dts: update to v4.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 590 insertions, 18 deletions

diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi
index 1d63e6b879..33a3297eb2 100644
--- a/dts/src/arm64/qcom/apq8016-sbc.dtsi
+++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi
@@ -19,6 +19,30 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
@@ -47,6 +71,132 @@
 	};
 
 	soc {
+		pinctrl@1000000 {
+			gpio-line-names =
+				"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+				"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+				"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+				"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+				"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+				"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+				"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+				"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+				"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+				"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+				"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+				"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+				"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+				"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+				"[I2C3_SDA]", /* HSEC pin 38 */
+				"[I2C3_SCL]", /* HSEC pin 36 */
+				"[SPI0_MOSI]", /* LSEC pin 14 */
+				"[SPI0_MISO]", /* LSEC pin 10 */
+				"[SPI0_CS_N]", /* LSEC pin 12 */
+				"[SPI0_CLK]", /* LSEC pin 8 */
+				"HDMI_HPD_N", /* GPIO 20 */
+				"USR_LED_1_CTRL",
+				"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+				"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+				"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+				"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+				"[CSI0_MCLK]", /* HSEC pin 15 */
+				"[CSI1_MCLK]", /* HSEC pin 17 */
+				"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+				"[I2C2_SDA]", /* HSEC pin 34 */
+				"[I2C2_SCL]", /* HSEC pin 32 */
+				"DSI2HDMI_INT_N",
+				"DSI_SW_SEL_APQ",
+				"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+				"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+				"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+				"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+				"FORCED_USB_BOOT",
+				"SD_CARD_DET_N",
+				"[WCSS_BT_SSBI]",
+				"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+				"[WCSS_WLAN_DATA_1]",
+				"[WCSS_WLAN_DATA_0]",
+				"[WCSS_WLAN_SET]",
+				"[WCSS_WLAN_CLK]",
+				"[WCSS_FM_SSBI]",
+				"[WCSS_FM_SDI]",
+				"[WCSS_BT_DAT_CTL]",
+				"[WCSS_BT_DAT_STB]",
+				"NC",
+				"NC", /* GPIO 50 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 60 */
+				"NC",
+				"NC",
+				"[CDC_PDM0_CLK]",
+				"[CDC_PDM0_SYNC]",
+				"[CDC_PDM0_TX0]",
+				"[CDC_PDM0_RX0]",
+				"[CDC_PDM0_RX1]",
+				"[CDC_PDM0_RX2]",
+				"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+				"NC", /* GPIO 70 */
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 74 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"BOOT_CONFIG_0", /* GPIO 80 */
+				"BOOT_CONFIG_1",
+				"BOOT_CONFIG_2",
+				"BOOT_CONFIG_3",
+				"NC",
+				"NC",
+				"BOOT_CONFIG_5",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 90 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 100 */
+				"NC",
+				"NC",
+				"NC",
+				"SSBI_GPS",
+				"NC",
+				"NC",
+				"KEY_VOLP_N",
+				"NC",
+				"NC",
+				"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+				"NC",
+				"NC",
+				"[LS_EXP_MI2S_SCK]",
+				"[LS_EXP_MI2S_DATA0]",
+				"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+				"NC",
+				"[DSI2HDMI_MI2S_WS]",
+				"[DSI2HDMI_MI2S_SCK]",
+				"[DSI2HDMI_MI2S_DATA0]",
+				"USR_LED_2_CTRL", /* GPIO 120 */
+				"SB_HS_ID";
+		};
+
 		dma@7884000 {
 			status = "okay";
 		};
@@ -192,7 +342,7 @@
 			};
 		};
 
-		sdhci@07824000 {
+		sdhci@7824000 {
 			vmmc-supply = <&pm8916_l8>;
 			vqmmc-supply = <&pm8916_l5>;
 
@@ -202,7 +352,7 @@
 			status = "okay";
 		};
 
-		sdhci@07864000 {
+		sdhci@7864000 {
 			vmmc-supply = <&pm8916_l11>;
 			vqmmc-supply = <&pm8916_l12>;
 
@@ -232,7 +382,7 @@
 			};
 		};
 
