diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-08 07:35:17 +0100 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-10 08:48:40 +0100 |
| commit | 6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 (patch) | |
| tree | bcf5e71df4472e374d03cc15ca22b4f841d9c73d /dts/Bindings/video | |
| parent | 8e2fd5380a4fd7cee428513dc8eab068912b49f1 (diff) | |
| download | barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.gz barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.xz | |
dts: update to v4.4-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/video')
60 files changed, 0 insertions, 3141 deletions
diff --git a/dts/Bindings/video/adi,adv7123.txt b/dts/Bindings/video/adi,adv7123.txt deleted file mode 100644 index a6b2b2b8f3..0000000000 --- a/dts/Bindings/video/adi,adv7123.txt +++ /dev/null @@ -1,50 +0,0 @@ -Analog Device ADV7123 Video DAC -------------------------------- - -The ADV7123 is a digital-to-analog converter that outputs VGA signals from a -parallel video input. - -Required properties: - -- compatible: Should be "adi,adv7123" - -Optional properties: - -- psave-gpios: Power save control GPIO - -Required nodes: - -The ADV7123 has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DPI input -- Video port 1 for VGA output - - -Example -------- - - adv7123: encoder@0 { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7123_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - adv7123_out: endpoint@0 { - remote-endpoint = <&vga_connector_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/adi,adv7511.txt b/dts/Bindings/video/adi,adv7511.txt deleted file mode 100644 index 96c25ee015..0000000000 --- a/dts/Bindings/video/adi,adv7511.txt +++ /dev/null @@ -1,88 +0,0 @@ -Analog Device ADV7511(W)/13 HDMI Encoders ------------------------------------------ - -The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters -compatible with HDMI 1.4 and DVI 1.0. They support color space conversion, -S/PDIF, CEC and HDCP. - -Required properties: - -- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513" -- reg: I2C slave address - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB or YUV input -- Video port 1 for the HDMI output - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - reg = <39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/analog-tv-connector.txt b/dts/Bindings/video/analog-tv-connector.txt deleted file mode 100644 index 0c0970c210..0000000000 --- a/dts/Bindings/video/analog-tv-connector.txt +++ /dev/null @@ -1,25 +0,0 @@ -Analog TV Connector -=================== - -Required properties: -- compatible: "composite-video-connector" or "svideo-connector" - -Optional properties: -- label: a symbolic name for the connector - -Required nodes: -- Video port for TV input - -Example -------- - -tv: connector { - compatible = "composite-video-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; -}; diff --git a/dts/Bindings/video/arm,pl11x.txt b/dts/Bindings/video/arm,pl11x.txt deleted file mode 100644 index 3e3039a8a2..0000000000 --- a/dts/Bindings/video/arm,pl11x.txt +++ /dev/null @@ -1,109 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.txt - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/binding/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt; - when it is a TFT panel, the port's endpoint must define the - following property: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/dts/Bindings/video/atmel,lcdc.txt b/dts/Bindings/video/atmel,lcdc.txt deleted file mode 100644 index ecb8da063d..0000000000 --- a/dts/Bindings/video/atmel,lcdc.txt +++ /dev/null @@ -1,89 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , - "atmel,at32ap-lcdc" -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@0x00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - status = "okay"; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@0x00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/dts/Bindings/video/backlight/88pm860x.txt b/dts/Bindings/video/backlight/88pm860x.txt deleted file mode 100644 index 261df27993..0000000000 --- a/dts/Bindings/video/backlight/88pm860x.txt +++ /dev/null @@ -1,15 +0,0 @@ -88pm860x-backlight bindings - -Optional properties: - - marvell,88pm860x-iset: Current supplies on backlight device. - - marvell,88pm860x-pwm: PWM frequency on backlight device. - -Example: - - backlights { - backlight-0 { - marvell,88pm860x-iset = <4>; - marvell,88pm860x-pwm = <3>; - }; - backlight-2 { - }; diff --git a/dts/Bindings/video/backlight/gpio-backlight.txt b/dts/Bindings/video/backlight/gpio-backlight.txt deleted file mode 100644 index 321be66405..0000000000 --- a/dts/Bindings/video/backlight/gpio-backlight.txt +++ /dev/null @@ -1,16 +0,0 @@ -gpio-backlight bindings - -Required properties: - - compatible: "gpio-backlight" - - gpios: describes the gpio that is used for enabling/disabling the backlight. - refer to bindings/gpio/gpio.txt for more details. - -Optional properties: - - default-on: enable the backlight at boot. - -Example: - backlight { - compatible = "gpio-backlight"; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - default-on; - }; diff --git a/dts/Bindings/video/backlight/lp855x.txt b/dts/Bindings/video/backlight/lp855x.txt deleted file mode 100644 index 0a3ecbc3a1..0000000000 --- a/dts/Bindings/video/backlight/lp855x.txt +++ /dev/null @@ -1,70 +0,0 @@ -lp855x bindings - -Required properties: - - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553", - "ti,lp8555", "ti,lp8556", "ti,lp8557" - - reg: I2C slave address (u8) - - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device. - -Optional properties: - - bl-name: Backlight device name (string) - - init-brt: Initial value of backlight brightness (u8) - - pwm-period: PWM period value. Set only PWM input mode used (u32) - - rom-addr: Register address of ROM area to be updated (u8) - - rom-val: Register value to be updated (u8) - - power-supply: Regulator which controls the 3V rail - -Example: - - /* LP8555 */ - backlight@2c { - compatible = "ti,lp8555"; - reg = <0x2c>; - - dev-ctrl = /bits/ 8 <0x00>; - pwm-period = <10000>; - - /* 4V OV, 4 output LED0 string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - - /* Heavy smoothing, 24ms ramp time step */ - rom_15h { - rom-addr = /bits/ 8 <0x15>; - rom-val = /bits/ 8 <0xc7>; - }; - - /* 4 output LED1 string enabled */ - rom_19h { - rom-addr = /bits/ 8 <0x19>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - - /* LP8556 */ - backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - - bl-name = "lcd-bl"; - dev-ctrl = /bits/ 8 <0x85>; - init-brt = /bits/ 8 <0x10>; - }; - - /* LP8557 */ - backlight@2c { - compatible = "ti,lp8557"; - reg = <0x2c>; - power-supply = <&backlight_vdd>; - - dev-ctrl = /bits/ 8 <0x41>; - init-brt = /bits/ 8 <0x0a>; - - /* 4V OV, 4 output LED string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - }; diff --git a/dts/Bindings/video/backlight/max8925-backlight.txt b/dts/Bindings/video/backlight/max8925-backlight.txt deleted file mode 100644 index b4cffdaa41..0000000000 --- a/dts/Bindings/video/backlight/max8925-backlight.txt +++ /dev/null @@ -1,10 +0,0 @@ -88pm860x-backlight bindings - -Optional properties: - - maxim,max8925-dual-string: whether support dual string - -Example: - - backlights { - maxim,max8925-dual-string = <0>; - }; diff --git a/dts/Bindings/video/backlight/pm8941-wled.txt b/dts/Bindings/video/backlight/pm8941-wled.txt deleted file mode 100644 index 424f8444a6..0000000000 --- a/dts/Bindings/video/backlight/pm8941-wled.txt +++ /dev/null @@ -1,40 +0,0 @@ -Binding for Qualcomm PM8941 WLED driver - -Required properties: -- compatible: should be "qcom,pm8941-wled" -- reg: slave address - -Optional properties: -- label: The name of the backlight device -- qcom,cs-out: bool; enable current sink output -- qcom,cabc: bool; enable content adaptive backlight control -- qcom,ext-gen: bool; use externally generated modulator signal to dim -- qcom,current-limit: mA; per-string current limit; value from 0 to 25 - default: 20mA -- qcom,current-boost-limit: mA; boost current limit; one of: - 105, 385, 525, 805, 980, 1260, 1400, 1680 - default: 805mA -- qcom,switching-freq: kHz; switching frequency; one of: - 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, - 1600, 1920, 2400, 3200, 4800, 9600, - default: 1600kHz -- qcom,ovp: V; Over-voltage protection limit; one of: - 27, 29, 32, 35 - default: 29V -- qcom,num-strings: #; number of led strings attached; value from 1 to 3 - default: 2 - -Example: - -pm8941-wled@d800 { - compatible = "qcom,pm8941-wled"; - reg = <0xd800>; - label = "backlight"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; -}; diff --git a/dts/Bindings/video/backlight/pwm-backlight.txt b/dts/Bindings/video/backlight/pwm-backlight.txt deleted file mode 100644 index 764db86d44..0000000000 --- a/dts/Bindings/video/backlight/pwm-backlight.txt +++ /dev/null @@ -1,35 +0,0 @@ -pwm-backlight bindings - -Required properties: - - compatible: "pwm-backlight" - - pwms: OF device-tree PWM specification (see PWM binding[0]) - - brightness-levels: Array of distinct brightness levels. Typically these - are in the range from 0 to 255, but any range starting at 0 will do. - The actual brightness level (PWM duty cycle) will be interpolated - from these values. 