dts: update to v5.12-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

39 files changed, 1657 insertions, 720 deletions

diff --git a/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml b/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml
index d9207bf9d8..0f520f1773 100644
--- a/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml
+++ b/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml
@@ -39,7 +39,7 @@ properties:
     maxItems: 1
 
   phys:
-    description: PHY specifier for the OTG PHY
+    maxItems: 1
 
   phy-names:
     const: usb
diff --git a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index c0058332b9..e349fa5de6 100644
--- a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -79,7 +79,9 @@ properties:
 
 patternProperties:
   "^usb@[0-9a-f]+$":
-    type: object
+    oneOf:
+      - $ref: dwc2.yaml#
+      - $ref: snps,dwc3.yaml#
 
 additionalProperties: false
 
@@ -229,6 +231,6 @@ examples:
               interrupts = <30>;
               dr_mode = "host";
               snps,dis_u2_susphy_quirk;
-              snps,quirk-frame-length-adjustment;
+              snps,quirk-frame-length-adjustment = <0x20>;
           };
     };
diff --git a/dts/Bindings/usb/brcm,usb-pinmap.yaml b/dts/Bindings/usb/brcm,usb-pinmap.yaml
index ffa148b9ea..d4618d15ec 100644
--- a/dts/Bindings/usb/brcm,usb-pinmap.yaml
+++ b/dts/Bindings/usb/brcm,usb-pinmap.yaml
@@ -22,6 +22,8 @@ properties:
     description: Interrupt for signals mirrored to out-gpios.
 
   in-gpios:
+    minItems: 1
+    maxItems: 2
     description: Array of one or two GPIO pins used for input signals.
 
   brcm,in-functions:
@@ -33,6 +35,7 @@ properties:
     description: Array of enable and mask pairs, one per gpio in-gpios.
 
   out-gpios:
+    maxItems: 1
     description: Array of one GPIO pin used for output signals.
 
   brcm,out-functions:
diff --git a/dts/Bindings/usb/dwc3-st.txt b/dts/Bindings/usb/dwc3-st.txt
index df0e02e1ee..bf73de0d5b 100644
--- a/dts/Bindings/usb/dwc3-st.txt
+++ b/dts/Bindings/usb/dwc3-st.txt
@@ -31,13 +31,13 @@ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 Sub-nodes:
 The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
 example below. The DT binding details of dwc3 can be found in:
-Documentation/devicetree/bindings/usb/dwc3.txt
+Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
 is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
 or "device".
 
-[1] Documentation/devicetree/bindings/usb/generic.txt
+[1] Documentation/devicetree/bindings/usb/usb-drd.yaml
 
 Example:
 
diff --git a/dts/Bindings/usb/dwc3-xilinx.txt b/dts/Bindings/usb/dwc3-xilinx.txt
index 4aae5b2cef..a668f43bed 100644
--- a/dts/Bindings/usb/dwc3-xilinx.txt
+++ b/dts/Bindings/usb/dwc3-xilinx.txt
@@ -19,7 +19,7 @@ Example device node:
 			#address-cells = <0x2>;
 			#size-cells = <0x1>;
 			compatible = "xlnx,zynqmp-dwc3";
-			clock-names = "bus_clk" "ref_clk";
+			clock-names = "bus_clk", "ref_clk";
 			clocks = <&clk125>, <&clk125>;
 			ranges;
 
diff --git a/dts/Bindings/usb/dwc3.txt b/dts/Bindings/usb/dwc3.txt
deleted file mode 100644
index 1aae2b6160..0000000000
--- a/dts/Bindings/usb/dwc3.txt
+++ /dev/null
@@ -1,128 +0,0 @@
-synopsys DWC3 CORE
-
-DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties
-      as described in 'usb/generic.txt'
-
-Required properties:
- - compatible: must be "snps,dwc3"
- - reg : Address and length of the register set for the device
- - interrupts: Interrupts used by the dwc3 controller.
- - clock-names: list of clock names. Ideally should be "ref",
-                "bus_early", "suspend" but may be less or more.
- - clocks: list of phandle and clock specifier pairs corresponding to
-           entries in the clock-names property.
-
-Exception for clocks:
-  clocks are optional if the parent node (i.e. glue-layer) is compatible to
-  one of the following:
-    "cavium,octeon-7130-usb-uctl"
-    "qcom,dwc3"
-    "samsung,exynos5250-dwusb3"
-    "samsung,exynos5433-dwusb3"
-    "samsung,exynos7-dwusb3"
-    "sprd,sc9860-dwc3"
-    "st,stih407-dwc3"
-    "ti,am437x-dwc3"
-    "ti,dwc3"
-    "ti,keystone-dwc3"
-    "rockchip,rk3399-dwc3"
-    "xlnx,zynqmp-dwc3"
-
-Optional properties:
- - usb-phy : array of phandle for the PHY device.  The first element
-   in the array is expected to be a handle to the USB2/HS PHY and
-   the second element is expected to be a handle to the USB3/SS PHY
- - phys: from the *Generic PHY* bindings
- - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
-	or "usb3-phy".
- - resets: set of phandle and reset specifier pairs
- - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
- - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command
-			failure SW work-around for DWC_usb31 version 1.70a-ea06
-			and prior.
- - snps,disable_scramble_quirk: true when SW should disable data scrambling.
-	Only really useful for FPGA builds.
- - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
- - snps,lpm-nyet-threshold: LPM NYET threshold
- - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
- - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
- - snps,req_p1p2p3_quirk: when set, the core will always request for
-			P1/P2/P3 transition sequence.
- - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
-			amount of 8B10B errors occur.
- - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
-			from P0 to P1/P2/P3.
- - snps,lfps_filter_quirk: when set core will filter LFPS reception.
- - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
-			Polling LFPS after RX.Detect.
- - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
- - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
-			LTSSM during USB3 Compliance mode.
- - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
- - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
- - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
-			disabling the suspend signal to the PHY.
- - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled.
- - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled.
- - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
-			in PHY P3 power state.
- - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
-			in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
-			a free-running PHY clock.
- - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
-			from P0 to P1/P2/P3 without delay.
- - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
-			during HS transmit.
- - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in
-			park mode are disabled.
- - snps,dis_metastability_quirk: when set, disable metastability workaround.
-			CAUTION: use only if you are absolutely sure of it.
- - snps,dis-split-quirk: when set, change the way URBs are handled by the
-			 driver. Needed to avoid -EPROTO errors with usbhid
-			 on some devices (Hikey 970).
- - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
-			utmi_l1_suspend_n, false when asserts utmi_sleep_n
- - snps,hird-threshold: HIRD threshold
- - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
-   UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
- - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
-	register for post-silicon frame length adjustment when the
-	fladj_30mhz_sdbnd signal is invalid or incorrect.
- - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode
-			only. Set this and rx-max-burst-prd to a valid,
-			non-zero value 1-16 (DWC_usb31 programming guide
-			section 1.2.4) to enable periodic ESS RX threshold.
- - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set
-			this and rx-thr-num-pkt-prd to a valid, non-zero value
-			1-16 (DWC_usb31 programming guide section 1.2.4) to
-			enable periodic ESS RX threshold.
- - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode
-			only. Set this and tx-max-burst-prd to a valid,
-			non-zero value 1-16 (DWC_usb31 programming guide
-			section 1.2.3) to enable periodic ESS TX threshold.
- - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set
-			this and tx-thr-num-pkt-prd to a valid, non-zero value
-			1-16 (DWC_usb31 programming guide section 1.2.3) to
-			enable periodic ESS TX threshold.
-
- - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
-			register, undefined length INCR burst type enable and INCRx type.
-			When just one value, which means INCRX burst mode enabled. When
-			more than one value, which means undefined length INCR burst type
-			enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256.
-
- - in addition all properties from usb-xhci.txt from the current directory are
-   supported as well
-
-
-This is usually a subnode to DWC3 glue to which it is connected.
-
-dwc3@4a030000 {
-	compatible = "snps,dwc3";
-	reg = <0x4a030000 0xcfff>;
-	interrupts = <0 92 4>
-	usb-phy = <&usb2_phy>, <&usb3,phy>;
-	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-};
diff --git a/dts/Bindings/usb/exynos-usb.txt b/dts/Bindings/usb/exynos-usb.txt
index 6aae1544f2..f7ae79825d 100644
--- a/dts/Bindings/usb/exynos-usb.txt
+++ b/dts/Bindings/usb/exynos-usb.txt
@@ -93,7 +93,7 @@ Sub-nodes:
 The dwc3 core should be added as subnode to Exynos dwc3 glue.
 - dwc3 :
    The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 Example:
 	usb@12000000 {
diff --git a/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml
new file mode 100644
index 0000000000..cb4c6f6d3a
--- /dev/null
+++ b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8MP Soc USB Controller
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-dwc3
+
+  reg:
+    maxItems: 1
+    description: Address and length of the register set for the wrapper of
+      dwc3 core on the SOC.
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  dma-ranges:
+    description:
+      See section 2.3.9 of the DeviceTree Specification.
+
+  ranges: true
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt that is asserted when a wakeup event is
+      received.
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: system hsio root clock.
+      - description: suspend clock, used for usb wakeup logic.
+
+  clock-names:
+    items:
+      - const: hsio
+      - const: suspend
+
+# Required child node:
+
+patternProperties:
+  "^dwc3@[0-9a-f]+$":
+    type: object
+    description:
+      A child node must exist to represent the core DWC3 IP block
+      The content of the node is defined in dwc3.txt.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dma-ranges
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb3_0: usb@32f10100 {
+      compatible = "fsl,imx8mp-dwc3";
+      reg = <0x32f10100 0x8>;
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_USB_ROOT>;
+      clock-names = "hsio", "suspend";
+      interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+      ranges;
+
+      dwc3@38100000 {
+        compatible = "snps,dwc3";
+        reg = <0x38100000 0x10000>;
+        clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+                 <&clk IMX8MP_CLK_USB_CORE_REF>,
+                 <&clk IMX8MP_CLK_USB_ROOT>;
+        clock-names = "bus_early", "ref", "suspend";
+        assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+        assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+        assigned-clock-rates = <500000000>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&usb3_phy0>, <&usb3_phy0>;
+        phy-names = "usb2-phy", "usb3-phy";
+        snps,dis-u2-freeclk-exists-quirk;
+      };
+    };
diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml
index 247ef00381..cf83f2d9af 100644
--- a/dts/Bindings/usb/generic-ehci.yaml
+++ b/dts/Bindings/usb/generic-ehci.yaml
@@ -24,8 +24,53 @@ allOf:
 