-		lpass@07708000 {
+		lpass@7708000 {
 			status = "okay";
 		};
 
@@ -329,6 +479,25 @@
                         };
                 };
 
+		spmi@200f000 {
+			pm8916@0 {
+				gpios@c000 {
+					gpio-line-names =
+						"USR_LED_3_CTRL",
+						"USR_LED_4_CTRL",
+						"USB_HUB_RESET_N_PM",
+						"USB_SW_SEL_PM";
+				};
+				mpps@a000 {
+					gpio-line-names =
+						"VDD_PX_BIAS",
+						"WLAN_LED_CTRL",
+						"BT_LED_CTRL",
+						"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+				};
+			};
+		};
+
 		wcnss@a21b000 {
 			status = "okay";
 		};
@@ -379,6 +548,8 @@
         status = "okay";
         clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
         clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
 &smd_rpm_regulators {
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi
index 789f3e8732..492a011f14 100644
--- a/dts/src/arm64/qcom/apq8096-db820c.dtsi
+++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi
@@ -51,31 +51,31 @@
 			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
 		};
 
-		i2c@07577000 {
+		i2c@7577000 {
 		/* On Low speed expansion */
 			label = "LS-I2C0";
 			status = "okay";
 		};
 
-		i2c@075b6000 {
+		i2c@75b6000 {
 		/* On Low speed expansion */
 			label = "LS-I2C1";
 			status = "okay";
 		};
 
-		spi@07575000 {
+		spi@7575000 {
 		/* On Low speed expansion */
 			label = "LS-SPI0";
 			status = "okay";
 		};
 
-		i2c@075b5000 {
+		i2c@75b5000 {
 		/* On High speed expansion */
 			label = "HS-I2C2";
 			status = "okay";
 		};
 
-		spi@075ba000{
+		spi@75ba000{
 		/* On High speed expansion */
 			label = "HS-SPI1";
 			status = "okay";
@@ -138,6 +138,22 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb2_vbus_det_gpio>;
 		};
+
+		agnoc@0 {
+			qcom,pcie@00600000 {
+				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+			};
+
+			qcom,pcie@00608000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+			};
+
+			qcom,pcie@00610000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+			};
+		};
 	};
 
 
@@ -173,9 +189,15 @@
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 				};
+
+				/**
+				 * 1.8v required on LS expansion
+				 * for mezzanine boards
+				 */
 				s4 {
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 				};
 				s5 {
 					regulator-min-microvolt = <2150000>;
diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi
index dc3817593e..6b2127a6ce 100644
--- a/dts/src/arm64/qcom/msm8916.dtsi
+++ b/dts/src/arm64/qcom/msm8916.dtsi
@@ -69,8 +69,11 @@
 		};
 
 		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x86700000 0x0 0xe0000>;
 			no-map;
+
+			qcom,client-id = <1>;
 		};
 
 		rfsa@867e00000 {
@@ -257,6 +260,8 @@
 			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
 		};
 	};
 
@@ -495,7 +500,7 @@
 			status = "disabled";
 		};
 
-		lpass: lpass@07708000 {
+		lpass: lpass@7708000 {
 			status = "disabled";
 			compatible = "qcom,lpass-cpu-apq8016";
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -530,7 +535,7 @@
 			#sound-dai-cells = <1>;
                 };
 
-		sdhc_1: sdhci@07824000 {
+		sdhc_1: sdhci@7824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
@@ -547,7 +552,7 @@
 			status = "disabled";
 		};
 
-		sdhc_2: sdhci@07864000 {
+		sdhc_2: sdhci@7864000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
 			reg-names = "hc_mem", "core_mem";
@@ -814,7 +819,7 @@
 
