dts: update to v4.13-rc2

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

14 files changed, 525 insertions, 197 deletions

diff --git a/dts/src/arm64/marvell/armada-3720-db.dts b/dts/src/arm64/marvell/armada-3720-db.dts
index a89855f570..9df0f06ce6 100644
--- a/dts/src/arm64/marvell/armada-3720-db.dts
+++ b/dts/src/arm64/marvell/armada-3720-db.dts
@@ -42,6 +42,10 @@
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
  */
 
 /dts-v1/;
@@ -76,6 +80,36 @@
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&exp_usb3_vbus>;
 	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+	status = "okay";
 };
 
 &i2c0 {
@@ -108,11 +142,46 @@
 	};
 };
 
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+	status = "okay";
+};
+
 /* CON3 */
 &sata {
 	status = "okay";
 };
 
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -145,60 +214,23 @@
 	};
 };
 
-/* Exported on the micro USB connector CON32 through an FTDI */
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
-&sdhci0 {
-	non-removable;
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,pad-type = "fixed-1-8v";
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
 	status = "okay";
 };
 
-/* CON31 */
+/* CON29(V2.0)/CON31(V1.4) */
 &usb3 {
 	status = "okay";
 	usb-phy = <&usb3_phy>;
 };
-
-/* CON17 (PCIe) / CON12 (mini-PCIe) */
-&pcie0 {
-	status = "okay";
-};
-
-/* CON27 */
-&usb2 {
-	status = "okay";
-};
-
-
-&mdio {
-	status = "okay";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii-id";
-	phy = <&phy0>;
-	status = "okay";
-};
-
-&eth1 {
-	phy-mode = "sgmii";
-	phy = <&phy1>;
-	status = "okay";
-};
diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi
index 4d495ec392..dbcc3d4e2e 100644
--- a/dts/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/src/arm64/marvell/armada-37xx.dtsi
@@ -75,14 +75,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	soc {
@@ -163,7 +159,7 @@
 
 			pinctrl_nb: pinctrl@13800 {
 				compatible = "marvell,armada3710-nb-pinctrl",
-				"syscon", "simple-mfd";
+					     "syscon", "simple-mfd";
 				reg = <0x13800 0x100>, <0x13C00 0x20>;
 				gpionb: gpio {
 					#gpio-cells = <2>;
@@ -219,7 +215,7 @@
 
 			pinctrl_sb: pinctrl@18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
-				"syscon", "simple-mfd";
+					     "syscon", "simple-mfd";
 				reg = <0x18800 0x100>, <0x18C00 0x20>;
 				gpiosb: gpio {
 					#gpio-cells = <2>;
@@ -281,8 +277,8 @@
 
 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
+				reg = <0x60900 0x100>,
+				      <0x60b00 0x100>;
 
 				xor10 {
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -292,11 +288,22 @@
 				};
 			};
 
+			sdhci1: sdhci@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300>,
+				      <0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sdhci0: sdhci@d8000 {
 				compatible = "marvell,armada-3700-sdhci",
-				"marvell,sdhci-xenon";
-				reg = <0xd8000 0x300
-				       0x17808 0x4>;
+					     "marvell,sdhci-xenon";
+				reg = <0xd8000 0x300>,
+				      <0x17808 0x4>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&nb_periph_clk 0>;
 				clock-names = "core";
diff --git a/dts/src/arm64/marvell/armada-7020.dtsi b/dts/src/arm64/marvell/armada-7020.dtsi
index 975e733027..4ab012991d 100644
--- a/dts/src/arm64/marvell/armada-7020.dtsi
+++ b/dts/src/arm64/marvell/armada-7020.dtsi
@@ -46,7 +46,7 @@
  */
 
 #include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
 
 / {
 	model = "Marvell Armada 7020";
diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts
index 12442329b8..92c761c380 100644
--- a/dts/src/arm64/marvell/armada-7040-db.dts
+++ b/dts/src/arm64/marvell/armada-7040-db.dts
@@ -162,6 +162,8 @@
 };
 
