dts: update to v4.4-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 623 insertions, 15 deletions

diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi
index e3ee96036e..dd5158eb58 100644
--- a/dts/src/arm64/arm/juno-base.dtsi
+++ b/dts/src/arm64/arm/juno-base.dtsi
@@ -17,6 +17,18 @@
 		};
 	};
 
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mhu_lpri_rx",
+				  "mhu_hpri_rx";
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		reg = <0x0 0x2c010000 0 0x1000>,
@@ -44,6 +56,53 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-shmem@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-shmem@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: scpi_clocks@3 {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>, <4>;
+				clock-output-names = "pxlclk0", "pxlclk1";
+			};
+		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	/include/ "juno-clocks.dtsi"
 
 	dma@7ff00000 {
diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi
index 3c38668035..413f1b9ebc 100644
--- a/dts/src/arm64/arm/juno-motherboard.dtsi
+++ b/dts/src/arm64/arm/juno-motherboard.dtsi
@@ -103,6 +103,21 @@
 				};
 			};
 
+			flash@0,00000000 {
+				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				linux,part-probe = "afs";
+				reg = <0 0x00000000 0x04000000>;
+				bank-width = <4>;
+				/*
+				 * Unfortunately, accessing the flash disturbs
+				 * the CPU idle states (suspend) and CPU
+				 * hotplug of the platform. For this reason,
+				 * flash hardware access is disabled by default.
+				 */
+				status = "disabled";
+			};
+
 			ethernet@2,00000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x00000000 0x10000>;
diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts
index c62751153a..93bc3d7d51 100644
--- a/dts/src/arm64/arm/juno-r1.dts
+++ b/dts/src/arm64/arm/juno-r1.dts
@@ -34,12 +34,39 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		A57_1: cpu@1 {
@@ -48,6 +75,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		A53_0: cpu@100 {
@@ -56,6 +84,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_1: cpu@101 {
@@ -64,6 +93,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_2: cpu@102 {
@@ -72,6 +102,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_3: cpu@103 {
@@ -80,6 +111,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A57_L2: l2-cache0 {
@@ -91,17 +123,21 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&A57_0>,
-				     <&A57_1>,
-				     <&A53_0>,
+		interrupt-affinity = <&A53_0>,
 				     <&A53_1>,
 				     <&A53_2>,
 				     <&A53_3>;
@@ -109,6 +145,26 @@
 
 	#include "juno-base.dtsi"
 
+	pcie-controller@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+				<0 0 0 2 &gic 0 0 0 137 4>,
+				<0 0 0 3 &gic 0 0 0 138 4>,
+				<0 0 0 4 &gic 0 0 0 139 4>;
+		msi-parent = <&v2m_0>;
+	};
 };
 
 &memtimer {
diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts
index d7cbdd482a..53442b5ee4 100644
--- a/dts/src/arm64/arm/juno.dts
+++ b/dts/src/arm64/arm/juno.dts
@@ -34,12 +34,39 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		A57_1: cpu@1 {
@@ -48,6 +75,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		A53_0: cpu@100 {
@@ -56,6 +84,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_1: cpu@101 {
@@ -64,6 +93,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_2: cpu@102 {
@@ -72,6 +102,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A53_3: cpu@103 {
@@ -80,6 +111,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		A57_L2: l2-cache0 {
@@ -91,17 +123,21 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&A57_0>,
-				     <&A57_1>,
-				     <&A53_0>,
+		interrupt-affinity = <&A53_0>,
 				     <&A53_1>,
 				     <&A53_2>,
 				     <&A53_3>;
diff --git a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
index 5b1d018102..bb3c26d115 100644
--- a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -186,6 +186,6 @@
 				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 
-		/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 };
diff --git a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 0000000000..21b02874be
--- /dev/null
+++ b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,442 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+	motherboard {
+		model = "V2M-P1";
+		arm,hbi = <0x190>;
+		arm,vexpress,site = <0>;
+		arm,v2m-memory-map = "rs1";
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <4 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		psram@1,00000000 {
+			compatible = "arm,vexpress-psram", "mtd-ram";
+			reg = <1 0x00000000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		v2m_video_ram: vram@2,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <2 0x00000000 0x00800000>;
+		};
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&v2m_fixed_3v3>;
+			vddvario-supply = <&v2m_fixed_3v3>;
+		};
+
+		usb@2,03000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <2 0x03000000 0x20000>;
+			interrupts = <16>;
+			port1-otg;
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			v2m_sysctl: sysctl@020000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+			};
+
+			/* PCI-E I2C bus */
+			v2m_i2c_pcie: i2c@030000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x030000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pcie-switch@60 {
+					compatible = "idt,89hpes32h8";
+					reg = <0x60>;
+				};
+			};
+
+			aaci@040000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x040000 0x1000>;
+				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@050000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x050000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@060000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x060000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@070000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x070000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f0000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f0000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@110000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x110000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@120000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x120000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			/* DVI I2C bus */
+			v2m_i2c_dvi: i2c@160000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x160000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dvi-transmitter@39 {
+					compatible = "sil,sii9022-tpi", "sil,sii9022";
+					reg = <0x39>;
+				};
+
+				dvi-transmitter@60 {
+					compatible = "sil,sii9022-cpi", "sil,sii9022";
+					reg = <0x60>;
+				};
+			};
+
+			rtc@170000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x170000 0x1000>;
+				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			compact-flash@1a0000 {
+				compatible = "arm,vexpress-cf", "ata-generic";
+				reg = <0x1a0000 0x100
+				       0x1a0100 0xf00>;
+				reg-shift = <2>;
+			};
+
+			clcd@1f0000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f0000 0x1000>;
+				interrupt-names = "combined";
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
+				memory-region = <&v2m_video_ram>;
+				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+
+				port {
+					v2m_clcd_pads: endpoint {
+						remote-endpoint = <&v2m_clcd_panel>;
+						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+					};
+				};
+
+				panel {
+					compatible = "panel-dpi";
+
+					port {
+						v2m_clcd_panel: endpoint {
+							remote-endpoint = <&v2m_clcd_pads>;
+						};
+					};
+
+					panel-timing {
+						clock-frequency = <25175000>;
+						hactive = <640>;
+						hback-porch = <40>;
+						hfront-porch = <24>;
+						hsync-len = <96>;
+						vactive = <480>;
+						vback-porch = <32>;
+						vfront-porch = <11>;
+						vsync-len = <2>;
+					};
+				};
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 65000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+				label = "VIO";
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};