 properties:
   compatible:
-    contains:
-      const: generic-ehci
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ehci
+              - allwinner,sun50i-a64-ehci
+              - allwinner,sun50i-h6-ehci
+              - allwinner,sun5i-a13-ehci
+              - allwinner,sun6i-a31-ehci
+              - allwinner,sun7i-a20-ehci
+              - allwinner,sun8i-a23-ehci
+              - allwinner,sun8i-h3-ehci
+              - allwinner,sun8i-r40-ehci
+              - allwinner,sun9i-a80-ehci
+              - aspeed,ast2400-ehci
+              - aspeed,ast2500-ehci
+              - aspeed,ast2600-ehci
+              - brcm,bcm3384-ehci
+              - brcm,bcm63268-ehci
+              - brcm,bcm6328-ehci
+              - brcm,bcm6358-ehci
+              - brcm,bcm6362-ehci
+              - brcm,bcm6368-ehci
+              - brcm,bcm7125-ehci
+              - brcm,bcm7346-ehci
+              - brcm,bcm7358-ehci
+              - brcm,bcm7360-ehci
+              - brcm,bcm7362-ehci
+              - brcm,bcm7420-ehci
+              - brcm,bcm7425-ehci
+              - brcm,bcm7435-ehci
+              - ibm,476gtr-ehci
+              - nxp,lpc1850-ehci
+              - qca,ar7100-ehci
+              - snps,hsdk-v1.0-ehci
+              - socionext,uniphier-ehci
+          - const: generic-ehci
+      - items:
+          - enum:
+              - cavium,octeon-6335-ehci
+              - ibm,usb-ehci-440epx
+              - ibm,usb-ehci-460ex
+              - nintendo,hollywood-usb-ehci
+              - st,spear600-ehci
+          - const: usb-ehci
+      - enum:
+          - generic-ehci
+          - usb-ehci
 
   reg:
     minItems: 1
@@ -83,7 +128,7 @@ properties:
       Phandle of a companion.
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   phy-names:
     const: usb
@@ -101,7 +146,7 @@ additionalProperties: false
 examples:
   - |
     usb@e0000300 {
-        compatible = "ibm,usb-ehci-440epx", "generic-ehci";
+        compatible = "ibm,usb-ehci-440epx", "usb-ehci";
         interrupt-parent = <&UIC0>;
         interrupts = <0x1a 4>;
         reg = <0xe0000300 90>, <0xe0000390 70>;
diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml
index 2178bcc401..0f5f6ea702 100644
--- a/dts/Bindings/usb/generic-ohci.yaml
+++ b/dts/Bindings/usb/generic-ohci.yaml
@@ -14,8 +14,38 @@ maintainers:
 
 properties:
   compatible:
-    contains:
-      const: generic-ohci
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ohci
+              - allwinner,sun50i-a64-ohci
+              - allwinner,sun50i-h6-ohci
+              - allwinner,sun5i-a13-ohci
+              - allwinner,sun6i-a31-ohci
+              - allwinner,sun7i-a20-ohci
+              - allwinner,sun8i-a23-ohci
+              - allwinner,sun8i-h3-ohci
+              - allwinner,sun8i-r40-ohci
+              - allwinner,sun9i-a80-ohci
+              - brcm,bcm3384-ohci
+              - brcm,bcm63268-ohci
+              - brcm,bcm6328-ohci
+              - brcm,bcm6358-ohci
+              - brcm,bcm6362-ohci
+              - brcm,bcm6368-ohci
+              - brcm,bcm7125-ohci
+              - brcm,bcm7346-ohci
+              - brcm,bcm7358-ohci
+              - brcm,bcm7360-ohci
+              - brcm,bcm7362-ohci
+              - brcm,bcm7420-ohci
+              - brcm,bcm7425-ohci
+              - brcm,bcm7435-ohci
+              - ibm,476gtr-ohci
+              - ingenic,jz4740-ohci
+              - snps,hsdk-v1.0-ohci
+          - const: generic-ohci
+      - const: generic-ohci
 