 &cpm_mdio {
+	status = "okay";
+
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
@@ -185,7 +187,3 @@
 	phy = <&phy1>;
 	phy-mode = "rgmii-id";
 };
-
-&cpm_crypto {
-	status = "okay";
-};
diff --git a/dts/src/arm64/marvell/armada-7040.dtsi b/dts/src/arm64/marvell/armada-7040.dtsi
index 78d995d627..cbe460b8fc 100644
--- a/dts/src/arm64/marvell/armada-7040.dtsi
+++ b/dts/src/arm64/marvell/armada-7040.dtsi
@@ -46,7 +46,7 @@
  */
 
 #include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
 
 / {
 	model = "Marvell Armada 7040";
diff --git a/dts/src/arm64/marvell/armada-70x0.dtsi b/dts/src/arm64/marvell/armada-70x0.dtsi
new file mode 100644
index 0000000000..860b6ae9dc
--- /dev/null
+++ b/dts/src/arm64/marvell/armada-70x0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+#include "armada-cp110-master.dtsi"
+
+/ {
+	aliases {
+		gpio1 = &cpm_gpio1;
+		gpio2 = &cpm_gpio2;
+	};
+};
+
+&cpm_gpio1 {
+	status = "okay";
+};
+
+&cpm_gpio2 {
+	status = "okay";
+};
+
+&cpm_syscon0 {
+	cpm_pinctrl: pinctrl {
+		compatible = "marvell,armada-7k-pinctrl";
+	};
+};
diff --git a/dts/src/arm64/marvell/armada-8020.dtsi b/dts/src/arm64/marvell/armada-8020.dtsi
index 7c08f1f28d..0ba0bc9425 100644
--- a/dts/src/arm64/marvell/armada-8020.dtsi
+++ b/dts/src/arm64/marvell/armada-8020.dtsi
@@ -46,8 +46,7 @@
  */
 
 #include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts
index dc0d084005..1e8f7242ed 100644
--- a/dts/src/arm64/marvell/armada-8040-db.dts
+++ b/dts/src/arm64/marvell/armada-8040-db.dts
@@ -125,6 +125,8 @@
 };
 
 &cpm_mdio {
+	status = "okay";
+
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
@@ -140,10 +142,6 @@
 	phy-mode = "rgmii-id";
 };
 
-&cpm_crypto {
-	status = "okay";
-};
-
 /* CON5 on CP1 expansion */
 &cps_pcie2 {
 	status = "okay";
@@ -169,6 +167,24 @@
 	status = "okay";
 };
 
+&cps_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cps_ethernet {
+	status = "okay";
+};
+
+&cps_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
 &ap_sdhci0 {
 	status = "okay";
 	bus-width = <4>;
diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dts b/dts/src/arm64/marvell/armada-8040-mcbin.dts
index f7bb0cc031..4968e731de 100644
--- a/dts/src/arm64/marvell/armada-8040-mcbin.dts
+++ b/dts/src/arm64/marvell/armada-8040-mcbin.dts
@@ -95,16 +95,47 @@
 	status = "okay";
 };
 
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
 &cpm_i2c0 {
 	clock-frequency = <100000>;
 	status = "okay";
 };
 
+&cpm_mdio {
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &cpm_sata0 {
 	/* CPM Lane 0 - U29 */
 	status = "okay";
 };
 
+&cpm_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
 &cpm_usb3_0 {
 	/* J38? - USB2.0 only */
 	status = "okay";
@@ -115,6 +146,17 @@
 	status = "okay";
 };
 
+&cps_ethernet {
+	status = "okay";
+};
+
+&cps_eth1 {
+	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+	status = "okay";
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+};
+
 &cps_sata0 {
 	/* CPS Lane 1 - U32 */
 	/* CPS Lane 3 - U31 */
diff --git a/dts/src/arm64/marvell/armada-8040.dtsi b/dts/src/arm64/marvell/armada-8040.dtsi
index 33813a75bc..60fe84f5cb 100644
--- a/dts/src/arm64/marvell/armada-8040.dtsi
+++ b/dts/src/arm64/marvell/armada-8040.dtsi
@@ -46,8 +46,7 @@
  */
 
