dts: update to v5.19-rc2

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

35 files changed, 99 insertions, 64 deletions

diff --git a/dts/Bindings/clock/idt,versaclock5.yaml b/dts/Bindings/clock/idt,versaclock5.yaml
index be66f1e8b5..7c331bfbe3 100644
--- a/dts/Bindings/clock/idt,versaclock5.yaml
+++ b/dts/Bindings/clock/idt,versaclock5.yaml
@@ -45,7 +45,7 @@ description: |
   The case where SH and SP are both 1 is likely not very interesting.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 properties:
   compatible:
diff --git a/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f..ce91a91976 100644
--- a/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem
diff --git a/dts/Bindings/display/arm,malidp.yaml b/dts/Bindings/display/arm,malidp.yaml
index 795a08ac9f..2a17ec6fc9 100644
--- a/dts/Bindings/display/arm,malidp.yaml
+++ b/dts/Bindings/display/arm,malidp.yaml
@@ -71,11 +71,6 @@ properties:
       - description: number of output lines for the green channel (G)
       - description: number of output lines for the blue channel (B)
 
-  arm,malidp-arqos-high-level:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      integer describing the ARQoS levels of DP500's QoS signaling
-
   arm,malidp-arqos-value:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -113,7 +108,7 @@ examples:
         clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
         clock-names = "pxlclk", "mclk", "aclk", "pclk";
         arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-        arm,malidp-arqos-high-level = <0xd000d000>;
+        arm,malidp-arqos-value = <0xd000d000>;
 
         port {
             dp0_output: endpoint {
diff --git a/dts/Bindings/display/msm/dpu-sc7180.yaml b/dts/Bindings/display/msm/dpu-sc7180.yaml
index b41991eaa4..d3c3e4b078 100644
--- a/dts/Bindings/display/msm/dpu-sc7180.yaml
+++ b/dts/Bindings/display/msm/dpu-sc7180.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7180 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
diff --git a/dts/Bindings/display/msm/dpu-sc7280.yaml b/dts/Bindings/display/msm/dpu-sc7280.yaml
index 6e417d06fc..f427eec3d3 100644
--- a/dts/Bindings/display/msm/dpu-sc7280.yaml
+++ b/dts/Bindings/display/msm/dpu-sc7280.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7280
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
diff --git a/dts/Bindings/display/msm/dpu-sdm845.yaml b/dts/Bindings/display/msm/dpu-sdm845.yaml
index 1a42491efd..2bb8896bef 100644
--- a/dts/Bindings/display/msm/dpu-sdm845.yaml
+++ b/dts/Bindings/display/msm/dpu-sdm845.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SDM845 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
diff --git a/dts/Bindings/display/msm/dsi-controller-main.yaml b/dts/Bindings/display/msm/dsi-controller-main.yaml
index 7095ec3c89..880bfe9308 100644
--- a/dts/Bindings/display/msm/dsi-controller-main.yaml
+++ b/dts/Bindings/display/msm/dsi-controller-main.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI controller
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: "../dsi-controller.yaml#"
diff --git a/dts/Bindings/display/msm/dsi-phy-10nm.yaml b/dts/Bindings/display/msm/dsi-phy-10nm.yaml
index 2d5a766d02..716f921e35 100644
--- a/dts/Bindings/display/msm/dsi-phy-10nm.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-10nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 10nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml
index 81dbee4803..1342d74ecf 100644
--- a/dts/Bindings/display/msm/dsi-phy-14nm.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 14nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/dts/Bindings/display/msm/dsi-phy-20nm.yaml b/dts/Bindings/display/msm/dsi-phy-20nm.yaml
index b8de785ce8..9c1f9140c7 100644
--- a/dts/Bindings/display/msm/dsi-phy-20nm.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-20nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 20nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/dts/Bindings/display/msm/dsi-phy-28nm.yaml b/dts/Bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b..3d8540a06f 100644
--- a/dts/Bindings/display/msm/dsi-phy-28nm.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-28nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 28nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/dts/Bindings/display/msm/dsi-phy-common.yaml b/dts/Bindings/display/msm/dsi-phy-common.yaml
index 502bdda902..76d40f7933 100644
--- a/dts/Bindings/display/msm/dsi-phy-common.yaml
+++ b/dts/Bindings/display/msm/dsi-phy-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Description of Qualcomm Display DSI PHY common dt properties
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   This defines the DSI PHY dt properties which are common for all
diff --git a/dts/Bindings/hwmon/vexpress.txt b/dts/Bindings/hwmon/vexpress.txt
index 9c27ed694b..4a4df4ffc4 100644
--- a/dts/Bindings/hwmon/vexpress.txt
+++ b/dts/Bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:
diff --git a/dts/Bindings/iommu/xen,grant-dma.yaml b/dts/Bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 0000000000..be1539d234
--- /dev/null
+++ b/dts/Bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
index c7cfa6c2cd..935d63d181 100644
--- a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -150,7 +150,6 @@ allOf:
           description: 5 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          maxItems: 6
           items:
             - const: sid
             - const: broadcast
@@ -170,7 +169,6 @@ allOf:
           description: 17 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          minItems: 18
           items:
             - const: sid
             - const: broadcast
@@ -202,7 +200,6 @@ allOf:
           description: 17 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          minItems: 18
           items:
             - const: sid
             - const: broadcast
diff --git a/dts/Bindings/mfd/maxim,max77714.yaml b/dts/Bindings/mfd/maxim,max77714.yaml
index 74a6867d3c..edac14af10 100644
--- a/dts/Bindings/mfd/maxim,max77714.yaml
+++ b/dts/Bindings/mfd/maxim,max77714.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 description: |
   MAX77714 is a Power Management IC with 4 buck regulators, 9
diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
index b672202fff..5ecdac9de4 100644
--- a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -75,7 +75,6 @@ examples:
       sd-uhs-sdr104;
       sdhci,auto-cmd12;
       interrupts = <0x0 0x26 0x4>;
-      interrupt-names = "sdio0_0";
       clocks = <&scmi_clk 245>;
       clock-names = "sw_sdio";
     };
@@ -94,7 +93,6 @@ examples:
       non-removable;
       bus-width = <0x8>;
       interrupts = <0x0 0x27 0x4>;
-      interrupt-names = "sdio1_0";
       clocks = <&scmi_clk 245>;
       clock-names = "sw_sdio";
     };
diff --git a/dts/Bindings/mmc/marvell,xenon-sdhci.yaml b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml
index c79639e902..3ee7588865 100644
--- a/dts/Bindings/mmc/marvell,xenon-sdhci.yaml
+++ b/dts/Bindings/mmc/marvell,xenon-sdhci.yaml
@@ -56,6 +56,9 @@ properties:
       - const: core
       - const: axi
 