0 means a 0% duty cycle (darkest/off), while the - last value in the array represents a 100% duty cycle (brightest). - - default-brightness-level: the default brightness level (index into the - array defined by the "brightness-levels" property) - - power-supply: regulator for supply voltage - -Optional properties: - - pwm-names: a list of names for the PWM devices specified in the - "pwms" property (see PWM binding[0]) - - enable-gpios: contains a single GPIO specifier for the GPIO which enables - and disables the backlight (see GPIO binding[1]) - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 5000000>; - - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - - power-supply = <&vdd_bl_reg>; - enable-gpios = <&gpio 58 0>; - }; diff --git a/dts/Bindings/video/backlight/sky81452-backlight.txt b/dts/Bindings/video/backlight/sky81452-backlight.txt deleted file mode 100644 index 8bf2940f54..0000000000 --- a/dts/Bindings/video/backlight/sky81452-backlight.txt +++ /dev/null @@ -1,29 +0,0 @@ -SKY81452-backlight bindings - -Required properties: -- compatible : Must be "skyworks,sky81452-backlight" - -Optional properties: -- name : Name of backlight device. Default is 'lcd-backlight'. -- gpios : GPIO to use to EN pin. - See Documentation/devicetree/bindings/gpio/gpio.txt -- led-sources : List of enabled channels from 0 to 5. - See Documentation/devicetree/bindings/leds/common.txt -- skyworks,ignore-pwm : Ignore both PWM input -- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. -- skyworks,phase-shift : Enable phase shift mode -- skyworks,short-detection-threshold-volt - : It should be one of 4, 5, 6 and 7V. -- skyworks,current-limit-mA - : It should be 2300mA or 2750mA. - -Example: - - backlight { - compatible = "skyworks,sky81452-backlight"; - name = "pwm-backlight"; - led-sources = <0 1 2 5>; - skyworks,ignore-pwm; - skyworks,phase-shift; - skyworks,current-limit-mA = <2300>; - }; diff --git a/dts/Bindings/video/backlight/tps65217-backlight.txt b/dts/Bindings/video/backlight/tps65217-backlight.txt deleted file mode 100644 index 5fb9279ac2..0000000000 --- a/dts/Bindings/video/backlight/tps65217-backlight.txt +++ /dev/null @@ -1,27 +0,0 @@ -TPS65217 family of regulators - -The TPS65217 chip contains a boost converter and current sinks which can be -used to drive LEDs for use as backlights. - -Required properties: -- compatible: "ti,tps65217" -- reg: I2C slave address -- backlight: node for specifying WLED1 and WLED2 lines in TPS65217 -- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) -- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 -- default-brightness: valid values: 0-100 - -Each regulator is defined using the standard binding for regulators. - -Example: - - tps: tps@24 { - reg = <0x24>; - compatible = "ti,tps65217"; - backlight { - isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <50>; - }; - }; - diff --git a/dts/Bindings/video/bridge/ps8622.txt b/dts/Bindings/video/bridge/ps8622.txt deleted file mode 100644 index c989c3807f..0000000000 --- a/dts/Bindings/video/bridge/ps8622.txt +++ /dev/null @@ -1,31 +0,0 @@ -ps8622-bridge bindings - -Required properties: - - compatible: "parade,ps8622" or "parade,ps8625" - - reg: first i2c address of the bridge - - sleep-gpios: OF device-tree gpio specification for PD_ pin. - - reset-gpios: OF device-tree gpio specification for RST_ pin. - -Optional properties: - - lane-count: number of DP lanes to use - - use-external-pwm: backlight will be controlled by an external PWM - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@48 { - compatible = "parade,ps8622"; - reg = <0x48>; - sleep-gpios = <&gpc3 6 1 0 0>; - reset-gpios = <&gpc3 1 1 0 0>; - lane-count = <1>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/bridge/ptn3460.txt b/dts/Bindings/video/bridge/ptn3460.txt deleted file mode 100644 index 361971ba10..0000000000 --- a/dts/Bindings/video/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/cirrus,clps711x-fb.txt b/dts/Bindings/video/cirrus,clps711x-fb.txt deleted file mode 100644 index 6fc3c6adee..0000000000 --- a/dts/Bindings/video/cirrus,clps711x-fb.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Currus Logic CLPS711X Framebuffer - -Required properties: -- compatible: Shall contain "cirrus,clps711x-fb". -- reg : Physical base address and length of the controller's registers + - location and size of the framebuffer memory. -- clocks : phandle + clock specifier pair of the FB reference clock. -- display : phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt. - Additionally, the display node has to define properties: - - bits-per-pixel: Bits per pixel. - - ac-prescale : LCD AC bias frequency. This frequency is the required - AC bias frequency for a given manufacturer's LCD plate. - - cmap-invert : Invert the color levels (Optional). - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - fb: fb@800002c0 { - compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb"; - reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; - clocks = <&clks 2>; - lcd-supply = <®5v0>; - display = <&display>; - }; - - display: display { - model = "320x240x4"; - native-mode = <&timing0>; - bits-per-pixel = <4>; - ac-prescale = <17>; - - display-timings { - timing0: 320x240 { - hactive = <320>; - hback-porch = <0>; - hfront-porch = <0>; - hsync-len = <0>; - vactive = <240>; - vback-porch = <0>; - vfront-porch = <0>; - vsync-len = <0>; - clock-frequency = <6500000>; - }; - }; - }; diff --git a/dts/Bindings/video/display-timing.txt b/dts/Bindings/video/display-timing.txt deleted file mode 100644 index e1d4a0b596..0000000000 --- a/dts/Bindings/video/display-timing.txt +++ /dev/null @@ -1,110 +0,0 @@ -display-timing bindings -======================= - -display-timings node --------------------- - -required properties: - - none - -optional properties: - - native-mode: The native mode for the display, in case multiple modes are - provided. When omitted, assume the first node is the native. - -timing subnode --------------- - -required properties: - - hactive, vactive: display resolution - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: vertical display timing parameters in - lines - - clock-frequency: display clock in Hz - -optional properties: - - hsync-active: hsync pulse is active low/high/ignored - - vsync-active: vsync pulse is active low/high/ignored - - de-active: data-enable pulse is active low/high/ignored - - pixelclk-active: with - - active high = drive pixel data on rising edge/ - sample data on falling edge - - active low = drive pixel data on falling edge/ - sample data on rising edge - - ignored = ignored - - interlaced (bool): boolean to enable interlaced mode - - doublescan (bool): boolean to enable doublescan mode - - doubleclk (bool): boolean to enable doubleclock mode - -All the optional properties that are not bool follow the following logic: - <1>: high active - <0>: low active - omitted: not used on hardware - -There are different ways of describing the capabilities of a display. The -devicetree representation corresponds to the one commonly found in datasheets -for displays. If a display supports multiple signal timings, the native-mode -can be specified. - -The parameters are defined as: - - +----------+-------------------------------------+----------+-------+ - | | ↑ | | | - | | |vback_porch | | | - | | ↓ | | | - +----------#######################################----------+-------+ - | # ↑ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # ↓ # | | - +----------#######################################----------+-------+ - | | ↑ | | | - | | |vfront_porch | | | - | | ↓ | | | - +----------+-------------------------------------+----------+-------+ - | | ↑ | | | - | | |vsync_len | | | - | | ↓ | | | - +----------+-------------------------------------+----------+-------+ - -Example: - - display-timings { - native-mode = <&timing0>; - timing0: 1080p24 { - /* 1920x1080p24 */ - clock-frequency = <52000000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <25>; - hback-porch = <25>; - hsync-len = <25>; - vback-porch = <2>; - vfront-porch = <2>; - vsync-len = <2>; - hsync-active = <1>; - }; - }; - -Every required property also supports the use of ranges, so the commonly used -datasheet