dts: update to v5.4-rc3

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 28 insertions, 11 deletions

diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt
index dd63151dc8..b143d9a21b 100644
--- a/dts/Bindings/serial/renesas,sci-serial.txt
+++ b/dts/Bindings/serial/renesas,sci-serial.txt
@@ -26,6 +26,8 @@ Required properties:
     - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
     - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
     - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
+    - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
+    - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
     - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
     - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
diff --git a/dts/Bindings/usb/amlogic,dwc3.txt b/dts/Bindings/usb/amlogic,dwc3.txt
index b9f04e617e..6ffb09be7a 100644
--- a/dts/Bindings/usb/amlogic,dwc3.txt
+++ b/dts/Bindings/usb/amlogic,dwc3.txt
@@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of
 the node is not important. The content of the node is defined in dwc2.txt.
 
 PHY documentation is provided in the following places:
-- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
-- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
 
 Example device nodes:
 	usb: usb@ffe09000 {
diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml
index 059f6ef1ad..1ca64c8519 100644
--- a/dts/Bindings/usb/generic-ehci.yaml
+++ b/dts/Bindings/usb/generic-ehci.yaml
@@ -63,7 +63,11 @@ properties:
     description:
       Set this flag to force EHCI reset after resume.
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -89,6 +93,7 @@ examples:
         interrupts = <39>;
         clocks = <&ahb_gates 1>;
         phys = <&usbphy 1>;
+        phy-names = "usb";
     };
 
 ...
diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml
index da5a14becb..bcffec1f13 100644
--- a/dts/Bindings/usb/generic-ohci.yaml
+++ b/dts/Bindings/usb/generic-ohci.yaml
@@ -67,7 +67,11 @@ properties:
     description:
       Overrides the detected port count
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -84,6 +88,7 @@ examples:
           interrupts = <64>;
           clocks = <&usb_clk 6>, <&ahb_gates 2>;
           phys = <&usbphy 1>;
+          phy-names = "usb";
       };
 
 ...
diff --git a/dts/Bindings/usb/mediatek,mtk-xhci.txt b/dts/Bindings/usb/mediatek,mtk-xhci.txt
index f3e4acecab..42d8814f90 100644
--- a/dts/Bindings/usb/mediatek,mtk-xhci.txt
+++ b/dts/Bindings/usb/mediatek,mtk-xhci.txt
@@ -33,7 +33,7 @@ Required properties:
 	"dma_ck": dma_bus clock for data transfer by DMA,
 	"xhci_ck": controller clock
 
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
 
 Optional properties:
  - wakeup-source : enable USB remote wakeup;
@@ -53,7 +53,7 @@ Optional properties:
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  - imod-interval-ns: default interrupt moderation interval is 5000ns
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Example:
diff --git a/dts/Bindings/usb/mediatek,mtu3.txt b/dts/Bindings/usb/mediatek,mtu3.txt
index b9af7f5ee9..e0ae6096f7 100644
--- a/dts/Bindings/usb/mediatek,mtu3.txt
+++ b/dts/Bindings/usb/mediatek,mtu3.txt
@@ -17,7 +17,7 @@ Required properties:
  - clock-names : must contain "sys_ck" for clock of controller,
 	the following clocks are optional:
 	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
  - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt
 
@@ -60,7 +60,7 @@ Optional properties:
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Sub-nodes:
diff --git a/dts/Bindings/usb/usb-hcd.yaml b/dts/Bindings/usb/usb-hcd.yaml
index 9c8c56d3a7..7263b7f2b5 100644
--- a/dts/Bindings/usb/usb-hcd.yaml
+++ b/dts/Bindings/usb/usb-hcd.yaml
@@ -18,8 +18,13 @@ properties:
     description:
       List of all the USB PHYs on this HCD
 
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
 examples:
   - |
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
+        phy-names = "usb";
     };
diff --git a/dts/Bindings/usb/usb-uhci.txt b/dts/Bindings/usb/usb-uhci.txt
index cc2e6f7d60..d1702eb2c8 100644
--- a/dts/Bindings/usb/usb-uhci.txt
+++ b/dts/Bindings/usb/usb-uhci.txt
@@ -6,7 +6,7 @@ Required properties:
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : UHCI controller interrupt
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Example:
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index 97400e8f86..b49b819571 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -41,9 +41,9 @@ Optional properties:
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
   - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.txt in the current directory
+  - phys : see usb-hcd.yaml in the current directory
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.