+  interrupts:
+    maxItems: 1
+
   marvell,xenon-sdhc-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
@@ -145,7 +148,6 @@ allOf:
           items:
             - description: Xenon IP registers
             - description: Armada 3700 SoC PHY PAD Voltage Control register
-          minItems: 2
 
         marvell,pad-type:
           $ref: /schemas/types.yaml#/definitions/string
diff --git a/dts/Bindings/nvme/apple,nvme-ans.yaml b/dts/Bindings/nvme/apple,nvme-ans.yaml
index ddff9233b1..34dd1cc671 100644
--- a/dts/Bindings/nvme/apple,nvme-ans.yaml
+++ b/dts/Bindings/nvme/apple,nvme-ans.yaml
@@ -55,7 +55,6 @@ properties:
     maxItems: 1
 
   apple,sart:
-    maxItems: 1
     $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Reference to the SART address filter.
diff --git a/dts/Bindings/phy/phy-stih407-usb.txt b/dts/Bindings/phy/phy-stih407-usb.txt
index de6a706abc..35f03df001 100644
--- a/dts/Bindings/phy/phy-stih407-usb.txt
+++ b/dts/Bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 60dc27834e..b078009ed5 100644
--- a/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QMP USB3 DP PHY controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 properties:
   compatible:
diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml
index 0ab3dad3f1..d68ab49345 100644
--- a/dts/Bindings/phy/qcom,qusb2-phy.yaml
+++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QUSB2 phy controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description:
   QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
diff --git a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
index 1ce251de08..7a0e6a9854 100644
--- a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Synopsys Femto High-Speed USB PHY V2
 
 maintainers:
-  - Wesley Cheng <wcheng@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description: |
   Qualcomm High-Speed USB PHY
diff --git a/dts/Bindings/pinctrl/pinctrl-rk805.txt b/dts/Bindings/pinctrl/pinctrl-rk805.txt
index cbcbd31e3c..939cb5b6ff 100644
--- a/dts/Bindings/pinctrl/pinctrl-rk805.txt
+++ b/dts/Bindings/pinctrl/pinctrl-rk805.txt
@@ -27,7 +27,7 @@ Required properties:
 - pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
 
 First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rk808.txt
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
 
 Optional properties:
 -------------------
diff --git a/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml
index 4d820df24b..6f17f39916 100644
--- a/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -32,31 +32,37 @@ patternProperties:
           groups:
             description: The pin group to select.
             enum: [
+              # common
+              i2c, spi, wdt,
+
               # For MT7620 SoC
-              ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk,
-              uartf, uartlite, wdt, wled,
+              ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
+              uartf, uartlite, wled,
 
