dts: update to v4.9-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 120 insertions, 0 deletions

diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts
index 431266a48e..c2becb603e 100644
--- a/dts/src/arm64/nvidia/tegra210-smaug.dts
+++ b/dts/src/arm64/nvidia/tegra210-smaug.dts
@@ -27,6 +27,12 @@
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1556,6 +1562,46 @@
 		};
 	};
 
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
@@ -1568,12 +1614,81 @@
 		status = "okay";
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
 	sdhci@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma@702e2000 {
+			status = "okay";
+		};
+
+		agic@702f9000 {
+			status = "okay";
+		};
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1646,6 +1761,11 @@
 		};
 	};
 
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";