 #include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
diff --git a/dts/src/arm64/marvell/armada-80x0.dtsi b/dts/src/arm64/marvell/armada-80x0.dtsi
new file mode 100644
index 0000000000..666ebe96ba
--- /dev/null
+++ b/dts/src/arm64/marvell/armada-80x0.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+#include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
+
+/ {
+	aliases {
+		gpio1 = &cps_gpio1;
+		gpio2 = &cpm_gpio2;
+	};
+};
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cps_gpio1 {
+	status = "okay";
+};
+
+&cpm_gpio2 {
+	status = "okay";
+};
+
+&cpm_syscon0 {
+	cpm_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cpm-pinctrl";
+	};
+};
+
+&cps_syscon0 {
+	cps_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cps-pinctrl";
+	};
+};
diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi
index fe41bf9c30..1eb1f1e9aa 100644
--- a/dts/src/arm64/marvell/armada-ap806.dtsi
+++ b/dts/src/arm64/marvell/armada-ap806.dtsi
@@ -57,6 +57,7 @@
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
+		gpio0 = &ap_gpio;
 	};
 
 	psci {
@@ -146,6 +147,13 @@
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
+			gicp: gicp@3f0040 {
+				compatible = "marvell,ap806-gicp";
+				reg = <0x3f0040 0x10>;
+				marvell,spi-ranges = <64 64>, <288 64>;
+				msi-controller;
+			};
+
 			pic: interrupt-controller@3f0100 {
 				compatible = "marvell,armada-8k-pic";
 				reg = <0x3f0100 0x10>;
@@ -159,6 +167,7 @@
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -167,6 +176,7 @@
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -175,6 +185,7 @@
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -183,6 +194,7 @@
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -193,7 +205,7 @@
 				#size-cells = <0>;
 				cell-index = <0>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				status = "disabled";
 			};
 
@@ -204,7 +216,7 @@
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-ms = <1000>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				status = "disabled";
 			};
 
@@ -214,7 +226,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				status = "disabled";
 			};
 
@@ -224,7 +236,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				status = "disabled";
 
 			};
@@ -234,21 +246,33 @@
 				reg = <0x6e0000 0x300>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "core";
-				clocks = <&ap_syscon 4>;
+				clocks = <&ap_clk 4>;
 				dma-coherent;
 				marvell,xenon-phy-slow-mode;
 				status = "disabled";
 			};
 
 			ap_syscon: system-controller@6f4000 {
-				compatible = "marvell,ap806-system-controller",
-					     "syscon";
-				#clock-cells = <1>;
-				clock-output-names = "ap-cpu-cluster-0",
-						     "ap-cpu-cluster-1",
-						     "ap-fixed", "ap-mss",
-						     "ap-emmc";
+				compatible = "syscon", "simple-mfd";
 				reg = <0x6f4000 0x1000>;
+
+				ap_clk: clock {
+					compatible = "marvell,ap806-clock";
+					#clock-cells = <1>;
+				};
+
+				ap_pinctrl: pinctrl {
+					compatible = "marvell,ap806-pinctrl";
+				};
+
+				ap_gpio: gpio {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x1040>;
+					ngpios = <19>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ap_pinctrl 0 0 19>;
+				};
 			};
 		};
 	};
diff --git a/dts/src/arm64/marvell/armada-cp110-master.dtsi b/dts/src/arm64/marvell/armada-cp110-master.dtsi
index b4bc42ece7..726528ce54 100644
--- a/dts/src/arm64/marvell/armada-cp110-master.dtsi
+++ b/dts/src/arm64/marvell/armada-cp110-master.dtsi
@@ -44,45 +44,46 @@
  * Device Tree file for Marvell Armada CP110 Master.
  */
 