description with minimum, typical and maximum values can be used. - -Example: - - timing1: timing { - /* 1920x1080p24 */ - clock-frequency = <148500000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <0 44 60>; - hfront-porch = <80 88 95>; - hback-porch = <100 148 160>; - vfront-porch = <0 4 6>; - vback-porch = <0 36 50>; - vsync-len = <0 5 6>; - }; diff --git a/dts/Bindings/video/dvi-connector.txt b/dts/Bindings/video/dvi-connector.txt deleted file mode 100644 index fc53f7c60b..0000000000 --- a/dts/Bindings/video/dvi-connector.txt +++ /dev/null @@ -1,35 +0,0 @@ -DVI Connector -============== - -Required properties: -- compatible: "dvi-connector" - -Optional properties: -- label: a symbolic name for the connector -- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC -- analog: the connector has DVI analog pins -- digital: the connector has DVI digital pins -- dual-link: the connector has pins for DVI dual-link - -Required nodes: -- Video port for DVI input - -Note: One (or both) of 'analog' or 'digital' must be set. - -Example -------- - -dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; -}; diff --git a/dts/Bindings/video/dw_hdmi-rockchip.txt b/dts/Bindings/video/dw_hdmi-rockchip.txt deleted file mode 100644 index 668091f276..0000000000 --- a/dts/Bindings/video/dw_hdmi-rockchip.txt +++ /dev/null @@ -1,46 +0,0 @@ -Rockchip specific extensions to the Synopsys Designware HDMI -================================ - -Required properties: -- compatible: "rockchip,rk3288-dw-hdmi"; -- reg: Physical base address and length of the controller's registers. -- clocks: phandle to hdmi iahb and isfr clocks. -- clock-names: should be "iahb" "isfr" -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. -- interrupts: HDMI interrupt number -- ports: contain a port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. For - vopb,set the reg = <0> and set the reg = <1> for vopl. -- reg-io-width: the width of the reg:1,4, the value should be 4 on - rk3288 platform - -Optional properties -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" - -Example: -hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; - reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; - status = "disabled"; - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; -}; diff --git a/dts/Bindings/video/exynos-mic.txt b/dts/Bindings/video/exynos-mic.txt deleted file mode 100644 index 0fba2ee644..0000000000 --- a/dts/Bindings/video/exynos-mic.txt +++ /dev/null @@ -1,51 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) - -MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is -not capable to transfer high resoltuion frame data as decon can send. MIC -solves this problem by compressing the frame data by 1/2 before it is -transferred through mipi dsi. The compressed frame data must be uncompressed in -the panel PCB. - -Required properties: -- compatible: value should be "samsung,exynos5433-mic". -- reg: physical base address and length of the MIC registers set and system - register of mic. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". -- samsung,disp-syscon: the reference node for syscon for DISP block. -- ports: contains a port which is connected to decon node and dsi node. - address-cells and size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the - decon node or dsi node. The reg value must be 0 and 1 respectively. - -Example: -SoC specific DT entry: -mic: mic@13930000 { - compatible = "samsung,exynos5433-mic"; - reg = <0x13930000 0x48>; - clocks = <&cmu_disp CLK_PCLK_MIC0>, - <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; - clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; - samsung,disp-syscon = <&syscon_disp>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mic_to_decon: endpoint { - remote-endpoint = <&decon_to_mic>; - }; - }; - - port@1 { - reg = <1>; - mic_to_dsi: endpoint { - remote-endpoint = <&dsi_to_mic>; - }; - }; - }; -}; diff --git a/dts/Bindings/video/exynos5433-decon.txt b/dts/Bindings/video/exynos5433-decon.txt deleted file mode 100644 index 377afbf512..0000000000 --- a/dts/Bindings/video/exynos5433-decon.txt +++ /dev/null @@ -1,65 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos5433-decon"; -- reg: physical base address and length of the DECON registers set. -- interrupts: should contain a list of all DECON IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier format - depends on the interrupt controller used. -- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys" - in the same order as they were listed in the interrupts - property. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "aclk_decon", "aclk_smmu_decon0x", - "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk", - "sclk_decon_eclk" -- ports: contains a port which is connected to mic node. address-cells and - size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the mic - node. The reg value muset be 0. -- i80-if-timings: specify whether the panel which is connected to decon uses - i80 lcd interface or mipi video interface. This node contains - no timing information as that of fimd does. Because there is - no register in decon to specify i80 interface timing value, - it is not needed, but make it remain to use same kind of node - in fimd and exynos7 decon. - -Example: -SoC specific DT entry: -decon: decon@13800000 { - compatible = "samsung,exynos5433-decon"; - reg = <0x13800000 0x2104>; - clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_XIU_DECON0X>, - <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; - clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", - "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; - interrupt-names = "vsync", "lcd_sys"; - interrupts = <0 202 0>, <0 203 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - }; -}; - -Board specific DT entry: -&decon { - i80-if-timings { - }; -}; diff --git a/dts/Bindings/video/exynos7-decon.txt b/dts/Bindings/video/exynos7-decon.txt deleted file mode 100644 index f5f9c8d4a5..0000000000 --- a/dts/Bindings/video/exynos7-decon.txt +++ /dev/null @@ -1,68 +0,0 @@ -Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos7 series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos7-decon"; - -- reg: physical base address and length of the DECON registers set. - -- interrupt-parent: should be the phandle of the decon controller's - parent interrupt controller. - -- interrupts: should contain a list of all DECON IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_decon0", "aclk_decon0", - "decon0_eclk", "decon0_vclk". -- i80-if-timings: timing configuration for lcd i80 interface support. - -Optional Properties: -- samsung,power-domain: a phandle to DECON power domain node. -- display-timings: timing settings for DECON, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. - -[1]: Documentation/devicetree/bindings/video/display-timing.txt - -Example: - -SoC specific DT entry: - - decon@13930000 { - compatible = "samsung,exynos7-decon"; - interrupt-parent = <&combiner>; - reg = <0x13930000 0x1000>; - interrupt-names = "lcd_sys", "vsync", "fifo"; - interrupts = <0 188 0>, <0 189 0>, <0 190 0>; - clocks = <&clock_disp PCLK_DECON_INT>, - <&clock_disp ACLK_DECON_INT>, - <&clock_disp SCLK_DECON_INT_ECLK>, - <&clock_disp SCLK_DECON_INT_EXTCLKPLL>; - clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk", - "decon0_vclk"; - status = "disabled"; - }; - -Board specific DT entry: - - decon@13930000 { - pinctrl-0 = <&lcd_clk &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/dts/Bindings/video/exynos_dp.txt b/dts/Bindings/video/exynos_dp.txt deleted file mode 100644 index 7a3a9cdb86..0000000000 --- a/dts/Bindings/video/exynos_dp.txt +++ /dev/null @@ -1,120 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -interrupt-parent: - phandle to Interrupt combiner node. - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -samsung,color-space: - input video data format. - COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 - -samsung,dynamic-range: - dynamic range for input video data. - VESA = 0, CEA = 1 - -samsung,ycbcr-coeff: - YCbCr co-efficients for input video. - COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 - -samsung,color-depth: - number of bits per colour component. - COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 - -samsung,link-rate: - link rate supported by the panel. - LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A - -samsung,lane-count: - number of lanes supported by the panel. - LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/video/display-timing.txt - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/exynos_dsim.txt b/dts/Bindings/video/exynos_dsim.txt deleted file mode 100644 index 0be0362706..0000000000 --- a/dts/Bindings/video/exynos_dsim.txt +++ /dev/null @@ -1,103 +0,0 @@ -Exynos MIPI DSI Master - -Required properties: - - compatible: value should be one of the following - "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ - "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */ - "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ - "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ - - reg: physical base address and length of the registers set for the device - - interrupts: should contain DSI interrupt - - clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names - - clock-names: should include "bus_clk"and "sclk_mipi" entries - the use of "pll_clk" is deprecated - - phys: list of phy specifiers, must contain an entry for each required - entry in phy-names - - phy-names: should include "dsim" entry - - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) - - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) - - samsung,pll-clock-frequency: specifies frequency of the oscillator clock - - #address-cells, #size-cells: should be set respectively to <1> and <0> - according to DSI host bindings (see MIPI DSI bindings [1]) - -Optional properties: - - power-domains: a phandle to DSIM power domain node - -Child nodes: - Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). - -Video interfaces: - Device node can contain video interface port nodes according to [2]. - The following are properties specific to those nodes: - - port node inbound: - - reg: (required) must be 0. - port node outbound: - - reg: (required) must be 1. - - endpoint node connected from mic node (reg = 0): - - remote-endpoint: specifies the endpoint in mic node. This node is required - for Exynos5433 mipi dsi. So mic can access to panel node - thoughout this dsi node. - endpoint node connected to panel node (reg = 1): - - remote-endpoint: specifies the endpoint in panel node. This node is - required in all kinds of exynos mipi dsi to represent - the connection between mipi dsi and panel. - - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst - mode - - samsung,esc-clock-frequency: specifies DSI frequency in escape mode - -[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - dsi@11C80000 { - compatible = "samsung,exynos4210-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <0 79 0>; - clocks = <&clock 286>, <&clock 143>; - clock-names = "bus_clk", "sclk_mipi"; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - power-domains = <&pd_lcd0>; - #address-cells = <1>; - #size-cells = <0>; - samsung,pll-clock-frequency = <24000000>; - - panel@1 { - reg = <0>; - ... - port { - panel_ep: endpoint { - remote-endpoint = <&dsi_ep>; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - - port@1 { - reg = <1>; - dsi_ep: endpoint { - reg = <0>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - remote-endpoint = <&panel_ep>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/exynos_hdmi.txt b/dts/Bindings/video/exynos_hdmi.txt deleted file mode 100644 index 1fd8cf9cbf..0000000000 --- a/dts/Bindings/video/exynos_hdmi.txt +++ /dev/null @@ -1,43 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be one among the following: - 1) "samsung,exynos5-hdmi" <DEPRECATED> - 2) "samsung,exynos4210-hdmi" - 3) "samsung,exynos4212-hdmi" - 4) "samsung,exynos5420-hdmi" -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) optional flags and pull up/down. -- clocks: list of clock IDs from SoC clock driver. - a) hdmi: Gate of HDMI IP bus clock. - b) sclk_hdmi: Gate of HDMI special clock. - c) sclk_pixel: Pixel special clock, one of the two possible inputs of - HDMI clock mux. - d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of - HDMI clock mux. - e) mout_hdmi: It is required by the driver to switch between the 2 - parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable - after configuration, parent is set to sclk_hdmiphy else - sclk_pixel. -- clock-names: aliases as per driver requirements for above clock IDs: - "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". -- ddc: phandle to the hdmi ddc node -- phy: phandle to the hdmi phy node -- samsung,syscon-phandle: phandle for system controller node for PMU. - -Example: - - hdmi { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 1>; - ddc = <&hdmi_ddc_node>; - phy = <&hdmi_phy_node>; - samsung,syscon-phandle = <&pmu_system_controller>; - }; diff --git a/dts/Bindings/video/exynos_hdmiddc.txt b/dts/Bindings/video/exynos_hdmiddc.txt deleted file mode 100644 index 41eee97156..0000000000 --- a/dts/Bindings/video/exynos_hdmiddc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be one of the following - 1) "samsung,exynos5-hdmiddc" <DEPRECATED> - 2) "samsung,exynos4210-hdmiddc" - -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; diff --git a/dts/Bindings/video/exynos_hdmiphy.txt b/dts/Bindings/video/exynos_hdmiphy.txt deleted file mode 100644 index 162f641f76..0000000000 --- a/dts/Bindings/video/exynos_hdmiphy.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-hdmiphy" <DEPRECATED> - 2) "samsung,exynos4210-hdmiphy". - 3) "samsung,exynos4212-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos4210-hdmiphy"; - reg = <0x38>; - }; diff --git a/dts/Bindings/video/exynos_mixer.txt b/dts/Bindings/video/exynos_mixer.txt deleted file mode 100644 index 3e38128f86..0000000000 --- a/dts/Bindings/video/exynos_mixer.txt +++ /dev/null @@ -1,26 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-mixer" <DEPRECATED> - 2) "samsung,exynos4210-mixer" - 3) "samsung,exynos4212-mixer" - 4) "samsung,exynos5250-mixer" - 5) "samsung,exynos5420-mixer" - -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- clocks: list of clock IDs from SoC clock driver. - a) mixer: Gate of Mixer IP bus clock. - b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of - mixer mux. - c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi. - -Example: - - mixer { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/dts/Bindings/video/fsl,dcu.txt b/dts/Bindings/video/fsl,dcu.txt deleted file mode 100644 index ebf1be9ae3..0000000000 --- a/dts/Bindings/video/fsl,dcu.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device Tree bindings for Freescale DCU DRM Driver - -Required properties: -- compatible: Should be one of - * "fsl,ls1021a-dcu". - * "fsl,vf610-dcu". - -- reg: Address and length of the register set for dcu. -- clocks: From common clock binding: handle to dcu clock. -- clock-names: From common clock binding: Shall be "dcu". -- big-endian Boolean property, LS1021A DCU registers are big-endian. -- fsl,panel: The phandle to panel node. - -Examples: -dcu: dcu@2ce0000 { - compatible = "fsl,ls1021a-dcu"; - reg = <0x0 0x2ce0000 0x0 0x10000>; - clocks = <&platform_clk 0>; - clock-names = "dcu"; - big-endian; - fsl,panel = <&panel>; -}; diff --git a/dts/Bindings/video/fsl,imx-fb.txt b/dts/Bindings/video/fsl,imx-fb.txt deleted file mode 100644 index 8c8c2f4e4c..0000000000 --- a/dts/Bindings/video/fsl,imx-fb.txt +++ /dev/null @@ -1,55 +0,0 @@ -Freescale imx21 Framebuffer - -This framebuffer driver supports devices imx1, imx21, imx25, and imx27. - -Required properties: -- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 -- reg : Should contain 1 register ranges(address and length) -- interrupts : One interrupt of the fb dev - -Required nodes: -- display: Phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt - Additional, the display node has to define properties: - - bits-per-pixel: Bits per pixel - - fsl,pcr: LCDC PCR value - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. -- fsl,dmacr: DMA Control Register value. This is optional. By default, the - register is not modified as recommended by the datasheet. -- fsl,lpccr: Contrast Control Register value. This property provides the - default value for the contrast control register. - If that property is omitted, the register is zeroed. -- fsl,lscr1: LCDC Sharp Configuration Register value. - -Example: - - imxfb: fb@10021000 { - compatible = "fsl,imx21-fb"; - interrupts = <61>; - reg = <0x10021000 0x1000>; - display = <&display0>; - }; - - ... - - display0: display0 { - model = "Primeview-PD050VL1"; - native-mode = <&timing_disp0>; - bits-per-pixel = <16>; - fsl,pcr = <0xf0c88080>; /* non-standard but required */ - display-timings { - timing_disp0: 640x480 { - hactive = <640>; - vactive = <480>; - hback-porch = <112>; - hfront-porch = <36>; - hsync-len = <32>; - vback-porch = <33>; - vfront-porch = <33>; - vsync-len = <2>; - clock-frequency = <25000000>; - }; - }; - }; diff --git a/dts/Bindings/video/hdmi-connector.txt b/dts/Bindings/video/hdmi-connector.txt deleted file mode 100644 index acd5668b1c..0000000000 --- a/dts/Bindings/video/hdmi-connector.txt +++ /dev/null @@ -1,29 +0,0 @@ -HDMI Connector -============== - -Required properties: -- compatible: "hdmi-connector" -- type: the HDMI connector type: "a", "b", "c", "d" or "e" - -Optional properties: -- label: a symbolic name for the connector -- hpd-gpios: HPD GPIO number - -Required nodes: -- Video port for HDMI input - -Example -------- - -hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; -}; diff --git a/dts/Bindings/video/lgphilips,lb035q02.txt b/dts/Bindings/video/lgphilips,lb035q02.txt deleted file mode 100644 index 1a1e653e54..0000000000 --- a/dts/Bindings/video/lgphilips,lb035q02.txt +++ /dev/null @@ -1,33 +0,0 @@ -LG.Philips LB035Q02 Panel -========================= - -Required properties: -- compatible: "lgphilips,lb035q02" -- enable-gpios: panel enable gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "lgphilips,lb035q02"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - enable-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/video/panel-dpi.txt b/dts/Bindings/video/panel-dpi.txt deleted file mode 100644 index a40180b05b..0000000000 --- a/dts/Bindings/video/panel-dpi.txt +++ /dev/null @@ -1,45 +0,0 @@ -Generic MIPI DPI Panel -====================== - -Required properties: -- compatible: "panel-dpi" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: panel enable gpio - -Required nodes: -- "panel-timing" containing video timings - (Documentation/devicetree/bindings/video/display-timing.txt) -- Video port for DPI input - -Example -------- - -lcd0: display@0 { - compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - panel-timing { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; -}; diff --git a/dts/Bindings/video/panel-dsi-cm.txt b/dts/Bindings/video/panel-dsi-cm.txt deleted file mode 100644 index dce48eb9db..0000000000 --- a/dts/Bindings/video/panel-dsi-cm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Generic MIPI DSI Command Mode Panel -=================================== - -Required properties: -- compatible: "panel-dsi-cm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio -- te-gpios: panel TE gpio - -Required nodes: -- Video port for DSI input - -Example -------- - -lcd0: display { - compatible = "tpo,taal", "panel-dsi-cm"; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; -}; diff --git a/dts/Bindings/video/renesas,du.txt b/dts/Bindings/video/renesas,du.txt deleted file mode 100644 index c902323928..0000000000 --- a/dts/Bindings/video/renesas,du.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Renesas R-Car Display Unit (DU) - -Required Properties: - - - compatible: must be one of the following. - - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU - - - reg: A list of base address and length of each memory resource, one for - each entry in the reg-names property. - - reg-names: Name of the memory resources. The DU requires one memory - resource for the DU core (named "du") and one memory resource for each - LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical - index). - - - interrupt-parent: phandle of the parent interrupt controller. - - interrupts: Interrupt specifiers for the DU interrupts. - - - clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. - - clock-names: Name of the clocks. This property is model-dependent. - - R8A7779 uses a single functional clock. The clock doesn't need to be - named. - - R8A7790 and R8A7791 use one functional clock per channel and one clock - per LVDS encoder. The functional clocks must be named "du.x" with "x" - being the channel numerical index. The LVDS clocks must be named - "lvds.x" with "x" being the LVDS encoder numerical index. - - In addition to the functional and encoder clocks, all DU versions also - support externally supplied pixel clocks. Those clocks are optional. - When supplied they must be named "dclkin.x" with "x" being the input - clock numerical index. - -Required nodes: - -The connections to the DU output video ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each DU output. - - Port 0 Port1 Port2 ------------------------------------------------------------------------------ - R8A7779 (H1) DPAD 0 DPAD 1 - - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - R8A7791 (M2) DPAD LVDS 0 - - - -Example: R8A7790 (R-Car H2) DU - - du: du@feb00000 { - compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; - interrupt-parent = <&gic>; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { - }; - }; - port@2 { - reg = <2>; - du_out_lvds1: endpoint { - }; - }; - }; - }; diff --git a/dts/Bindings/video/rockchip-drm.txt b/dts/Bindings/video/rockchip-drm.txt deleted file mode 100644 index 7fff582495..0000000000 --- a/dts/Bindings/video/rockchip-drm.txt +++ /dev/null @@ -1,19 +0,0 @@ -Rockchip DRM master device -================================ - -The Rockchip DRM master device is a virtual device needed to list all -vop devices or other display interface nodes that comprise the -graphics subsystem. - -Required properties: -- compatible: Should be "rockchip,display-subsystem" -- ports: Should contain a list of phandles pointing to display interface port - of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/video/rockchip-vop.txt - -example: - -display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; -}; diff --git a/dts/Bindings/video/rockchip-vop.txt b/dts/Bindings/video/rockchip-vop.txt deleted file mode 100644 index d15351f231..0000000000 --- a/dts/Bindings/video/rockchip-vop.txt +++ /dev/null @@ -1,58 +0,0 @@ -device-tree bindings for rockchip soc display controller (vop) - -VOP (Visual Output Processor) is the Display Controller for the Rockchip -series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3288-vop"; - -- interrupts: should contain a list of all VOP IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: Must contain - aclk_vop: for ddr buffer transfer. - hclk_vop: for ahb bus to R/W the phy regs. - dclk_vop: pixel clock. - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - axi - - ahb - - dclk - -- iommus: required a iommu node - -- port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -SoC specific DT entry: - vopb: vopb@ff930000 { - compatible = "rockchip,rk3288-vop"; - reg = <0xff930000 0x19c>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopb_mmu>; - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint=<&edp_in_vopb>; - }; - vopb_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; - }; - }; - }; diff --git a/dts/Bindings/video/samsung-fimd.txt b/dts/Bindings/video/samsung-fimd.txt deleted file mode 100644 index a8bbbde03e..0000000000 --- a/dts/Bindings/video/samsung-fimd.txt +++ /dev/null @@ -1,110 +0,0 @@ -Device-Tree bindings for Samsung SoC display controller (FIMD) - -FIMD (Fully Interactive Mobile Display) is the Display Controller for the -Samsung series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ - "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ - "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ - "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos4415-fimd"; /* for Exynos4415 SoC */ - "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ - -- reg: physical base address and length of the FIMD registers set. - -- interrupt-parent: should be the phandle of the fimd controller's - parent interrupt controller. - -- interrupts: should contain a list of all FIMD IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "sclk_fimd" and "fimd". - -Optional Properties: -- power-domains: a phandle to FIMD power domain node. -- samsung,invert-vden: video enable signal is inverted -- samsung,invert-vclk: video clock signal is inverted -- display-timings: timing settings for FIMD, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. -- samsung,sysreg: handle to syscon used to control the system registers -- i80-if-timings: timing configuration for lcd i80 interface support. - - cs-setup: clock cycles for the active period of address signal is enabled - until chip select is enabled. - If not specified, the default value(0) will be used. - - wr-setup: clock cycles for the active period of CS signal is enabled until - write signal is enabled. - If not specified, the default value(0) will be used. - - wr-active: clock cycles for the active period of CS is enabled. - If not specified, the default value(1) will be used. - - wr-hold: clock cycles for the active period of CS is disabled until write - signal is disabled. - If not specified, the default value(0) will be used. - - The parameters are defined as: - - VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? - : : : : : - Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX - | cs-setup+1 | : : : - |<---------->| : : : - Chip Select ???????????????|____________:____________:____________|?? - | wr-setup+1 | | wr-hold+1 | - |<---------->| |<---------->| - Write Enable ????????????????????????????