   reg:
     maxItems: 1
@@ -71,7 +101,7 @@ properties:
       Overrides the detected port count
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   phy-names:
     const: usb
diff --git a/dts/Bindings/usb/generic-xhci.yaml b/dts/Bindings/usb/generic-xhci.yaml
new file mode 100644
index 0000000000..23d73df96e
--- /dev/null
+++ b/dts/Bindings/usb/generic-xhci.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB xHCI Controller Device Tree Bindings
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: "usb-xhci.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic xHCI device
+        const: generic-xhci
+      - description: Armada 37xx/375/38x/8k SoCs
+        items:
+          - enum:
+              - marvell,armada3700-xhci
+              - marvell,armada-375-xhci
+              - marvell,armada-380-xhci
+              - marvell,armada-8k-xhci
+          - const: generic-xhci
+      - description: Broadcom STB SoCs with xHCI
+        enum:
+          - brcm,xhci-brcm-v2
+          - brcm,bcm7445-xhci
+      - description: Generic xHCI device
+        const: xhci-platform
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@f0931000 {
+      compatible = "generic-xhci";
+      reg = <0xf0931000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+    };
diff --git a/dts/Bindings/usb/generic.txt b/dts/Bindings/usb/generic.txt
deleted file mode 100644
index ba472e7aef..0000000000
--- a/dts/Bindings/usb/generic.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Generic USB Properties
-
-Optional properties:
- - maximum-speed: tells USB controllers we want to work up to a certain
-			speed. Valid arguments are "super-speed-plus",
-			"super-speed", "high-speed", "full-speed" and
-			"low-speed". In case this isn't passed via DT, USB
-			controllers should default to their maximum HW
-			capability.
- - dr_mode: tells Dual-Role USB controllers that we want to work on a
-			particular mode. Valid arguments are "host",
-			"peripheral" and "otg". In case this attribute isn't
-			passed via DT, USB DRD controllers should default to
-			OTG.
- - phy_type: tells USB controllers that we want to configure the core to support
-			a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
-			selected. Valid arguments are "utmi" and "utmi_wide".
-			In case this isn't passed via DT, USB controllers should
-			default to HW capability.
- - otg-rev: tells usb driver the release number of the OTG and EH supplement
-			with which the device and its descriptors are compliant,
-			in binary-coded decimal (i.e. 2.0 is 0200H). This
-			property is used if any real OTG features(HNP/SRP/ADP)
-			is enabled, if ADP is required, otg-rev should be
-			0x0200 or above.
- - companion: phandle of a companion
- - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
-			is the basic function of real OTG except you want it
-			to be a srp-capable only B device.
- - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
-			optional for OTG device.
- - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
-			optional for OTG device.
- - usb-role-switch: boolean, indicates that the device is capable of assigning
-			the USB data role (USB host or USB device) for a given
-			USB connector, such as Type-C, Type-B(micro).
-			see connector/usb-connector.yaml.
- - role-switch-default-mode: indicating if usb-role-switch is enabled, the
-			device default operation mode of controller while usb
-			role is USB_ROLE_NONE. Valid arguments are "host" and
-			"peripheral". Defaults to "peripheral" if not
-			specified.
-
-
-This is an attribute to a USB controller such as:
-
-dwc3@4a030000 {
-	compatible = "synopsys,dwc3";
-	reg = <0x4a030000 0xcfff>;
-	interrupts = <0 92 4>
-	usb-phy = <&usb2_phy>, <&usb3,phy>;
-	maximum-speed = "super-speed";
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	otg-rev = <0x0200>;
-	adp-disable;
-};
diff --git a/dts/Bindings/usb/ingenic,musb.yaml b/dts/Bindings/usb/ingenic,musb.yaml
index 678396eeeb..f506225a4d 100644
--- a/dts/Bindings/usb/ingenic,musb.yaml
+++ b/dts/Bindings/usb/ingenic,musb.yaml
@@ -40,7 +40,7 @@ properties:
       - const: mc
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   usb-role-switch:
     type: boolean
diff --git a/dts/Bindings/usb/intel,keembay-dwc3.yaml b/dts/Bindings/usb/intel,keembay-dwc3.yaml
index dd32c10ce6..43b91ab620 100644
--- a/dts/Bindings/usb/intel,keembay-dwc3.yaml
+++ b/dts/Bindings/usb/intel,keembay-dwc3.yaml
@@ -34,11 +34,8 @@ properties:
 # Required child node:
 
 patternProperties:
-  "^dwc3@[0-9a-f]+$":
-    type: object
-    description:
-      A child node must exist to represent the core DWC3 IP block.
-      The content of the node is defined in dwc3.txt.
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
 
 required:
   - compatible
@@ -68,7 +65,7 @@ examples:
           #address-cells = <1>;
           #size-cells = <1>;
 