+#define ICU_GRP_NSR 0x0
+
 / {
 	cp110-master {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		interrupt-parent = <&cpm_icu>;
 		ranges;
 
 		config-space@f2000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
 			ranges = <0x0 0x0 0xf2000000 0x2000000>;
 
 			cpm_ethernet: ethernet@0 {
 				compatible = "marvell,armada-7k-pp22";
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
-				clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+				clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
 				status = "disabled";
 				dma-coherent;
 
 				cpm_eth0: eth0 {
-					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cpm_eth1: eth1 {
-					interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cpm_eth2: eth2 {
-					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";
@@ -94,41 +95,70 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x12a200 0x10>;
+				clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>;
+				status = "disabled";
+			};
+
+			cpm_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+				status = "disabled";
+			};
+
+			cpm_icu: interrupt-controller@1e0000 {
+				compatible = "marvell,cp110-icu";
+				reg = <0x1e0000 0x10>;
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				msi-parent = <&gicp>;
 			};
 
 			cpm_syscon0: system-controller@440000 {
-				compatible = "marvell,cp110-system-controller0",
-					     "syscon";
+				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;
-				#clock-cells = <2>;
-				core-clock-output-names =
-					"cpm-apll", "cpm-ppv2-core", "cpm-eip",
-					"cpm-core", "cpm-nand-core";
-				gate-clock-output-names =
-					"cpm-audio", "cpm-communit", "cpm-nand",
-					"cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
-					"cpm-mg-core", "cpm-xor1", "cpm-xor0",
-					"cpm-gop-dp", "none", "cpm-pcie_x10",
-					"cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
-					"cpm-sata", "cpm-sata-usb", "cpm-main",
-					"cpm-sd-mmc-gop", "none", "none",
-					"cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
-					"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+
+				cpm_clk: clock {
+					compatible = "marvell,cp110-clock";
+					#clock-cells = <2>;
+				};
+
+				cpm_gpio1: gpio@100 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x100>;
+					ngpios = <32>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&cpm_pinctrl 0 0 32>;
+					status = "disabled";
+
+				};
+
+				cpm_gpio2: gpio@140 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x140>;
+					ngpios = <31>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&cpm_pinctrl 0 32 31>;
+					status = "disabled";
+				};
 			};
 
 			cpm_rtc: rtc@284000 {
 				compatible = "marvell,armada-8k-rtc";
 				reg = <0x284000 0x20>, <0x284080 0x24>;
 				reg-names = "rtc", "rtc-soc";
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			cpm_sata0: sata@540000 {
 				compatible = "marvell,armada-8k-ahci",
 					     "generic-ahci";
 				reg = <0x540000 0x30000>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 15>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 15>;
 				status = "disabled";
 			};
 
@@ -137,8 +167,8 @@
 					     "generic-xhci";
 				reg = <0x500000 0x4000>;
 				dma-coherent;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 22>;
+				interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 22>;
 				status = "disabled";
 			};
 
@@ -147,8 +177,8 @@
 					     "generic-xhci";
 				reg = <0x510000 0x4000>;
 				dma-coherent;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 23>;
+				interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 23>;
 				status = "disabled";
 			};
 
@@ -158,7 +188,7 @@
 				      <0x6b0000 0x1000>;
 				dma-coherent;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&cpm_syscon0 1 8>;
+				clocks = <&cpm_clk 1 8>;
 			};
 
 			cpm_xor1: xor@6c0000 {
@@ -167,7 +197,7 @@
 				      <0x6d0000 0x1000>;
 				dma-coherent;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&cpm_syscon0 1 7>;
+				clocks = <&cpm_clk 1 7>;
 			};
 
