Add devicetree source files as of Linux-3.15-rc2

This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:

git://xenbits.xen.org/people/ianc/device-tree-rebasing.git

The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.

To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 19 insertions, 0 deletions

diff --git a/dts/Bindings/w1/fsl-imx-owire.txt b/dts/Bindings/w1/fsl-imx-owire.txt
new file mode 100644
index 0000000000..ecf42c0768
--- /dev/null
+++ b/dts/Bindings/w1/fsl-imx-owire.txt
@@ -0,0 +1,19 @@
+* Freescale i.MX One wire bus master controller
+
+Required properties:
+- compatible : should be "fsl,imx21-owire"
+- reg : Address and length of the register set for the device
+
+Optional properties:
+- clocks : phandle of clock that supplies the module (required if platform
+		clock bindings use device tree)
+
+Example:
+
+- From imx53.dtsi:
+owire: owire@63fa4000 {
+	compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+	reg = <0x63fa4000 0x4000>;
+	clocks = <&clks 159>;
+	status = "disabled";
+};