-          dwc3@34000000 {
+          usb@34000000 {
                 compatible = "snps,dwc3";
                 reg = <0x34000000 0x10000>;
                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/usb/mediatek,mtk-xhci.txt b/dts/Bindings/usb/mediatek,mtk-xhci.txt
deleted file mode 100644
index 42d8814f90..0000000000
--- a/dts/Bindings/usb/mediatek,mtk-xhci.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-MT8173 xHCI
-
-The device node for Mediatek SOC USB3.0 host controller
-
-There are two scenarios: the first one only supports xHCI driver;
-the second one supports dual-role mode, and the host is based on xHCI
-driver. Take account of backward compatibility, we divide bindings
-into two parts.
-
-1st: only supports xHCI driver
-------------------------------------------------------------------------
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
-	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
-	addition, one of:
-	- "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
- - interrupts : interrupt used by the controller
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain
-	"sys_ck": controller clock used by normal mode,
-	the following ones are optional:
-	"ref_ck": reference clock used by low power mode etc,
-	"mcu_ck": mcu_bus clock for register access,
-	"dma_ck": dma_bus clock for data transfer by DMA,
-	"xhci_ck": controller clock
-
- - phys : see usb-hcd.yaml in the current directory
-
-Optional properties:
- - wakeup-source : enable USB remote wakeup;
- - mediatek,syscon-wakeup : phandle to syscon used to access the register
-	of the USB wakeup glue layer between xHCI and SPM; it depends on
-	"wakeup-source", and has two arguments:
-	- the first one : register base address of the glue layer in syscon;
-	- the second one : hardware version of the glue layer
-		- 1 : used by mt8173 etc
-		- 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-	bit1 for u3port1, ... etc;
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
- - pinctrl-names : a pinctrl state named "default" must be defined
- - pinctrl-0 : pin control group
-	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- - imod-interval-ns: default interrupt moderation interval is 5000ns
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Example:
-usb30: usb@11270000 {
-	compatible = "mediatek,mt8173-xhci";
-	reg = <0 0x11270000 0 0x1000>,
-	      <0 0x11280700 0 0x0100>;
-	reg-names = "mac", "ippc";
-	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
-		 <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck";
-	phys = <&phy_port0 PHY_TYPE_USB3>,
-	       <&phy_port1 PHY_TYPE_USB2>;
-	vusb33-supply = <&mt6397_vusb_reg>;
-	vbus-supply = <&usb_p1_vbus>;
-	usb3-lpm-capable;
-	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
-	wakeup-source;
-	imod-interval-ns = <10000>;
-};
-
-2nd: dual-role mode with xHCI driver
-------------------------------------------------------------------------
-
-In the case, xhci is added as subnode to mtu3. An example and the DT binding
-details of mtu3 can be found in:
-Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
-	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
-	addition, one of:
-	- "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC
- - interrupts : interrupt used by the host controller
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain "sys_ck", and the following ones are optional:
-	"ref_ck", "mcu_ck" and "dma_ck", "xhci_ck"
-
-Optional properties:
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
-
-Example:
-usb30: usb@11270000 {
-	compatible = "mediatek,mt8173-xhci";
-	reg = <0 0x11270000 0 0x1000>;
-	reg-names = "mac";
-	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
-	clock-names = "sys_ck", "ref_ck";
-	vusb33-supply = <&mt6397_vusb_reg>;
-	usb3-lpm-capable;
-};
diff --git a/dts/Bindings/usb/mediatek,mtk-xhci.yaml b/dts/Bindings/usb/mediatek,mtk-xhci.yaml
new file mode 100644
index 0000000000..14f40efb3b
--- /dev/null
+++ b/dts/Bindings/usb/mediatek,mtk-xhci.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 xHCI Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: "usb-xhci.yaml"
+
+description: |
+  There are two scenarios:
+  case 1: only supports xHCI driver;
+  case 2: supports dual-role mode, and the host is based on xHCI driver.
+
+properties:
+  # common properties for both case 1 and case 2
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-xhci
+          - mediatek,mt2712-xhci
+          - mediatek,mt7622-xhci
+          - mediatek,mt7623-xhci
+          - mediatek,mt7629-xhci
+          - mediatek,mt8173-xhci
+          - mediatek,mt8183-xhci
+      - const: mediatek,mtk-xhci
+
+  reg:
+    minItems: 1
+    items:
+      - description: the registers of xHCI MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: ippc  # optional, only needed for case 1.
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+      - description: controller clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, the following ones are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+      - const: xhci_ck
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 5
+
+  phys:
+    description:
+      List of all PHYs used on this HCD, it's better to keep PHYs in order
+      as the hardware layout
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    description: Regulator of USB VBUS5v
+
+  usb3-lpm-capable:
+    description: supports USB3.0 LPM
+    type: boolean
+
+  imod-interval-ns:
+    description:
+      Interrupt moderation interval value, it is 8 times as much as that
+      defined in the xHCI spec on MTK's controller.
+    default: 5000
+
+  # the following properties are only used for case 1
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description:
+            The third cell represents the hardware version of the glue layer,
+            1 is used by mt8173 etc, 2 is used by mt2712 etc
+          enum: [1, 2]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[0-9a-f]{1}$":
+    type: object
+    description: The hard wired USB devices.
+
+dependencies:
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11270000 {
+        compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+        reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+        clock-names = "sys_ck", "ref_ck";
+        phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p1_vbus>;
+        imod-interval-ns = <10000>;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        usb3-lpm-capable;
+    };
+...
diff --git a/dts/Bindings/usb/mediatek,mtu3.txt b/dts/Bindings/usb/mediatek,mtu3.txt
deleted file mode 100644
index a82ca438ae..0000000000
--- a/dts/Bindings/usb/mediatek,mtu3.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-The device node for Mediatek USB3.0 DRD controller
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3",
-	soc-model is the name of SoC, such as mt8173, mt2712 etc,
-	when using "mediatek,mtu3" compatible string, you need SoC specific
-	ones in addition, one of:
-	- "mediatek,mt8173-mtu3"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for device IP and "ippc" for IP port control
- - interrupts : interrupt used by the device IP
- - power-domains : a phandle to USB power domain node to control USB's
-	mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
- - clocks : a list of phandle + clock-specifier pairs, one for each
-	entry in clock-names
- - clock-names : must contain "sys_ck" for clock of controller,
-	the following clocks are optional:
-	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.yaml in the current directory
- - dr_mode : should be one of "host", "peripheral" or "otg",
-	refer to usb/generic.txt
-
-Optional properties:
- - #address-cells, #size-cells : should be '2' if the device has sub-nodes
-	with 'reg' property
- - ranges : allows valid 1:1 translation between child's address space and
-	parent's address space
- - extcon : external connector for vbus and idpin changes detection, needed
-	when supports dual-role mode.
-	it's considered valid for compatibility reasons, not allowed for
-	new bindings, and use "usb-role-switch" property instead.
- - vbus-supply : reference to the VBUS regulator, needed when supports
-	dual-role mode.
-	it's considered valid for compatibility reasons, not allowed for
-	new bindings, and put into a usb-connector node.
-	see connector/usb-connector.yaml.
- - pinctrl-names : a pinctrl state named "default" is optional, and need be
-	defined if auto drd switch is enabled, that means the property dr_mode
-	is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
-	is not set.
- - pinctrl-0 : pin control group
-	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
- - maximum-speed : valid arguments are "super-speed", "high-speed" and
-	"full-speed"; refer to usb/generic.txt
- - usb-role-switch : use USB Role Switch to support dual-role switch, but
-	not extcon; see usb/generic.txt.
- - enable-manual-drd : supports manual dual-role switch via debugfs; usually
-	used when receptacle is TYPE-A and also wants to support dual-role
-	mode.
- - wakeup-source: enable USB remote wakeup of host mode.
- - mediatek,syscon-wakeup : phandle to syscon used to access the register
-	of the USB wakeup glue layer between SSUSB and SPM; it depends on
-	"wakeup-source", and has two arguments:
-	- the first one : register base address of the glue layer in syscon;
-	- the second one : hardware version of the glue layer
-		- 1 : used by mt8173 etc
-		- 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-	bit1 for u3port1, ... etc;
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Sub-nodes:
-The xhci should be added as subnode to mtu3 as shown in the following example
-if host mode is enabled. The DT binding details of xhci can be found in:
-Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
-
-The port would be added as subnode if use "usb-role-switch" property.
-	see graph.txt
-
-Example:
-ssusb: usb@11271000 {
-	compatible = "mediatek,mt8173-mtu3";
-	reg = <0 0x11271000 0 0x3000>,
-	      <0 0x11280700 0 0x0100>;
-	reg-names = "mac", "ippc";
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
-	phys = <&phy_port0 PHY_TYPE_USB3>,
-	       <&phy_port1 PHY_TYPE_USB2>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
-		 <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck";
-	vusb33-supply = <&mt6397_vusb_reg>;
-	vbus-supply = <&usb_p0_vbus>;
-	extcon = <&extcon_usb>;
-	dr_mode = "otg";
-	wakeup-source;
-	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	usb_host: xhci@11270000 {
-		compatible = "mediatek,mt8173-xhci";
-		reg = <0 0x11270000 0 0x1000>;
-		reg-names = "mac";
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
-		clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
-		clock-names = "sys_ck", "ref_ck";
-		vusb33-supply = <&mt6397_vusb_reg>;
-	};
-};
diff --git a/dts/Bindings/usb/mediatek,mtu3.yaml b/dts/Bindings/usb/mediatek,mtu3.yaml
new file mode 100644
index 0000000000..f5c04b9d2d
--- /dev/null
+++ b/dts/Bindings/usb/mediatek,mtu3.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 DRD Controller Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: "usb-drd.yaml"
+
+description: |
+  The DRD controller has a glue layer IPPC (IP Port Control), and its host is
+  based on xHCI.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2712-mtu3
+          - mediatek,mt8173-mtu3
+          - mediatek,mt8183-mtu3
+      - const: mediatek,mtu3
+
+  reg:
+    items:
+      - description: the registers of device MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    items:
+      - const: mac
+      - const: ippc
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, others are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+
+  phys:
+    description:
+      List of all the USB PHYs used, it's better to keep the sequence
+      as the hardware layout.
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY    # the following for backward compatible
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    deprecated: true
+    description: |
+      Regulator of USB VBUS5v, needed when supports dual-role mode.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and put into a usb-connector node.
+
+  dr_mode:
+    enum: [host, peripheral, otg]
+    default: otg
+
+  maximum-speed:
+    enum: [super-speed-plus, super-speed, high-speed, full-speed]
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  extcon:
+    deprecated: true
+    description: |
+      Phandle to the extcon device detecting the IDDIG/VBUS state, neede
+      when supports dual-role mode.
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and use "usb-role-switch" property instead.
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch.
+    type: boolean
+
+  connector:
+    $ref: /connector/usb-connector.yaml#
+    description:
+      Connector for dual role switch, especially for "gpio-usb-b-connector"
+    type: object
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used. See graph.txt
+    type: object
+
+  enable-manual-drd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      supports manual dual-role switch via debugfs; usually used when
+      receptacle is TYPE-A and also wants to support dual-role mode.
+    type: boolean
+
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description:
+            The third cell represents the hardware version of the glue layer,
+            1 is used by mt8173 etc, 2 is used by mt2712 etc
+          enum: [1, 2]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+# Required child node when support dual-role
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    type: object
+    $ref: /usb/mediatek,mtk-xhci.yaml#
+    description:
+      The xhci should be added as subnode to mtu3 as shown in the following
+      example if the host mode is enabled.
+
+dependencies:
+  connector: [ 'usb-role-switch' ]
+  port: [ 'usb-role-switch' ]
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Dual role switch by extcon
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p0_vbus>;
+        extcon = <&extcon_usb>;
+        dr_mode = "otg";
+        wakeup-source;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        xhci: usb@11270000 {
+            compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+            reg = <0x11270000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+            clock-names = "sys_ck", "ref_ck";
+            vusb33-supply = <&mt6397_vusb_reg>;
+        };
+    };
+
+  # Enable/disable device by an input gpio for VBUS pin
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    usb@112c1000 {
+        compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+        reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        dr_mode = "peripheral";
+        usb-role-switch;
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            vbus-gpios = <&pio 13 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+  # Dual role switch with type-c
+  - |
+    usb@11201000 {
+        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+        reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port0 PHY_TYPE_USB2>;
+        clocks = <&clk26m>;
+        clock-names = "sys_ck";
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        dr_mode = "otg";
+        usb-role-switch;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        host: usb@11200000 {
+            compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci";
+            reg = <0x11200000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&clk26m>;
+            clock-names = "sys_ck";
+        };
+
+        port {
+            usb_role_sw: endpoint {
+                remote-endpoint = <&hs_ep>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/usb/mediatek,musb.txt b/dts/Bindings/usb/mediatek,musb.txt
deleted file mode 100644
index 5eedb02965..0000000000
--- a/dts/Bindings/usb/mediatek,musb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-MediaTek musb DRD/OTG controller
--------------------------------------------
-
-Required properties:
- - compatible      : should be one of:
-                     "mediatek,mt2701-musb"
-                     ...
-                     followed by "mediatek,mtk-musb"
- - reg             : specifies physical base address and size of
-                     the registers
- - interrupts      : interrupt used by musb controller
- - interrupt-names : must be "mc"
- - phys            : PHY specifier for the OTG phy
- - dr_mode         : should be one of "host", "peripheral" or "otg",
-                     refer to usb/generic.txt
- - clocks          : a list of phandle + clock-specifier pairs, one for
-                     each entry in clock-names
- - clock-names     : must contain "main", "mcu", "univpll"
-                     for clocks of controller
-
-Optional properties:
- - power-domains   : a phandle to USB power domain node to control USB's
-                     MTCMOS
-
-Required child nodes:
- usb connector node as defined in bindings/connector/usb-connector.yaml
-Optional properties:
- - id-gpios        : input GPIO for USB ID pin.
- - vbus-gpios      : input GPIO for USB VBUS pin.
- - vbus-supply     : reference to the VBUS regulator, needed when supports
-                     dual-role mode
- - usb-role-switch : use USB Role Switch to support dual-role switch, see
-                     usb/generic.txt.
-
-Example:
-
-usb2: usb@11200000 {
-	compatible = "mediatek,mt2701-musb",
-		     "mediatek,mtk-musb";
-	reg = <0 0x11200000 0 0x1000>;
-	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-names = "mc";
-	phys = <&u2port2 PHY_TYPE_USB2>;
-	dr_mode = "otg";
-	clocks = <&pericfg CLK_PERI_USB0>,
-		 <&pericfg CLK_PERI_USB0_MCU>,
-		 <&pericfg CLK_PERI_USB_SLV>;
-	clock-names = "main","mcu","univpll";
-	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-	usb-role-switch;
-	connector{
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
-		vbus-supply = <&usb_vbus>;
-	};
-};
diff --git a/dts/Bindings/usb/mediatek,musb.yaml b/dts/Bindings/usb/mediatek,musb.yaml
new file mode 100644
index 0000000000..84ddacfdbe
--- /dev/null
+++ b/dts/Bindings/usb/mediatek,musb.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings
+
+maintainers:
+  - Min Guo <min.guo@mediatek.com>
+
+properties:
+  $nodename:
+    pattern: '^usb@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8516-musb
+          - mediatek,mt2701-musb
+      - const: mediatek,mtk-musb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  clocks:
+    items:
+      - description: The main/core clock
+      - description: The system bus clock
+      - description: The 48Mhz clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mcu
+      - const: univpll
+
+  phys:
+    maxItems: 1
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch. See usb/generic.txt
+    type: boolean
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+      - peripheral
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  connector:
+    $ref: /connector/usb-connector.yaml#
+    description: Connector for dual role switch
+    type: object
+
+dependencies:
+  usb-role-switch: [ 'connector' ]
+  connector: [ 'usb-role-switch' ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - phys
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    usb@11200000 {
+        compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb";
+        reg = <0x11200000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "mc";
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        dr_mode = "otg";
+        clocks = <&pericfg CLK_PERI_USB0>,
+                 <&pericfg CLK_PERI_USB0_MCU>,
+                 <&pericfg CLK_PERI_USB_SLV>;
+        clock-names = "main","mcu","univpll";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+        usb-role-switch;
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_vbus>;
+        };
+    };
+...
diff --git a/dts/Bindings/usb/omap-usb.txt b/dts/Bindings/usb/omap-usb.txt
index 38d9bb8507..f0dbc5ae45 100644
--- a/dts/Bindings/usb/omap-usb.txt
+++ b/dts/Bindings/usb/omap-usb.txt
@@ -65,7 +65,7 @@ Sub-nodes:
 The dwc3 core should be added as subnode to omap dwc3 glue.
 - dwc3 :
    The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
 
