dts: update to v4.17-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 55 insertions, 27 deletions

diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi
index aeb49c4bd7..10868ba327 100644
--- a/dts/src/arm/arm-realview-pbx.dtsi
+++ b/dts/src/arm/arm-realview-pbx.dtsi
@@ -34,7 +34,8 @@
 		serial1 = &serial1;
 		serial2 = &serial2;
 		serial3 = &serial3;
-		i2c0 = &i2c;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 
 	memory {
@@ -158,6 +159,49 @@
 		port1-otg;
 	};
 
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "arm,realview-pbx-soc", "simple-bus";
 		#address-cells = <1>;
@@ -285,7 +329,7 @@
 					       <&timclk>;
 		};
 
-		i2c: i2c@10002000 {
+		i2c0: i2c@10002000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "arm,versatile-i2c";
@@ -396,7 +440,12 @@
 			clock-names = "apb_pclk";
 		};
 
-		/* DVI serial bus control is at 10016000 */
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
 
 		rtc: rtc@10017000 {
 			compatible = "arm,pl031", "arm,primecell";
@@ -506,36 +555,15 @@
 			interrupt-names = "combined";
 			clocks = <&oscclk4>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
 
 			port {
 				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
+					remote-endpoint = <&vga_bridge_in>;
 					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
-				};
-			};
 		};
 	};
 };