dts: update to v4.7-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 274 deletions

diff --git a/dts/src/arm/ea3250.dts b/dts/src/arm/ea3250.dts
deleted file mode 100644
index a4a281fe82..0000000000
--- a/dts/src/arm/ea3250.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
-	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
-	compatible = "ea,ea3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-		button@21 {
-			label = "Interrupt Key";
-			linux,code = <103>;
-			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
-		};
-		key1 {
-			label = "KEY1";
-			linux,code = <1>;
-			gpios = <&pca9532 0 0>;
-		};
-		key2 {
-			label = "KEY2";
-			linux,code = <2>;
-			gpios = <&pca9532 1 0>;
-		};
-		key3 {
-			label = "KEY3";
-			linux,code = <3>;
-			gpios = <&pca9532 2 0>;
-		};
-		key4 {
-			label = "KEY4";
-			linux,code = <4>;
-			gpios = <&pca9532 3 0>;
-		};
-		joy0 {
-			label = "Joystick Key 0";
-			linux,code = <10>;
-			gpios = <&gpio 2 0 0>; /* P2.0 */
-		};
-		joy1 {
-			label = "Joystick Key 1";
-			linux,code = <11>;
-			gpios = <&gpio 2 1 0>; /* P2.1 */
-		};
-		joy2 {
-			label = "Joystick Key 2";
-			linux,code = <12>;
-			gpios = <&gpio 2 2 0>; /* P2.2 */
-		};
-		joy3 {
-			label = "Joystick Key 3";
-			linux,code = <13>;
-			gpios = <&gpio 2 3 0>; /* P2.3 */
-		};
-		joy4 {
-			label = "Joystick Key 4";
-			linux,code = <14>;
-			gpios = <&gpio 2 4 0>; /* P2.4 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* LEDs on OEM Board */
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio 2 10 1>; /* P2.10, active low */
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio 2 11 1>; /* P2.11, active low */
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio 2 12 1>; /* P2.12, active low */
-			default-state = "off";
-		};
-
-		/* LEDs on Base Board */
-
-		lede1 {
-			gpios = <&pca9532 8 0>;
-			default-state = "off";
-		};
-		lede2 {
-			gpios = <&pca9532 9 0>;
-			default-state = "off";
-		};
-		lede3 {
-			gpios = <&pca9532 10 0>;
-			default-state = "off";
-		};
-		lede4 {
-			gpios = <&pca9532 11 0>;
-			default-state = "off";
-		};
-		lede5 {
-			gpios = <&pca9532 12 0>;
-			default-state = "off";
-		};
-		lede6 {
-			gpios = <&pca9532 13 0>;
-			default-state = "off";
-		};
-		lede7 {
-			gpios = <&pca9532 14 0>;
-			default-state = "off";
-		};
-		lede8 {
-			gpios = <&pca9532 15 0>;
-			default-state = "off";
-		};
-	};
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
-	status = "okay";
-};
-
-&i2cusb {
-	clock-frequency = <100000>;
-
-	isp1301: usb-transceiver@2d {
-		compatible = "nxp,isp1301";
-		reg = <0x2d>;
-	};
-};