|____________|??????????????? - | wr-active+1| - |<---------->| - Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- - -The device node can contain 'port' child nodes according to the bindings defined -in [2]. The following are properties specific to those nodes: -- reg: (required) port index, can be: - 0 - for CAMIF0 input, - 1 - for CAMIF1 input, - 2 - for CAMIF2 input, - 3 - for parallel output, - 4 - for write-back interface - -[1]: Documentation/devicetree/bindings/video/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SoC specific DT entry: - - fimd@11c00000 { - compatible = "samsung,exynos4210-fimd"; - interrupt-parent = <&combiner>; - reg = <0x11c00000 0x20000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock 140>, <&clock 283>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&pd_lcd0>; - status = "disabled"; - }; - -Board specific DT entry: - - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/dts/Bindings/video/sharp,ls037v7dw01.txt b/dts/Bindings/video/sharp,ls037v7dw01.txt deleted file mode 100644 index 0cc8981e9d..0000000000 --- a/dts/Bindings/video/sharp,ls037v7dw01.txt +++ /dev/null @@ -1,43 +0,0 @@ -SHARP LS037V7DW01 TFT-LCD panel -=================================== - -Required properties: -- compatible: "sharp,ls037v7dw01" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: a GPIO spec for the optional enable pin. - This pin is the INI pin as specified in the LS037V7DW01.pdf file. -- reset-gpios: a GPIO spec for the optional reset pin. - This pin is the RESB pin as specified in the LS037V7DW01.pdf file. -- mode-gpios: a GPIO - ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file. - -Required nodes: -- Video port for DPI input - -This panel can have zero to five GPIOs to configure to change configuration -between QVGA and VGA mode and the scan direction. As these pins can be also -configured with external pulls, all the GPIOs are considered optional with holes -in the array. - -Example -------- - -Example when connected to a omap2+ based device: - -lcd0: display { - compatible = "sharp,ls037v7dw01"; - power-supply = <&lcd_3v3>; - enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ - reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ - mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ - &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ - &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/video/simple-framebuffer-sunxi.txt b/dts/Bindings/video/simple-framebuffer-sunxi.txt deleted file mode 100644 index c46ba641a1..0000000000 --- a/dts/Bindings/video/simple-framebuffer-sunxi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Sunxi specific Simple Framebuffer bindings - -This binding documents sunxi specific extensions to the simple-framebuffer -bindings. The sunxi simplefb u-boot code relies on the devicetree containing -pre-populated simplefb nodes. - -These extensions are intended so that u-boot can select the right node based -on which pipeline is being used. As such they are solely intended for -firmware / bootloader use, and the OS should ignore them. - -Required properties: -- compatible: "allwinner,simple-framebuffer" -- allwinner,pipeline, one of: - "de_be0-lcd0" - "de_be1-lcd1" - "de_be0-lcd0-hdmi" - "de_be1-lcd1-hdmi" - -Example: - -chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; - status = "disabled"; - }; -}; diff --git a/dts/Bindings/video/simple-framebuffer.txt b/dts/Bindings/video/simple-framebuffer.txt deleted file mode 100644 index 4474ef6e0b..0000000000 --- a/dts/Bindings/video/simple-framebuffer.txt +++ /dev/null @@ -1,86 +0,0 @@ -Simple Framebuffer - -A simple frame-buffer describes a frame-buffer setup by firmware or -the bootloader, with the assumption that the display hardware has already -been set up to scan out from the memory pointed to by the reg property. - -Since simplefb nodes represent runtime information they must be sub-nodes of -the chosen node (*). Simplefb nodes must be named "framebuffer@<address>". - -If the devicetree contains nodes for the display hardware used by a simplefb, -then the simplefb node must contain a property called "display", which -contains a phandle pointing to the primary display hw node, so that the OS -knows which simplefb to disable when handing over control to a driver for the -real hardware. The bindings for the hw nodes must specify which node is -considered the primary node. - -It is advised to add display# aliases to help the OS determine how to number -things. If display# aliases are used, then if the simplefb node contains a -"display" property then the /aliases/display# path must point to the display -hw node the "display" property points to, otherwise it must point directly -to the simplefb node. - -If a simplefb node represents the preferred console for user interaction, -then the chosen node's stdout-path property should point to it, or to the -primary display hw node, as with display# aliases. If display aliases are -used then it should be set to the alias instead. - -It is advised that devicetree files contain pre-filled, disabled framebuffer -nodes, so that the firmware only needs to update the mode information and -enable them. This way if e.g. later on support for more display clocks get -added, the simplefb nodes will already contain this info and the firmware -does not need to be updated. - -If pre-filled framebuffer nodes are used, the firmware may need extra -information to find the right node. In that case an extra platform specific -compatible and platform specific properties should be used and documented, -see e.g. simple-framebuffer-sunxi.txt . - -Required properties: -- compatible: "simple-framebuffer" -- reg: Should contain the location and size of the framebuffer memory. -- width: The width of the framebuffer in pixels. -- height: The height of the framebuffer in pixels. -- stride: The number of bytes in each line of the framebuffer. -- format: The format of the framebuffer surface. Valid values are: - - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). - - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r). - -Optional properties: -- clocks : List of clocks used by the framebuffer. Clocks listed here - are expected to already be configured correctly. The OS must - ensure these clocks are not modified or disabled while the - simple framebuffer remains active. -- display : phandle pointing to the primary display hardware node - -Example: - -aliases { - display0 = &lcdc0; -} - -chosen { - framebuffer0: framebuffer@1d385000 { - compatible = "simple-framebuffer"; - reg = <0x1d385000 (1600 * 1200 * 2)>; - width = <1600>; - height = <1200>; - stride = <(1600 * 2)>; - format = "r5g6b5"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - display = <&lcdc0>; - }; - stdout-path = "display0"; -}; - -soc@01c00000 { - lcdc0: lcdc@1c0c000 { - compatible = "allwinner,sun4i-a10-lcdc"; - ... - }; -}; - - -*) Older devicetree files may have a compatible = "simple-framebuffer" node -in a different place, operating systems must first enumerate any compatible -nodes found under chosen and then check for other compatible nodes. diff --git a/dts/Bindings/video/sony,acx565akm.txt b/dts/Bindings/video/sony,acx565akm.txt deleted file mode 100644 index e123332807..0000000000 --- a/dts/Bindings/video/sony,acx565akm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Sony ACX565AKM SDI Panel -======================== - -Required properties: -- compatible: "sony,acx565akm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio - -Required nodes: -- Video port for SDI input - -Example -------- - -acx565akm@2 { - compatible = "sony,acx565akm"; - spi-max-frequency = <6000000>; - reg = <2>; - - label = "lcd"; - reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ - - port { - lcd_in: endpoint { - remote-endpoint = <&sdi_out>; - }; - }; -}; diff --git a/dts/Bindings/video/ssd1289fb.txt b/dts/Bindings/video/ssd1289fb.txt deleted file mode 100644 index 4fcd5e68cb..0000000000 --- a/dts/Bindings/video/ssd1289fb.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Solomon SSD1289 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,ssd1289fb". The only supported bus for - now is lbc. - - reg: Should contain address of the controller on the LBC bus. The detail - was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt - -Examples: -display@2,0 { - compatible = "solomon,ssd1289fb"; - reg = <0x2 0x0000 0x0004>; -}; diff --git a/dts/Bindings/video/ssd1307fb.txt b/dts/Bindings/video/ssd1307fb.txt deleted file mode 100644 index d1be78db63..0000000000 --- a/dts/Bindings/video/ssd1307fb.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for - now is i2c, and the supported chips are ssd1305, ssd1306 and ssd1307. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - reset-gpios: Should contain the GPIO used to reset the OLED display - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-active-low: Is the reset gpio is active on physical low? - - solomon,segment-no-remap: Display needs normal (non-inverted) data column - to segment mapping - - solomon,com-seq: Display uses sequential COM pin configuration - - solomon,com-lrremap: Display uses left-right COM pin remap - - solomon,com-invdir: Display uses inverted COM pin scan direction - - solomon,com-offset: Number of the COM pin wired to the first display line - - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. - - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. - This needs to be the higher, the higher the capacitance - of the OLED's pixels is - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - reset-active-low; -}; - -ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - reset-active-low; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; -}; diff --git a/dts/Bindings/video/thine,thc63lvdm83d b/dts/Bindings/video/thine,thc63lvdm83d deleted file mode 100644 index 527e236e9a..0000000000 --- a/dts/Bindings/video/thine,thc63lvdm83d +++ /dev/null @@ -1,50 +0,0 @@ -THine Electronics THC63LVDM83D LVDS serializer ----------------------------------------------- - -The THC63LVDM83D is an LVDS serializer designed to support pixel data -transmission between a host and a flat panel. - -Required properties: - -- compatible: Should be "thine,thc63lvdm83d" - -Optional properties: - -- pwdn-gpios: Power down control GPIO - -Required nodes: - -The THC63LVDM83D has two video ports. Their connections are modeled using the -OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for CMOS/TTL input -- Video port 1 for LVDS output - - -Example -------- - - lvds_enc: encoder@0 { - compatible = "thine,thc63lvdm83d"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint@0 { - remote-endpoint = <&rgb_out>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/video/ti,dra7-dss.txt b/dts/Bindings/video/ti,dra7-dss.txt deleted file mode 100644 index f33a05137b..0000000000 --- a/dts/Bindings/video/ti,dra7-dss.txt +++ /dev/null @@ -1,69 +0,0 @@ -Texas Instruments DRA7x Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,dra7-dss" -- reg: address and length of the register spaces for 'dss' -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" -- syscon: phandle to control module core syscon node - -Optional properties: - -Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties -can be used to describe the video PLLs: - -- reg: address and length of the register spaces for 'pll1_clkctrl', - 'pll1', 'pll2_clkctrl', 'pll2' -- clocks: handle to video1 pll clock and video2 pll clock -- clock-names: "video1_clk" and "video2_clk" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,dra7-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - -HDMI ----- - -Required properties: -- compatible: "ti,dra7-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/dts/Bindings/video/ti,omap-dss.txt b/dts/Bindings/video/ti,omap-dss.txt deleted file mode 100644 index e1ef295693..0000000000 --- a/dts/Bindings/video/ti,omap-dss.txt +++ /dev/null @@ -1,211 +0,0 @@ -Texas Instruments OMAP Display Subsystem -======================================== - -Generic Description -------------------- - -This document is a generic description of the OMAP Display Subsystem bindings. -Binding details for each OMAP SoC version are described in respective binding -documentation. - -The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and -a number of encoder modules. All DSS versions contain DSS Core and DISPC, but -the encoder modules vary. - -The DSS Core is the parent of the other DSS modules, and manages clock routing, -integration to the SoC, etc. - -DISPC is the display controller, which reads pixels from the memory and outputs -a RGB pixel stream to encoders. - -The encoder modules encode the received RGB pixel stream to a video output like -HDMI, MIPI DPI, etc. - -Video Ports ------------ - -The DSS Core and the encoders have video port outputs. The structure of the -video ports is described in Documentation/devicetree/bindings/graph.txt, -and the properties for the ports and endpoints for each encoder are -described in the SoC's DSS binding documentation. - -The video ports are used to describe the connections to external hardware, like -panels or external encoders. - -Aliases -------- - -The board dts file may define aliases for displays to assign "displayX" style -name for each display. If no aliases are defined, a semi-random number is used -for the display. - -Example -------- - -A shortened example of the DSS description for OMAP4, with non-relevant parts -removed, defined in omap4.dtsi: - -dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&dss_dss_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&dss_dss_clk>; - clock-names = "fck"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; - clock-names = "fck", "sys_clk"; - }; -}; - -A shortened example of the board description for OMAP4 Panda board, defined in -omap4-panda.dts. - -The Panda board has a DVI and a HDMI connector, and the board contains a TFP410 -chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level -shifter). The video pipelines for the connectors are formed as follows: - -DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector -OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector - -/ { - aliases { - display0 = &dvi0; - display1 = &hdmi0; - }; - - tfp410: encoder@0 { - compatible = "ti,tfp410"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */ - - pinctrl-names = "default"; - pinctrl-0 = <&tfp410_pins>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tpd12s015: encoder@1 { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; -}; - -&dss { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins>; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&vdac>; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; diff --git a/dts/Bindings/video/ti,omap2-dss.txt b/dts/Bindings/video/ti,omap2-dss.txt deleted file mode 100644 index fa8bb2ed11..0000000000 --- a/dts/Bindings/video/ti,omap2-dss.txt +++ /dev/null @@ -1,54 +0,0 @@ -Texas Instruments OMAP2 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap2-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" - -Optional nodes: -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap2-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt - - -RFBI ----- - -Required properties: -- compatible: "ti,omap2-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" - - -VENC ----- - -Required properties: -- compatible: "ti,omap2-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC - -VENC Endpoint required properties: - -Required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video diff --git a/dts/Bindings/video/ti,omap3-dss.txt b/dts/Bindings/video/ti,omap3-dss.txt deleted file mode 100644 index 0023fa4b13..0000000000 --- a/dts/Bindings/video/ti,omap3-dss.txt +++ /dev/null @@ -1,83 +0,0 @@ -Texas Instruments OMAP3 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap3-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Optional nodes: -- Video ports: - - Port 0: DPI output - - Port 1: SDI output - -DPI Endpoint required properties: -- data-lines: number of lines used - -SDI Endpoint required properties: -- datapairs: number of datapairs used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap3-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap3-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - - -VENC ----- - -Required properties: -- compatible: "ti,omap3-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC -- clocks: handle to fclk -- clock-names: "fck" - -VENC Endpoint required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video - - -DSI ---- - -Required properties: -- compatible: "ti,omap3-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... diff --git a/dts/Bindings/video/ti,omap4-dss.txt b/dts/Bindings/video/ti,omap4-dss.txt deleted file mode 100644 index b8c29fbd1f..0000000000 --- a/dts/Bindings/video/ti,omap4-dss.txt +++ /dev/null @@ -1,115 +0,0 @@ -Texas Instruments OMAP4 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap4-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: RFBI, VENC, DSI, HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap4-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap4-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - -Optional nodes: -- Video port for RFBI output -- RFBI controlled peripherals - - -VENC ----- - -Required properties: -- compatible: "ti,omap4-venc" -- reg: address and length of the register space -- ti,hwmods: "dss_venc" -- vdda-supply: power supply for