 omap_dwc3 {
 	compatible = "ti,dwc3";
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml
index 2cf525d21e..c3cbd1fa99 100644
--- a/dts/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/Bindings/usb/qcom,dwc3.yaml
@@ -17,6 +17,10 @@ properties:
           - qcom,msm8998-dwc3
           - qcom,sc7180-dwc3
           - qcom,sdm845-dwc3
+          - qcom,sdx55-dwc3
+          - qcom,sm8150-dwc3
+          - qcom,sm8250-dwc3
+          - qcom,sm8350-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -103,11 +107,8 @@ properties:
 # Required child node:
 
 patternProperties:
-  "^dwc3@[0-9a-f]+$":
-    type: object
-    description:
-      A child node must exist to represent the core DWC3 IP block
-      The content of the node is defined in dwc3.txt.
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
 
 required:
   - compatible
@@ -162,7 +163,7 @@ examples:
 
             resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-            dwc3@a600000 {
+            usb@a600000 {
                 compatible = "snps,dwc3";
                 reg = <0 0x0a600000 0 0xcd00>;
                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/usb/renesas,usb-xhci.yaml b/dts/Bindings/usb/renesas,usb-xhci.yaml
index 22603256dd..4c5efaf023 100644
--- a/dts/Bindings/usb/renesas,usb-xhci.yaml
+++ b/dts/Bindings/usb/renesas,usb-xhci.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: "usb-hcd.yaml"
+  - $ref: "usb-xhci.yaml"
 
 properties:
   compatible:
@@ -68,7 +68,7 @@ required:
   - power-domains
   - resets
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/usb/renesas,usb3-peri.yaml b/dts/Bindings/usb/renesas,usb3-peri.yaml
index 929a3f413b..9fcf54b10b 100644
--- a/dts/Bindings/usb/renesas,usb3-peri.yaml
+++ b/dts/Bindings/usb/renesas,usb3-peri.yaml
@@ -54,18 +54,19 @@ properties:
     description: phandle of a companion.
 
   ports:
+    $ref: /schemas/graph.yaml#/properties/ports
     description: |
       any connector to the data bus of this controller should be modelled
       using the OF graph bindings specified, if the "usb-role-switch"
       property is used.
-    type: object
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: High Speed (HS) data bus.
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Super Speed (SS) data bus.
 
     required:
diff --git a/dts/Bindings/usb/renesas,usbhs.yaml b/dts/Bindings/usb/renesas,usbhs.yaml
index 54c361d4a7..e67223d90b 100644
--- a/dts/Bindings/usb/renesas,usbhs.yaml
+++ b/dts/Bindings/usb/renesas,usbhs.yaml
@@ -68,6 +68,7 @@ properties:
       Integer to use BUSWAIT register.
 