 			cpm_spi0: spi@700600 {
@@ -176,7 +206,7 @@
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
 				cell-index = <1>;
-				clocks = <&cpm_syscon0 1 21>;
+				clocks = <&cpm_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -186,7 +216,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <2>;
-				clocks = <&cpm_syscon0 1 21>;
+				clocks = <&cpm_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -195,8 +225,8 @@
 				reg = <0x701000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 21>;
+				interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -205,25 +235,25 @@
 				reg = <0x701100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 21>;
+				interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 21>;
 				status = "disabled";
 			};
 
 			cpm_trng: trng@760000 {
 				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
 				reg = <0x760000 0x7d>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_syscon0 1 25>;
+				interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 25>;
 				status = "okay";
 			};
 
 			cpm_sdhci0: sdhci@780000 {
 				compatible = "marvell,armada-cp110-sdhci";
 				reg = <0x780000 0x300>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "core";
-				clocks = <&cpm_syscon0 1 4>;
+				clocks = <&cpm_clk 1 4>;
 				dma-coherent;
 				status = "disabled";
 			};
@@ -231,16 +261,15 @@
 			cpm_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "mem", "ring0", "ring1",
 				"ring2", "ring3", "eip";
-				clocks = <&cpm_syscon0 1 26>;
-				status = "disabled";
+				clocks = <&cpm_clk 1 26>;
 			};
 		};
 
@@ -263,10 +292,10 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
-			clocks = <&cpm_syscon0 1 13>;
+			clocks = <&cpm_clk 1 13>;
 			status = "disabled";
 		};
 
@@ -289,11 +318,11 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
-			clocks = <&cpm_syscon0 1 11>;
+			clocks = <&cpm_clk 1 11>;
 			status = "disabled";
 		};
 
@@ -316,11 +345,11 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
-			clocks = <&cpm_syscon0 1 12>;
+			clocks = <&cpm_clk 1 12>;
 			status = "disabled";
 		};
 	};
diff --git a/dts/src/arm64/marvell/armada-cp110-slave.dtsi b/dts/src/arm64/marvell/armada-cp110-slave.dtsi
index 6e2058847d..95f8e5f607 100644
--- a/dts/src/arm64/marvell/armada-cp110-slave.dtsi
+++ b/dts/src/arm64/marvell/armada-cp110-slave.dtsi
@@ -44,19 +44,20 @@
  * Device Tree file for Marvell Armada CP110 Slave.
  */
 
+#define ICU_GRP_NSR 0x0
+
 / {
 	cp110-slave {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		interrupt-parent = <&cps_icu>;
 		ranges;
 
 		config-space@f4000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
 			ranges = <0x0 0x0 0xf4000000 0x2000000>;
 
 			cps_rtc: rtc@284000 {
@@ -69,27 +70,27 @@
 			cps_ethernet: ethernet@0 {
 				compatible = "marvell,armada-7k-pp22";
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
-				clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+				clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
 				status = "disabled";
 				dma-coherent;
 
 				cps_eth0: eth0 {
-					interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cps_eth1: eth1 {
-					interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cps_eth2: eth2 {
-					interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";
@@ -101,34 +102,64 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x12a200 0x10>;
+				clocks = <&cps_clk 1 9>, <&cps_clk 1 5>;
+				status = "disabled";
+			};
+
+			cps_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+				status = "disabled";
+			};
+
+			cps_icu: interrupt-controller@1e0000 {
+				compatible = "marvell,cp110-icu";
+				reg = <0x1e0000 0x10>;
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				msi-parent = <&gicp>;
 			};
 
