dts: update to v5.2-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 15 insertions, 11 deletions

diff --git a/dts/src/arm/vf610-zii-cfu1.dts b/dts/src/arm/vf610-zii-cfu1.dts
index 445c7dc306..9466913693 100644
--- a/dts/src/arm/vf610-zii-cfu1.dts
+++ b/dts/src/arm/vf610-zii-cfu1.dts
@@ -29,35 +29,30 @@
 			label = "zii:green:debug1";
 			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
-			max-brightness = <1>;
 		};
 
 		led-fail {
 			label = "zii:red:fail";
 			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 			default-state = "off";
-			max-brightness = <1>;
 		};
 
 		led-status {
 			label = "zii:green:status";
 			gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			max-brightness = <1>;
 		};
 
 		led-debug-a {
 			label = "zii:green:debug_a";
 			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			max-brightness = <1>;
 		};
 
 		led-debug-b {
 			label = "zii:green:debug_b";
 			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			max-brightness = <1>;
 		};
 	};
 
@@ -92,9 +87,14 @@
 	bus-num = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dspi1>;
-	status = "okay";
-
-	m25p128@0 {
+	/*
+	 * Some CFU1s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p128", "jedec,spi-nor";
@@ -212,7 +212,7 @@
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
 
-	pca9554@22 {
+	io-expander@22 {
 		compatible = "nxp,pca9554";
 		reg = <0x22>;
 		gpio-controller;
@@ -223,19 +223,23 @@
 		reg = <0x48>;
 	};
 
-	at24c04@52 {
+	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		label = "nvm";
 	};
 
-	at24c04@54 {
+	eeprom@54 {
 		compatible = "atmel,24c04";
 		reg = <0x54>;
 		label = "nameplate";
 	};
 };
 
+&snvsrtc {
+	status = "disabled";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0>;