               # For MT7628 and MT7688 SoCs
-              gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+              gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
               p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
-              pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2,
-              wdt, wled_an, wled_kn,
+              pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
+              wled_an, wled_kn,
             ]
 
           function:
             description: The mux function to select.
             enum: [
+              # common
+              gpio, i2c, refclk, spi,
+
               # For MT7620 SoC
-              ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa,
-              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk,
-              rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk,
+              ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
+              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+              rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
               wdt rst, wled,
 
               # For MT7628 and MT7688 SoCs
-              antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
+              antenna, debug, i2s, jtag, p0led_an, p0led_kn,
               p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
               p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
-              refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1,
+              rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
               spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
             ]
 
diff --git a/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml
index 425401c542..f602a5d6e1 100644
--- a/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -33,32 +33,29 @@ patternProperties:
           groups:
             description: The pin group to select.
             enum: [
+              # common
+              i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite,
+
               # For RT3050, RT3052 and RT3350 SoCs
-              i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
+              sdram,
 
               # For RT3352 SoC
-              i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf,
-              uartlite,
-
-              # For RT5350 SoC
-              i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
+              lna, pa
             ]
 
           function:
             description: The mux function to select.
             enum: [
+              # common
+              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio,
+              pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
+              uartlite, wdg_cs1,
+
               # For RT3050, RT3052 and RT3350 SoCs
-              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio,
-              pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite,
+              sdram,
 
               # For RT3352 SoC
-              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio,
-              pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
-              uartlite, wdg_cs1,
-
-              # For RT5350 SoC
-              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio,
-              pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1,
+              lna, pa
             ]
 
         required:
diff --git a/dts/Bindings/power/supply/maxim,max77976.yaml b/dts/Bindings/power/supply/maxim,max77976.yaml
index 675b9b26d2..f23dcc5079 100644
--- a/dts/Bindings/power/supply/maxim,max77976.yaml
+++ b/dts/Bindings/power/supply/maxim,max77976.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Maxim Integrated MAX77976 Battery charger
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 description: |
   The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
diff --git a/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 12ed98c28a..dbe78cd4ad 100644
--- a/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/dts/Bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The Qualcomm PMIC VBUS output regulator driver
 
 maintainers:
-  - Wesley Cheng <wcheng@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description: |
   This regulator driver controls the VBUS output by the Qualcomm PMIC.  This
diff --git a/dts/Bindings/regulator/vexpress.txt b/dts/Bindings/regulator/vexpress.txt
index d775f72487..1c2e92c783 100644
--- a/dts/Bindings/regulator/vexpress.txt
+++ b/dts/Bindings/regulator/vexpress.txt
@@ -4,7 +4,7 @@ Versatile Express voltage regulators
 Requires node properties:
 - "compatible" value: "arm,vexpress-volt"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Required regulator properties:
diff --git a/dts/Bindings/usb/dwc3-st.txt b/dts/Bindings/usb/dwc3-st.txt
index bf73de0d5b..4aa368447b 100644
--- a/dts/Bindings/usb/dwc3-st.txt
+++ b/dts/Bindings/usb/dwc3-st.txt
@@ -13,7 +13,7 @@ Required properties:
  - resets	: list of phandle and reset specifier pairs. There should be two entries, one
 		  for the powerdown and softreset lines of the usb3 IP
  - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
diff --git a/dts/Bindings/usb/ehci-st.txt b/dts/Bindings/usb/ehci-st.txt
index 065c91d955..d6f2bdee20 100644
--- a/dts/Bindings/usb/ehci-st.txt
+++ b/dts/Bindings/usb/ehci-st.txt
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
  - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
 			  of the USB IP
  - reset-names		: should be "power" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/dts/Bindings/usb/ohci-st.txt b/dts/Bindings/usb/ohci-st.txt
index 44c998c16f..1c735573ab 100644
--- a/dts/Bindings/usb/ohci-st.txt
+++ b/dts/Bindings/usb/ohci-st.txt
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 
  - resets		: phandle to the powerdown and reset controller for the USB IP
  - reset-names		: should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml
index e336fe2e03..749e1963dd 100644
--- a/dts/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/Bindings/usb/qcom,dwc3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SuperSpeed DWC3 USB SoC controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 properties:
   compatible:
diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml
index 6bb20b4554..0496773a3c 100644
--- a/dts/Bindings/vendor-prefixes.yaml
+++ b/dts/Bindings/vendor-prefixes.yaml
@@ -143,6 +143,9 @@ patternProperties:
     description: ASPEED Technology Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
+  "^atheros,.*":
+    description: Qualcomm Atheros, Inc. (deprecated, use qca)
+    deprecated: true
   "^atlas,.*":
     description: Atlas Scientific LLC
   "^atmel,.*":
diff --git a/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index cbcf19f514..ed6c1ca80d 100644
--- a/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/dts/Bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -64,7 +64,6 @@ if:
 then:
   properties:
     clocks:
-      minItems: 2
       items:
         - description: High-frequency oscillator input, divided internally
         - description: Low-frequency oscillator input