dts: update to v5.7-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

15 files changed, 1240 insertions, 73 deletions

diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
index 6dfafa1c87..5fa9ca0191 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
@@ -158,6 +158,17 @@
 	 */
 };
 
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -170,6 +181,12 @@
 	};
 };
 
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
 #include "axp803.dtsi"
 
 &ac_power_supply {
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 3d894b2089..64b1c54f87 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -21,32 +21,17 @@
 		ethernet0 = &rtl8723cs;
 	};
 
-	vdd_bl: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "bl-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-		enable-active-high;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 0>;
 		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
 		default-brightness-level = <2>;
 		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-		power-supply = <&vdd_bl>;
+		power-supply = <&reg_vbklt>;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-
-		framebuffer-lcd {
-			panel-supply = <&reg_dc1sw>;
-			dvdd25-supply = <&reg_dldo2>;
-			dvdd12-supply = <&reg_fldo1>;
-		};
 	};
 
 	gpio_keys {
@@ -63,11 +48,34 @@
 		};
 	};
 
-	reg_vcc3v3: vcc3v3 {
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
@@ -77,12 +85,7 @@
 
 	speaker_amp: audio-amplifier {
 		compatible = "simple-audio-amplifier";
-		/*
-		 * TODO This is actually a fixed regulator controlled by
-		 * the GPIO line on the PMIC. This should be corrected
-		 * once GPIO support is added for this PMIC.
-		 */
-		VCC-supply = <&reg_ldo_io0>;
+		VCC-supply = <&reg_vcc5v0>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
 		sound-name-prefix = "Speaker Amp";
 	};
@@ -118,6 +121,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	phys = <&usbphy 0>;
 	phy-names = "usb";
@@ -128,11 +135,15 @@
 	status = "okay";
 };
 
+&mixer0 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	disable-wp;
 	bus-width = <4>;
 	status = "okay";
@@ -175,10 +186,61 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
 &pwm {
 	status = "okay";
 };
 
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -190,14 +252,6 @@
 	};
 };
 
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_i2c_pl89_pins>;
-	status = "okay";
-};
-
 #include "axp803.dtsi"
 
 &ac_power_supply {
@@ -209,9 +263,7 @@
 };
 
 &reg_aldo1 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-name = "vcc-csi";
+	regulator-name = "vcc-pe";
 };
 
 &reg_aldo2 {
@@ -274,12 +326,6 @@
 	regulator-name = "vcc-edp";
 };
 
-&reg_dldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avdd-csi";
-};
-
 &reg_dldo4 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -293,12 +339,6 @@
 	regulator-name = "cpvdd";
 };
 
-&reg_eldo3 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vdd-1v8-csi";
-};
-
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
@@ -312,17 +352,16 @@
 	regulator-name = "vdd-cpus";
 };
 
-&reg_ldo_io0 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-usb";
-	status = "okay";
-};
-
 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
 &simplefb_hdmi {
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
@@ -350,6 +389,19 @@
 			"MIC2", "Internal Microphone Right";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
@@ -361,7 +413,7 @@
 };
 
 &usbphy {
-	usb0_vbus-supply = <&reg_ldo_io0>;
-	usb1_vbus-supply = <&reg_ldo_io0>;
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000000..0c42272106
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000000..06a775c416
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000000..cefda145c3
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		green {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Accelerometer/gyroscope */
+	mpu6050@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000000..316e8a4439
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	hpvcc-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi
index 862b47dc9d..31143fe64d 100644
--- a/dts/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi
@@ -264,7 +264,7 @@
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
@@ -274,6 +274,18 @@
 				#reset-cells = <1>;
 			};
 
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
 			mixer0: mixer@100000 {
 				compatible = "allwinner,sun50i-a64-de2-mixer-0";
 				reg = <0x100000 0x100000>;
@@ -671,6 +683,11 @@
 				function = "i2c1";
 			};
 
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
 			/omit-if-no-ref/
 			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
@@ -958,12 +975,13 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-
 		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
@@ -1061,6 +1079,14 @@
 			status = "disabled";
 		};
 
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 112>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
 		csi: csi@1cb0000 {
 			compatible = "allwinner,sun50i-a64-csi";
 			reg = <0x01cb0000 0x1000>;
@@ -1106,6 +1132,20 @@
 			#phy-cells = <0>;
 		};
 
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
index 70b5f09984..7d7aad18f0 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -61,6 +61,7 @@
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -93,6 +94,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
@@ -168,6 +173,22 @@
 	status = "okay";
 };
 
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1100000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &spi0  {
 	status = "okay";
 
diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi
index 9893aa64dd..4462a68c06 100644
--- a/dts/src/arm64/allwinner/sun50i-h5.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi
@@ -38,8 +38,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
index df6d872c34..8f09d20935 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
@@ -32,6 +32,13 @@
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -275,6 +282,10 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &spdif {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
index c311eee52a..47f579610d 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
@@ -32,6 +32,13 @@
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -144,6 +151,15 @@
 	};
 };
 
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -276,6 +292,10 @@
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
index 83aab73688..fceb298bfd 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -7,4 +7,37 @@
 / {
 	model = "OrangePi One Plus";
 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
index 37f4c57597..9287976c4a 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
@@ -20,6 +20,25 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -45,6 +64,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -58,6 +81,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -197,6 +230,10 @@
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
index d1c2aa5b3a..b0642d8419 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
@@ -14,12 +14,20 @@
 	aliases {
 		ethernet0 = &emac;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -278,6 +286,28 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi
index 3329283e38..b9ab7d8fa8 100644
--- a/dts/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi
@@ -62,16 +62,8 @@
 		clock-output-names = "osc24M";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "ext_osc32k";
-	};
-
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -338,6 +330,31 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -504,6 +521,36 @@
 			#size-cells = <0>;
 		};
 
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@5020000 {
 			compatible = "allwinner,sun50i-h6-emac",
 				     "allwinner,sun50i-a64-emac";
@@ -800,7 +847,6 @@
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out", "iosc";
-			clocks = <&ext_osc32k>;
 			#clock-cells = <1>;
 		};