   renesas,enable-gpio:
+    maxItems: 1
     description: |
       gpio specifier to check GPIO determining if USB function should be
       enabled.
diff --git a/dts/Bindings/usb/rockchip,dwc3.txt b/dts/Bindings/usb/rockchip,dwc3.txt
deleted file mode 100644
index 9452049323..0000000000
--- a/dts/Bindings/usb/rockchip,dwc3.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Rockchip SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
-- clocks:	A list of phandle + clock-specifier pairs for the
-		clocks listed in clock-names
-- clock-names:	Should contain the following:
-  "ref_clk"	Controller reference clk, have to be 24 MHz
-  "suspend_clk"	Controller suspend clk, have to be 24 MHz or 32 KHz
-  "bus_clk"	Master/Core clock, have to be >= 62.5 MHz for SS
-		operation and >= 30MHz for HS operation
-  "grf_clk"	Controller grf clk
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
-Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
-
-Example device nodes:
-
-	usbdrd3_0: usb@fe800000 {
-		compatible = "rockchip,rk3399-dwc3";
-		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		usbdrd_dwc3_0: dwc3@fe800000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe800000 0x0 0x100000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "otg";
-		};
-	};
-
-	usbdrd3_1: usb@fe900000 {
-		compatible = "rockchip,rk3399-dwc3";
-		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		usbdrd_dwc3_1: dwc3@fe900000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe900000 0x0 0x100000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "otg";
-		};
-	};
diff --git a/dts/Bindings/usb/rockchip,dwc3.yaml b/dts/Bindings/usb/rockchip,dwc3.yaml
new file mode 100644
index 0000000000..04077f2d7f
--- /dev/null
+++ b/dts/Bindings/usb/rockchip,dwc3.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The common content of the node is defined in snps,dwc3.yaml.
+
+  Phy documentation is provided in the following places.
+
+  USB2.0 PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+
+  Type-C PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3399-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3399-dwc3
+      - const: snps,dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description:
+          Controller reference clock, must to be 24 MHz
+      - description:
+          Controller suspend clock, must to be 24 MHz or 32 KHz
+      - description:
+          Master/Core clock, must to be >= 62.5 MHz for SS
+          operation and >= 30MHz for HS operation
+      - description:
+          Controller grf clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: ref_clk
+      - const: suspend_clk
+      - const: bus_clk
+      - const: grf_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: usb3-otg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbdrd3_0: usb@fe800000 {
+        compatible = "rockchip,rk3399-dwc3", "snps,dwc3";
+        reg = <0x0 0xfe800000 0x0 0x100000>;
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+                 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+        clock-names = "ref_clk", "suspend_clk",
+                      "bus_clk", "grf_clk";
+        dr_mode = "otg";
+      };
+    };
diff --git a/dts/Bindings/usb/snps,dwc3.yaml b/dts/Bindings/usb/snps,dwc3.yaml
new file mode 100644
index 0000000000..2247da77ea
--- /dev/null
+++ b/dts/Bindings/usb/snps,dwc3.yaml
@@ -0,0 +1,332 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare USB3 Controller
+
+maintainers:
+  - Felipe Balbi <balbi@kernel.org>
+
+description:
+  This is usually a subnode to DWC3 glue to which it is connected, but can also
+  be presented as a standalone DT node with an optional vendor-specific
+  compatible string.
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - if:
+      properties:
+        dr_mode:
+          const: peripheral
+
+      required:
+        - dr_mode
+    then:
+      $ref: usb.yaml#
+    else:
+      $ref: usb-xhci.yaml#
+
+properties:
+  compatible:
+    contains:
+      oneOf:
+        - const: snps,dwc3
+        - const: synopsys,dwc3
+          deprecated: true
+
+  interrupts:
+    description:
+      It's either a single common DWC3 interrupt (dwc_usb3) or individual
+      interrupts for the host, gadget and DRD modes.
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
+    oneOf:
+      - const: dwc_usb3
+      - items:
+          enum: [host, peripheral, otg]
+
+  clocks:
+    description:
+      In general the core supports three types of clocks. bus_early is a
+      SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
+      PHY is suspended. suspend clocks a small part of the USB3 core when
+      SS PHY in P3. But particular cases may differ from that having less
+      or more clock sources with another names.
+
+  clock-names:
+    contains:
+      anyOf:
+        - enum: [bus_early, ref, suspend]
+        - true
+
+  usb-phy:
+    minItems: 1
+    items:
+      - description: USB2/HS PHY
+      - description: USB3/SS PHY
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB2/HS PHY
+      - description: USB3/SS PHY
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-phy
+      - const: usb3-phy
+
+  resets:
+    minItems: 1
+
+  snps,usb2-lpm-disable:
+    description: Indicate if we don't want to enable USB2 HW LPM
+    type: boolean
+
+  snps,usb3_lpm_capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  snps,dis-start-transfer-quirk:
+    description:
+      When set, disable isoc START TRANSFER command failure SW work-around
+      for DWC_usb31 version 1.70a-ea06 and prior.
+    type: boolean
+
+  snps,disable_scramble_quirk:
+    description:
+      True when SW should disable data scrambling. Only really useful for FPGA
+      builds.
+    type: boolean
+
+  snps,has-lpm-erratum:
+    description: True when DWC3 was configured with LPM Erratum enabled
+    type: boolean
+
+  snps,lpm-nyet-threshold:
+    description: LPM NYET threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,u2exit_lfps_quirk:
+    description: Set if we want to enable u2exit lfps quirk
+    type: boolean
+
+  snps,u2ss_inp3_quirk:
+    description: Set if we enable P3 OK for U2/SS Inactive quirk
+    type: boolean
+
+  snps,req_p1p2p3_quirk:
+    description:
+      When set, the core will always request for P1/P2/P3 transition sequence.
+    type: boolean
+
+  snps,del_p1p2p3_quirk:
+    description:
+      When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
+      occur.
+    type: boolean
+
+  snps,del_phy_power_chg_quirk:
+    description: When set core will delay PHY power change from P0 to P1/P2/P3.
+    type: boolean
+
+  snps,lfps_filter_quirk:
+    description: When set core will filter LFPS reception.
+    type: boolean
+
+  snps,rx_detect_poll_quirk:
+    description:
+      when set core will disable a 400us delay to start Polling LFPS after
+      RX.Detect.
+    type: boolean
+
+  snps,tx_de_emphasis_quirk:
+    description: When set core will set Tx de-emphasis value
+    type: boolean
+
+  snps,tx_de_emphasis:
+    description:
+      The value driven to the PHY is controlled by the LTSSM during USB3
+      Compliance mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum:
+      - 0 # -6dB de-emphasis
+      - 1 # -3.5dB de-emphasis
+      - 2 # No de-emphasis
+
+  snps,dis_u3_susphy_quirk:
+    description: When set core will disable USB3 suspend phy
+    type: boolean
+
+  snps,dis_u2_susphy_quirk:
+    description: When set core will disable USB2 suspend phy
+    type: boolean
+
+  snps,dis_enblslpm_quirk:
+    description:
+      When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
+      to the PHY.
+    type: boolean
+
+  snps,dis-u1-entry-quirk:
+    description: Set if link entering into U1 needs to be disabled
+    type: boolean
+
+  snps,dis-u2-entry-quirk:
+    description: Set if link entering into U2 needs to be disabled
+    type: boolean
+
+  snps,dis_rxdet_inp3_quirk:
+    description:
+      When set core will disable receiver detection in PHY P3 power state.
+    type: boolean
+
+  snps,dis-u2-freeclk-exists-quirk:
+    description:
+      When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
+      PHY doesn't provide a free-running PHY clock.
+    type: boolean
+
+  snps,dis-del-phy-power-chg-quirk:
+    description:
+      When set core will change PHY power from P0 to P1/P2/P3 without delay.
+    type: boolean
+
+  snps,dis-tx-ipgap-linecheck-quirk:
+    description: When set, disable u2mac linestate check during HS transmit
+    type: boolean
+
+  snps,parkmode-disable-ss-quirk:
+    description:
+      When set, all SuperSpeed bus instances in park mode are disabled.
+    type: boolean
+
+  snps,dis_metastability_quirk:
+    description:
+      When set, disable metastability workaround. CAUTION! Use only if you are
+      absolutely sure of it.
+    type: boolean
+
+  snps,dis-split-quirk:
+    description:
+      When set, change the way URBs are handled by the driver. Needed to
+      avoid -EPROTO errors with usbhid on some devices (Hikey 970).
+    type: boolean
+
+  snps,is-utmi-l1-suspend:
+    description:
+      True when DWC3 asserts output signal utmi_l1_suspend_n, false when
+      asserts utmi_sleep_n.
+    type: boolean
+
+  snps,hird-threshold:
+    description: HIRD threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,hsphy_interface:
+    description:
+      High-Speed PHY interface selection between UTMI+ and ULPI when the
+      DWC_USB3_HSPHY_INTERFACE has value 3.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [utmi, ulpi]
+
+  snps,quirk-frame-length-adjustment:
+    description:
+      Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
+      length adjustment when the fladj_30mhz_sdbnd signal is invalid or
+      incorrect.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x3f
+
+  snps,rx-thr-num-pkt-prd:
+    description:
+      Periodic ESS RX packet threshold count (host mode only). Set this and
+      snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,rx-max-burst-prd:
+    description:
+      Max periodic ESS RX burst size (host mode only). Set this and
+      snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-thr-num-pkt-prd:
+    description:
+      Periodic ESS TX packet threshold count (host mode only). Set this and
+      snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-max-burst-prd:
+    description:
+      Max periodic ESS TX burst size (host mode only). Set this and
+      snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  tx-fifo-resize:
+    description: Determines if the FIFO *has* to be reallocated
+    deprecated: true
+    type: boolean
+
+  snps,incr-burst-type-adjustment:
+    description:
+      Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
+      burst type enable and INCRx type. A single value means INCRX burst mode
+      enabled. If more than one value specified, undefined length INCR burst
+      type will be enabled with burst lengths utilized up to the maximum
+      of the values passed in this property.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    uniqueItems: true
+    items:
+      enum: [1, 4, 8, 16, 32, 64, 128, 256]
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@4a030000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a030000 0xcfff>;
+      interrupts = <0 92 4>;
+      usb-phy = <&usb2_phy>, <&usb3_phy>;
+      snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+    };
+  - |
+    usb@4a000000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a000000 0xcfff>;
+      interrupts = <0 92 4>;
+      clocks = <&clk 1>, <&clk 2>, <&clk 3>;
+      clock-names = "bus_early", "ref", "suspend";
+      phys = <&usb2_phy>, <&usb3_phy>;
+      phy-names = "usb2-phy", "usb3-phy";
+      snps,dis_u2_susphy_quirk;
+      snps,dis_enblslpm_quirk;
+    };
+...
diff --git a/dts/Bindings/usb/ti,hd3ss3220.yaml b/dts/Bindings/usb/ti,hd3ss3220.yaml
index 52ceb07294..b86bf6bc9c 100644
--- a/dts/Bindings/usb/ti,hd3ss3220.yaml
+++ b/dts/Bindings/usb/ti,hd3ss3220.yaml
@@ -26,17 +26,17 @@ properties:
     maxItems: 1
 
