin control group
+	See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
 
 Example:
 usb30: usb@11270000 {
 	compatible = "mediatek,mt8173-xhci";
 	reg = <0 0x11270000 0 0x1000>,
 	      <0 0x11280700 0 0x0100>;
+	reg-names = "mac", "ippc";
 	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
 	clocks = <&topckgen CLK_TOP_USB30_SEL>,
@@ -49,3 +61,41 @@ usb30: usb@11270000 {
 	mediatek,syscon-wakeup = <&pericfg>;
 	mediatek,wakeup-src = <1>;
 };
+
+2nd: dual-role mode with xHCI driver
+------------------------------------------------------------------------
+
+In the case, xhci is added as subnode to mtu3. An example and the DT binding
+details of mtu3 can be found in:
+Documentation/devicetree/bindings/usb/mtu3.txt
+
+Required properties:
+ - compatible : should contain "mediatek,mt8173-xhci"
+ - reg : specifies physical base address and size of the registers
+ - reg-names: should be "mac" for xHCI MAC
+ - interrupts : interrupt used by the host controller
+ - power-domains : a phandle to USB power domain node to control USB's
+	mtcmos
+ - vusb33-supply : regulator of USB avdd3.3v
+
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+	entry in clock-names
+ - clock-names : must be
+	"sys_ck": for clock of xHCI MAC
+
+Optional properties:
+ - vbus-supply : reference to the VBUS regulator;
+ - usb3-lpm-capable : supports USB3.0 LPM
+
+Example:
+usb30: usb@11270000 {
+	compatible = "mediatek,mt8173-xhci";
+	reg = <0 0x11270000 0 0x1000>;
+	reg-names = "mac";
+	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	clocks = <&topckgen CLK_TOP_USB30_SEL>;
+	clock-names = "sys_ck";
+	vusb33-supply = <&mt6397_vusb_reg>;
+	usb3-lpm-capable;
+};
diff --git a/dts/Bindings/usb/ohci-da8xx.txt b/dts/Bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000000..2dc8f67eda
--- /dev/null
+++ b/dts/Bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,23 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg:        Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys:       Phandle for the PHY device
+ - phy-names:  Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: phandle of regulator that controls vbus power / over-current
+
+Example:
+
+ohci: usb@0225000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb_ohci>;
+};
diff --git a/dts/Bindings/usb/s3c2410-usb.txt b/dts/Bindings/usb/s3c2410-usb.txt
new file mode 100644
index 0000000000..e45b38ce29
--- /dev/null
+++ b/dts/Bindings/usb/s3c2410-usb.txt
@@ -0,0 +1,22 @@
+Samsung S3C2410 and compatible SoC USB controller
+
+OHCI
+
+Required properties:
+ - compatible: should be "samsung,s3c2410-ohci" for USB host controller
+ - reg: address and lenght of the controller memory mapped region
+ - interrupts: interrupt number for the USB OHCI controller
+ - clocks: Should reference the bus and host clocks
+ - clock-names: Should contain two strings
+		"usb-bus-host" for the USB bus clock
+		"usb-host" for the USB host clock
+
+Example:
+
+usb0: ohci@49000000 {
+	compatible = "samsung,s3c2410-ohci";
+	reg = <0x49000000 0x100>;
+	interrupts = <0 0 26 3>;
+	clocks = <&clocks UCLK>, <&clocks HCLK_USBH>;
+	clock-names = "usb-bus-host", "usb-host";
+};
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index 966885c636..0b7d857600 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -11,6 +11,7 @@ Required properties:
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
+    - "renesas,xhci-r8a7796" for r8a7796 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
     - "xhci-platform" (deprecated)