 			mdp: mdp@1a01000 {
 				compatible = "qcom,mdp5";
-				reg = <0x1a01000 0x90000>;
+				reg = <0x1a01000 0x89000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
diff --git a/dts/src/arm64/qcom/msm8996-pins.dtsi b/dts/src/arm64/qcom/msm8996-pins.dtsi
index 6599404348..c5c42e94f3 100644
--- a/dts/src/arm64/qcom/msm8996-pins.dtsi
+++ b/dts/src/arm64/qcom/msm8996-pins.dtsi
@@ -300,4 +300,199 @@
 			drive-strength = <2>;	/* 2 MA */
 		};
 	};
+
+	pcie0_clkreq_default: pcie0_clkreq_default {
+		mux {
+			pins = "gpio36";
+			function = "pci_e0";
+		};
+
+		config {
+			pins = "gpio36";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_perst_default: pcie0_perst_default {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie0_wake_default: pcie0_wake_default {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_clkreq_sleep: pcie0_clkreq_sleep {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie0_wake_sleep: pcie0_wake_sleep {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie1_clkreq_default: pcie1_clkreq_default {
+		mux {
+			pins = "gpio131";
+			function = "pci_e1";
+		};
+
+		config {
+			pins = "gpio131";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_perst_default: pcie1_perst_default {
+		mux {
+			pins = "gpio130";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio130";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie1_wake_default: pcie1_wake_default {
+		mux {
+			pins = "gpio132";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio132";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie1_clkreq_sleep: pcie1_clkreq_sleep {
+		mux {
+			pins = "gpio131";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio131";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie1_wake_sleep: pcie1_wake_sleep {
+		mux {
+			pins = "gpio132";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio132";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie2_clkreq_default: pcie2_clkreq_default {
+		mux {
+			pins = "gpio115";
+			function = "pci_e2";
+		};
+
+		config {
+			pins = "gpio115";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie2_perst_default: pcie2_perst_default {
+		mux {
+			pins = "gpio114";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio114";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie2_wake_default: pcie2_wake_default {
+		mux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie2_clkreq_sleep: pcie2_clkreq_sleep {
+		mux {
+			pins = "gpio115";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio115";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie2_wake_sleep: pcie2_wake_sleep {
+		mux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi
index 887b61c872..4b2afcc4fd 100644
--- a/dts/src/arm64/qcom/msm8996.dtsi
+++ b/dts/src/arm64/qcom/msm8996.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -261,6 +262,8 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8996";
+
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
 	};
 
@@ -289,6 +292,11 @@
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
+			rpmcc: qcom,rpmcc {
+				compatible = "qcom,rpmcc-msm8996";
+				#clock-cells = <1>;
+			};
+
 			pm8994-regulators {
 				compatible = "qcom,rpm-pm8994-regulators";
 
@@ -358,6 +366,11 @@
 			reg = <0x740000 0x20000>;
 		};
 
+		tcsr: syscon@7a0000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x7a0000 0x18000>;
+		};
+
 		intc: interrupt-controller@9bc0000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -395,7 +408,7 @@
 			#clock-cells = <1>;
 		};
 
-		blsp1_spi0: spi@07575000 {
+		blsp1_spi0: spi@7575000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07575000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +423,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c0: i2c@075b5000 {
+		blsp2_i2c0: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b5000 0x1000>;
 			interrupts = <GIC_SPI 101 0>;
@@ -441,7 +454,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c1: i2c@075b6000 {
+		blsp2_i2c1: i2c@75b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b6000 0x1000>;
 			interrupts = <GIC_SPI 102 0>;
@@ -466,7 +479,7 @@
 			status = "disabled";
 		};
 
-		blsp1_i2c2: i2c@07577000 {
+		blsp1_i2c2: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07577000 0x1000>;
 			interrupts = <GIC_SPI 97 0>;
@@ -481,7 +494,7 @@
 			status = "disabled";
 		};
 
-		blsp2_spi5: spi@075ba000{
+		blsp2_spi5: spi@75ba000{
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x075ba000 0x600>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +535,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		timer@09840000 {
+		timer@9840000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -819,6 +832,172 @@
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		agnoc@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcie0: qcom,pcie@00600000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+
+				vdda-supply = <&pm8994_l28>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+
+			};
+
+			pcie1: qcom,pcie@00608000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status  = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+
+				vdda-supply = <&pm8994_l28>;
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: qcom,pcie@00610000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+				vdda-supply = <&pm8994_l28>;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
 	};
 
 	adsp-pil {