DAC -- clocks: handle to fclk -- clock-names: "fck" - -Optional nodes: -- Video port for VENC output - -VENC Endpoint required properties: -- ti,invert-polarity: invert the polarity of the video signal -- ti,channels: 1 for composite, 2 for s-video - - -DSI ---- - -Required properties: -- compatible: "ti,omap4-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" or "dss_dsi2" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for DSI output -- DSI controlled peripherals - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... - - -HDMI ----- - -Required properties: -- compatible: "ti,omap4-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/dts/Bindings/video/ti,omap5-dss.txt b/dts/Bindings/video/ti,omap5-dss.txt deleted file mode 100644 index 38ffc8fcd8..0000000000 --- a/dts/Bindings/video/ti,omap5-dss.txt +++ /dev/null @@ -1,96 +0,0 @@ -Texas Instruments OMAP5 Display Subsystem -========================================= - -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic -description about OMAP Display Subsystem bindings. - -DSS Core --------- - -Required properties: -- compatible: "ti,omap5-dss" -- reg: address and length of the register space -- ti,hwmods: "dss_core" -- clocks: handle to fclk -- clock-names: "fck" - -Required nodes: -- DISPC - -Optional nodes: -- DSS Submodules: RFBI, DSI, HDMI -- Video port for DPI output - -DPI Endpoint required properties: -- data-lines: number of lines used - - -DISPC ------ - -Required properties: -- compatible: "ti,omap5-dispc" -- reg: address and length of the register space -- ti,hwmods: "dss_dispc" -- interrupts: the DISPC interrupt -- clocks: handle to fclk -- clock-names: "fck" - - -RFBI ----- - -Required properties: -- compatible: "ti,omap5-rfbi" -- reg: address and length of the register space -- ti,hwmods: "dss_rfbi" -- clocks: handles to fclk and iclk -- clock-names: "fck", "ick" - -Optional nodes: -- Video port for RFBI output -- RFBI controlled peripherals - - -DSI ---- - -Required properties: -- compatible: "ti,omap5-dsi" -- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' -- reg-names: "proto", "phy", "pll" -- interrupts: the DSI interrupt line -- ti,hwmods: "dss_dsi1" or "dss_dsi2" -- vdd-supply: power supply for DSI -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for DSI output -- DSI controlled peripherals - -DSI Endpoint required properties: -- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, - DATA1+, DATA1-, ... - - -HDMI ----- - -Required properties: -- compatible: "ti,omap5-hdmi" -- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', - 'core' -- reg-names: "wp", "pll", "phy", "core" -- interrupts: the HDMI interrupt line -- ti,hwmods: "dss_hdmi" -- vdda-supply: vdda power supply -- clocks: handles to fclk and pll clock -- clock-names: "fck", "sys_clk" - -Optional nodes: -- Video port for HDMI output - -HDMI Endpoint optional properties: -- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, - D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/dts/Bindings/video/ti,opa362.txt b/dts/Bindings/video/ti,opa362.txt deleted file mode 100644 index f96083c0bd..0000000000 --- a/dts/Bindings/video/ti,opa362.txt +++ /dev/null @@ -1,38 +0,0 @@ -OPA362 analog video amplifier - -Required properties: -- compatible: "ti,opa362" -- enable-gpios: enable/disable output gpio - -Required node: -- Video port 0 for opa362 input -- Video port 1 for opa362 output - -Example: - -tv_amp: opa362 { - compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - opa_in: endpoint@0 { - remote-endpoint = <&venc_out>; - }; - }; - - port@1 { - reg = <1>; - opa_out: endpoint@0 { - remote-endpoint = <&tv_connector_in>; - }; - }; - }; -}; - - - diff --git a/dts/Bindings/video/ti,tfp410.txt b/dts/Bindings/video/ti,tfp410.txt deleted file mode 100644 index 2cbe32a3d0..0000000000 --- a/dts/Bindings/video/ti,tfp410.txt +++ /dev/null @@ -1,41 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio - -Required nodes: -- Video port 0 for DPI input -- Video port 1 for DVI output - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/dts/Bindings/video/ti,tpd12s015.txt b/dts/Bindings/video/ti,tpd12s015.txt deleted file mode 100644 index 26e6d32e3f..0000000000 --- a/dts/Bindings/video/ti,tpd12s015.txt +++ /dev/null @@ -1,44 +0,0 @@ -TPD12S015 HDMI level shifter and ESD protection chip -==================================================== - -Required properties: -- compatible: "ti,tpd12s015" - -Optional properties: -- gpios: CT CP HPD, LS OE and HPD gpios - -Required nodes: -- Video port 0 for HDMI input -- Video port 1 for HDMI output - -Example -------- - -tpd12s015: encoder@1 { - compatible = "ti,tpd12s015"; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; -}; diff --git a/dts/Bindings/video/toppoly,td028ttec1.txt b/dts/Bindings/video/toppoly,td028ttec1.txt deleted file mode 100644 index 7175dc3740..0000000000 --- a/dts/Bindings/video/toppoly,td028ttec1.txt +++ /dev/null @@ -1,30 +0,0 @@ -Toppoly TD028TTEC1 Panel -======================== - -Required properties: -- compatible: "toppoly,td028ttec1" - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; - diff --git a/dts/Bindings/video/tpo,td043mtea1.txt b/dts/Bindings/video/tpo,td043mtea1.txt deleted file mode 100644 index ec6d629751..0000000000 --- a/dts/Bindings/video/tpo,td043mtea1.txt +++ /dev/null @@ -1,33 +0,0 @@ -TPO TD043MTEA1 Panel -==================== - -Required properties: -- compatible: "tpo,td043mtea1" -- reset-gpios: panel reset gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "tpo,td043mtea1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - reset-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/video/vga-connector.txt b/dts/Bindings/video/vga-connector.txt deleted file mode 100644 index c727f298e7..0000000000 --- a/dts/Bindings/video/vga-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -VGA Connector -============= - -Required properties: - -- compatible: "vga-connector" - -Optional properties: - -- label: a symbolic name for the connector corresponding to a hardware label -- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC - -Required nodes: - -The VGA connector internal connections are modeled using the OF graph bindings -specified in Documentation/devicetree/bindings/graph.txt. - -The VGA connector has a single port that must be connected to a video source -port. - - -Example -------- - -vga0: connector@0 { - compatible = "vga-connector"; - label = "vga"; - - ddc-i2c-bus = <&i2c3>; - - port { - vga_connector_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; -}; diff --git a/dts/Bindings/video/via,vt8500-fb.txt b/dts/Bindings/video/via,vt8500-fb.txt deleted file mode 100644 index 2871e218a0..0000000000 --- a/dts/Bindings/video/via,vt8500-fb.txt +++ /dev/null @@ -1,36 +0,0 @@ -VIA VT8500 Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-fb" -- reg : Should contain 1 register ranges(address and length) -- interrupts : framebuffer controller interrupt -- bits-per-pixel : bit depth of framebuffer (16 or 32) - -Required subnodes: -- display-timings: see display-timing.txt for information - -Example: - - fb@d8050800 { - compatible = "via,vt8500-fb"; - reg = <0xd800e400 0x400>; - interrupts = <12>; - bits-per-pixel = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: 800x480 { - clock-frequency = <0>; /* unused but required */ - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - }; - }; - }; - diff --git a/dts/Bindings/video/wm,prizm-ge-rops.txt b/dts/Bindings/video/wm,prizm-ge-rops.txt deleted file mode 100644 index a850fa011f..0000000000 --- a/dts/Bindings/video/wm,prizm-ge-rops.txt +++ /dev/null @@ -1,13 +0,0 @@ -VIA/Wondermedia Graphics Engine Controller ------------------------------------------------------ - -Required properties: -- compatible : "wm,prizm-ge-rops" -- reg : Should contain 1 register ranges(address and length) - -Example: - - ge_rops@d8050400 { - compatible = "wm,prizm-ge-rops"; - reg = <0xd8050400 0x100>; - }; diff --git a/dts/Bindings/video/wm,wm8505-fb.txt b/dts/Bindings/video/wm,wm8505-fb.txt deleted file mode 100644 index 0bcadb2840..0000000000 --- a/dts/Bindings/video/wm,wm8505-fb.txt +++ /dev/null @@ -1,33 +0,0 @@ -Wondermedia WM8505 Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : "wm,wm8505-fb" -- reg : Should contain 1 register ranges(address and length) -- bits-per-pixel : bit depth of framebuffer (16 or 32) - -Required subnodes: -- display-timings: see display-timing.txt for information - -Example: - - fb@d8051700 { - compatible = "wm,wm8505-fb"; - reg = <0xd8051700 0x200>; - bits-per-pixel = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: 800x480 { - clock-frequency = <0>; /* unused but required */ - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - }; - }; - }; |