   ports:
+    $ref: /schemas/graph.yaml#/properties/ports
     description: OF graph bindings (specified in bindings/graph.txt) that model
       SS data bus to the SS capable connector.
-    type: object
+
     properties:
       port@0:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Super Speed (SS) MUX inputs connected to SS capable connector.
-        $ref: /connector/usb-connector.yaml#/properties/ports/properties/port@1
 
       port@1:
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
         description: Output of 2:1 MUX connected to Super Speed (SS) data bus.
 
     required:
diff --git a/dts/Bindings/usb/ti,j721e-usb.yaml b/dts/Bindings/usb/ti,j721e-usb.yaml
index c80a835719..7ec87a783c 100644
--- a/dts/Bindings/usb/ti,j721e-usb.yaml
+++ b/dts/Bindings/usb/ti,j721e-usb.yaml
@@ -19,7 +19,7 @@ properties:
           - const: ti,am64-usb
 
   reg:
-    description: module registers
+    maxItems: 1
 
   ranges: true
 
@@ -28,6 +28,7 @@ properties:
       PM domain provider node and an args specifier containing
       the USB device id value. See,
       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+    maxItems: 1
 
   clocks:
     description: Clock phandles to usb2_refclk and lpm_clk
diff --git a/dts/Bindings/usb/ti,keystone-dwc3.yaml b/dts/Bindings/usb/ti,keystone-dwc3.yaml
index c1b19fc5d0..9a068d3bc7 100644
--- a/dts/Bindings/usb/ti,keystone-dwc3.yaml
+++ b/dts/Bindings/usb/ti,keystone-dwc3.yaml
@@ -43,12 +43,14 @@ properties:
     maxItems: 2
 
   power-domains:
+    maxItems: 1
     description: Should contain a phandle to a PM domain provider node
       and an args specifier containing the USB device id
       value. This property is as per the binding,
       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 
   phys:
+    maxItems: 1
     description:
       PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
       to be turned on before the controller.
@@ -64,9 +66,7 @@ properties:
 
 patternProperties:
   "usb@[a-f0-9]+$":
-    type: object
-    description: This is the node representing the DWC3 controller instance
-      Documentation/devicetree/bindings/usb/dwc3.txt
+    $ref: snps,dwc3.yaml#
 
 required:
   - compatible
diff --git a/dts/Bindings/usb/usb-device.txt b/dts/Bindings/usb/usb-device.txt
deleted file mode 100644
index 036be172b1..0000000000
--- a/dts/Bindings/usb/usb-device.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Generic USB Device Properties
-
-Usually, we only use device tree for hard wired USB device.
-The reference binding doc is from:
-http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
-
-Four types of device-tree nodes are defined: "host-controller nodes"
-representing USB host controllers, "device nodes" representing USB devices,
-"interface nodes" representing USB interfaces and "combined nodes"
-representing simple USB devices.
-
-A combined node shall be used instead of a device node and an interface node
-for devices of class 0 or 9 (hub) with a single configuration and a single
-interface.
-
-A "hub node" is a combined node or an interface node that represents a USB
-hub.
-
-
-Required properties for device nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
-  The textual representation of VID and PID shall be in lower case hexadecimal
-  with leading zeroes suppressed. The other compatible strings from the above
-  standard binding could also be used, but a device adhering to this binding
-  may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
-  this device is attached. The range is 1-255.
-
-
-Required properties for device nodes with interface nodes:
-- #address-cells: shall be 2
-- #size-cells: shall be 0
-
-
-Required properties for interface nodes:
-- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
-  the product id, CN is the configuration value and IN is the interface
-  number. The textual representation of VID, PID, CN and IN shall be in lower
-  case hexadecimal with leading zeroes suppressed. The other compatible
-  strings from the above standard binding could also be used, but a device
-  adhering to this binding may leave out all except for
-  "usbifVID,PID.configCN.IN".
-- reg: the interface number and configuration value
-
-The configuration component is not included in the textual representation of
-an interface-node unit address for configuration 1.
-
-
-Required properties for combined nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
-  The textual representation of VID and PID shall be in lower case hexadecimal
-  with leading zeroes suppressed. The other compatible strings from the above
-  standard binding could also be used, but a device adhering to this binding
-  may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
-  this device is attached. The range is 1-255.
-
-
-Required properties for hub nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Required properties for host-controller nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Example:
-
-&usb1 {	/* host controller */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {		/* hub connected to port 1 */
-		compatible = "usb5e3,608";
-		reg = <1>;
-	};
-
-	device@2 {	/* device connected to port 2 */
-		compatible = "usb123,4567";
-		reg = <2>;
-	};
-
-	device@3 { 	/* device connected to port 3 */
-		compatible = "usb123,abcd";
-		reg = <3>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interface@0 {	/* interface 0 of configuration 1 */
-			compatible = "usbif123,abcd.config1.0";
-			reg = <0 1>;
-		};
-
-		interface@0,2 {	/* interface 0 of configuration 2 */
-			compatible = "usbif123,abcd.config2.0";
-			reg = <0 2>;
-		};
-	};
-};
diff --git a/dts/Bindings/usb/usb-device.yaml b/dts/Bindings/usb/usb-device.yaml
new file mode 100644
index 0000000000..d4c99809ee
--- /dev/null
+++ b/dts/Bindings/usb/usb-device.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the Generic USB Device
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |
+  Usually, we only use device tree for hard wired USB device.
+  The reference binding doc is from:
+  http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
+
+  Four types of device-tree nodes are defined: "host-controller nodes"
+  representing USB host controllers, "device nodes" representing USB devices,
+  "interface nodes" representing USB interfaces and "combined nodes"
+  representing simple USB devices.
+
+  A combined node shall be used instead of a device node and an interface node
+  for devices of class 0 or 9 (hub) with a single configuration and a single
+  interface.
+
+  A "hub node" is a combined node or an interface node that represents a USB
+  hub.
+
+properties:
+  compatible:
+    pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
+    description: Device nodes or combined nodes.
+      "usbVID,PID", where VID is the vendor id and PID the product id.
+      The textual representation of VID and PID shall be in lower case
+      hexadecimal with leading zeroes suppressed. The other compatible
+      strings from the above standard binding could also be used,
+      but a device adhering to this binding may leave out all except
+      for "usbVID,PID".
+
+  reg:
+    description: the number of the USB hub port or the USB host-controller
+      port to which this device is attached. The range is 1-255.
+    maxItems: 1
+
+  "#address-cells":
+    description: should be 1 for hub nodes with device nodes,
+      should be 2 for device nodes with interface nodes.
+    enum: [1, 2]
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$":
+    type: object
+    description: USB interface nodes.
+      The configuration component is not included in the textual
+      representation of an interface-node unit address for configuration 1.
+
+    properties:
+      compatible:
+        pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$"
+        description: Interface nodes.
+          "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+          the product id, CN is the configuration value and IN is the interface
+          number. The textual representation of VID, PID, CN and IN shall be
+          in lower case hexadecimal with leading zeroes suppressed.
+          The other compatible strings from the above standard binding could
+          also be used, but a device adhering to this binding may leave out
+          all except for "usbifVID,PID.configCN.IN".
+
+      reg:
+        description: should be 2 cells long, the first cell represents
+          the interface number and the second cell represents the
+          configuration value.
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  #hub connected to port 1
+  #device connected to port 2
+  #device connected to port 3
+  #    interface 0 of configuration 1
+  #    interface 0 of configuration 2
+  - |
+    usb@11270000 {
+        reg = <0x11270000 0x1000>;
+        interrupts = <0x0 0x4e 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+        };
+
+        device@2 {
+            compatible = "usb123,4567";
+            reg = <2>;
+        };
+
+        device@3 {
+            compatible = "usb123,abcd";
+            reg = <3>;
+
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            interface@0 {
+                compatible = "usbif123,abcd.config1.0";
+                reg = <0 1>;
+            };
+
+            interface@0,2 {
+                compatible = "usbif123,abcd.config2.0";
+                reg = <0 2>;
+            };
+        };
+    };
diff --git a/dts/Bindings/usb/usb-drd.yaml b/dts/Bindings/usb/usb-drd.yaml
new file mode 100644
index 0000000000..f229fc8068
--- /dev/null
+++ b/dts/Bindings/usb/usb-drd.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-drd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB OTG Controller Device Tree Bindings
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  otg-rev:
+    description:
+      Tells usb driver the release number of the OTG and EH supplement with
+      which the device and its descriptors are compliant, in binary-coded
+      decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
+      features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
+      0x0200 or above.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0x0100, 0x0120, 0x0130, 0x0200]
+
+  dr_mode:
+    description:
+      Tells Dual-Role USB controllers that we want to work on a particular
+      mode. In case this attribute isn't passed via DT, USB DRD controllers
+      should default to OTG.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+
+  hnp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
+      basic function of real OTG except you want it to be a srp-capable only B
+      device.
+    type: boolean
+
+  srp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG
+      device.
+    type: boolean
+
+  adp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG
+      device.
+    type: boolean
+
+  usb-role-switch:
+    description:
+      Indicates that the device is capable of assigning the USB data role
+      (USB host or USB device) for a given USB connector, such as Type-C,
+      Type-B(micro). See connector/usb-connector.yaml.
+
+  role-switch-default-mode:
+    description:
+      Indicates if usb-role-switch is enabled, the device default operation
+      mode of controller while usb role is USB_ROLE_NONE.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral]
+    default: peripheral
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@4a030000 {
+        compatible = "snps,dwc3";
+        reg = <0x4a030000 0xcfff>;
+        interrupts = <0 92 4>;
+        usb-phy = <&usb2_phy>, <&usb3_phy>;
+        maximum-speed = "super-speed";
+        dr_mode = "otg";
+        phy_type = "utmi_wide";
+        otg-rev = <0x0200>;
+        adp-disable;
+    };
diff --git a/dts/Bindings/usb/usb-hcd.yaml b/dts/Bindings/usb/usb-hcd.yaml
index b545b087b3..56853c17af 100644
--- a/dts/Bindings/usb/usb-hcd.yaml
+++ b/dts/Bindings/usb/usb-hcd.yaml
@@ -9,18 +9,31 @@ title: Generic USB Host Controller Device Tree Bindings
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 
+allOf:
+  - $ref: usb.yaml#
+
 properties:
-  $nodename:
-    pattern: "^usb(@.*)?"
+  companion:
+    description: Phandle of a companion device
+    $ref: /schemas/types.yaml#/definitions/phandle
 