 			cps_syscon0: system-controller@440000 {
-				compatible = "marvell,cp110-system-controller0",
-					     "syscon";
+				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;
-				#clock-cells = <2>;
-				core-clock-output-names =
-					"cps-apll", "cps-ppv2-core", "cps-eip",
-					"cps-core", "cps-nand-core";
-				gate-clock-output-names =
-					"cps-audio", "cps-communit", "cps-nand",
-					"cps-ppv2", "cps-sdio", "cps-mg-domain",
-					"cps-mg-core", "cps-xor1", "cps-xor0",
-					"cps-gop-dp", "none", "cps-pcie_x10",
-					"cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
-					"cps-sata", "cps-sata-usb", "cps-main",
-					"cps-sd-mmc-gop", "none", "none",
-					"cps-slow-io", "cps-usb3h0", "cps-usb3h1",
-					"cps-usb3dev", "cps-eip150", "cps-eip197";
+
+				cps_clk: clock {
+					compatible = "marvell,cp110-clock";
+					#clock-cells = <2>;
+				};
+
+				cps_gpio1: gpio@100 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x100>;
+					ngpios = <32>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&cps_pinctrl 0 0 32>;
+					status = "disabled";
+
+				};
+
+				cps_gpio2: gpio@140 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x140>;
+					ngpios = <31>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&cps_pinctrl 0 32 31>;
+					status = "disabled";
+				};
+
 			};
 
 			cps_sata0: sata@540000 {
 				compatible = "marvell,armada-8k-ahci",
 					     "generic-ahci";
 				reg = <0x540000 0x30000>;
-				interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 15>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 15>;
 				status = "disabled";
 			};
 
@@ -137,8 +168,8 @@
 					     "generic-xhci";
 				reg = <0x500000 0x4000>;
 				dma-coherent;
-				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 22>;
+				interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 22>;
 				status = "disabled";
 			};
 
@@ -147,8 +178,8 @@
 					     "generic-xhci";
 				reg = <0x510000 0x4000>;
 				dma-coherent;
-				interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 23>;
+				interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 23>;
 				status = "disabled";
 			};
 
@@ -158,7 +189,7 @@
 				      <0x6b0000 0x1000>;
 				dma-coherent;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&cps_syscon0 1 8>;
+				clocks = <&cps_clk 1 8>;
 			};
 
 			cps_xor1: xor@6c0000 {
@@ -167,7 +198,7 @@
 				      <0x6d0000 0x1000>;
 				dma-coherent;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&cps_syscon0 1 7>;
+				clocks = <&cps_clk 1 7>;
 			};
 
 			cps_spi0: spi@700600 {
@@ -176,7 +207,7 @@
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
 				cell-index = <3>;
-				clocks = <&cps_syscon0 1 21>;
+				clocks = <&cps_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -186,7 +217,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				cell-index = <4>;
-				clocks = <&cps_syscon0 1 21>;
+				clocks = <&cps_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -195,8 +226,8 @@
 				reg = <0x701000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 21>;
+				interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 21>;
 				status = "disabled";
 			};
 
@@ -205,31 +236,38 @@
 				reg = <0x701100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 21>;
+				interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 21>;
 				status = "disabled";
 			};
 
 			cps_trng: trng@760000 {
 				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
 				reg = <0x760000 0x7d>;
-				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_syscon0 1 25>;
+				interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 25>;
 				status = "okay";
 			};
 
 			cps_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "mem", "ring0", "ring1",
 						  "ring2", "ring3", "eip";
-				clocks = <&cps_syscon0 1 26>;
+				clocks = <&cps_clk 1 26>;
+				/*
+				 * The cryptographic engine found on the cp110
+				 * master is enabled by default at the SoC
+				 * level. Because it is not possible as of now
+				 * to enable two cryptographic engines in
+				 * parallel, disable this one by default.
+				 */
 				status = "disabled";
 			};
 		};
@@ -253,10 +291,10 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
-			clocks = <&cps_syscon0 1 13>;
+			clocks = <&cps_clk 1 13>;
 			status = "disabled";
 		};
 
@@ -279,11 +317,11 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
-			clocks = <&cps_syscon0 1 11>;
+			clocks = <&cps_clk 1 11>;
 			status = "disabled";
 		};
 
@@ -306,11 +344,11 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
-			clocks = <&cps_syscon0 1 12>;
+			clocks = <&cps_clk 1 12>;
 			status = "disabled";
 		};
 	};