-  phys:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+  tpl-support:
     description:
-      List of all the USB PHYs on this HCD
+      Indicates if the Targeted Peripheral List is supported for given
+      targeted hosts (non-PC hosts).
+    type: boolean
 
-  phy-names:
-    description:
-      Name specifier for the USB PHY
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /usb/usb-device.yaml
 
 additionalProperties: true
 
@@ -29,4 +42,11 @@ examples:
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
         phy-names = "usb";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+        };
     };
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
deleted file mode 100644
index 0c5cff84a9..0000000000
--- a/dts/Bindings/usb/usb-xhci.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-USB xHCI controllers
-
-Required properties:
-  - compatible: should be one or more of
-
-    - "generic-xhci" for generic XHCI device
-    - "marvell,armada3700-xhci" for Armada 37xx SoCs
-    - "marvell,armada-375-xhci" for Armada 375 SoCs
-    - "marvell,armada-380-xhci" for Armada 38x SoCs
-    - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI
-    - "xhci-platform" (deprecated)
-
-    When compatible with the generic version, nodes must list the
-    SoC-specific version corresponding to the platform first
-    followed by the generic version.
-
-  - reg: should contain address and length of the standard XHCI
-    register set for the device.
-  - interrupts: one XHCI interrupt should be described here.
-
-Optional properties:
-  - clocks: reference to the clocks
-  - clock-names: mandatory if there is a second clock, in this case
-    the name must be "core" for the first clock and "reg" for the
-    second one
-  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
-  - usb3-lpm-capable: determines if platform is USB3 LPM capable
-  - quirk-broken-port-ped: set if the controller has broken port disable mechanism
-  - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.yaml in the current directory
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-
-Example:
-	usb@f0931000 {
-		compatible = "generic-xhci";
-		reg = <0xf0931000 0x8c8>;
-		interrupts = <0x0 0x4e 0x0>;
-	};
diff --git a/dts/Bindings/usb/usb-xhci.yaml b/dts/Bindings/usb/usb-xhci.yaml
new file mode 100644
index 0000000000..965f87fef7
--- /dev/null
+++ b/dts/Bindings/usb/usb-xhci.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB xHCI Controller Device Tree Bindings
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: "usb-hcd.yaml#"
+
+properties:
+  usb2-lpm-disable:
+    description: Indicates if we don't want to enable USB2 HW LPM
+    type: boolean
+
+  usb3-lpm-capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  quirk-broken-port-ped:
+    description: Set if the controller has broken port disable mechanism
+    type: boolean
+
+  imod-interval-ns:
+    description: Interrupt moderation interval
+    default: 5000
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@f0930000 {
+      compatible = "generic-xhci";
+      reg = <0xf0930000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+      usb2-lpm-disable;
+      usb3-lpm-capable;
+    };
diff --git a/dts/Bindings/usb/usb.yaml b/dts/Bindings/usb/usb.yaml
new file mode 100644
index 0000000000..78491e66ed
--- /dev/null
+++ b/dts/Bindings/usb/usb.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Controller Device Tree Bindings
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^usb(@.*)?"
+
+  phys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of all the USB PHYs on this HCD
+
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of all the USB PHYs on this HCD to be accepted by the legacy USB
+      Physical Layer subsystem.
+    deprecated: true
+
+  phy_type:
+    description:
+      Tells USB controllers that we want to configure the core to support a
+      UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low
+      pin interface if ULPI is specified, Serial core/PHY interconnect if
+      serial is specified and High-Speed Inter-Chip feature if HSIC is
+      selected. In case this isn't passed via DT, USB controllers should
+      default to HW capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, utmi_wide, ulpi, serial, hsic]
+
+  maximum-speed:
+    description:
+      Tells USB controllers we want to work up to a certain speed. In case this
+      isn't passed via DT, USB controllers should default to their maximum HW
+      capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - low-speed
+      - full-speed
+      - high-speed
+      - super-speed
+      - super-speed-plus
+      - super-speed-plus-gen2x1
+      - super-speed-plus-gen1x2
+      - super-speed-plus-gen2x2
+
+additionalProperties: true
+
+...
diff --git a/dts/Bindings/usb/usbmisc-imx.txt b/dts/Bindings/usb/usbmisc-imx.txt
index b353b98164..b796836d2c 100644
--- a/dts/Bindings/usb/usbmisc-imx.txt
+++ b/dts/Bindings/usb/usbmisc-imx.txt
@@ -1,7 +1,7 @@
 * Freescale i.MX non-core registers
 
 Required properties:
-- #index-cells: Cells used to descibe usb controller index. Should be <1>
+- #index-cells: Cells used to describe usb controller index. Should be <1>
 - compatible: Should be one of below:
 	"fsl,imx6q-usbmisc" for imx6q
 	"fsl,vf610-usbmisc" for Vybrid vf610